| Manufacturer | Brandt |
|---|---|
| Model | PROFILINE KDF 560 |
| Year | 2008 |
| Location | Belgium
|
This Brandt PROFILINE KDF 560 is a single-sided edge bander designed for efficient and precise application of edge bands on panels. Manufactured in 2008, it accommodates board thicknesses ranging from 8 to 60 mm and edge thicknesses from 0.4 up to 12 mm. The machine features a feed advance speed of up to 20 m/min, with a limitation to 10 m/min when using the contour trimming function. It is equipped with a sound-proof cabin, providing noise reduction during operation.
The machine includes a pre-milling unit with two shapers, each powered by a 2.2 kW motor, ensuring smooth preparation of panel edges before banding. Edge banding is applied using a hot melt Quickmelt unit, supported by a coil and strip magazine for different edge materials. The pressure zone consists of one driven and two non-driven pneumatically loaded rollers, ensuring consistent edge application.
Trimming operations are comprehensive, featuring end trims with two 0.35 kW motors capable of straight and 15° chamfer cuts, top and bottom trimming with two 0.35 kW motors, radius trimming, and contour trimming units with leading and following edges powered by two 0.35 kW motors. Additional finishing includes a radius scraping unit, glue scrapers, and a buffing unit to ensure a high-quality edge finish.
Workpieces are transported via a chain system with top pressure applied by rubber rollers for stable movement through the machine. The machine is controlled via a PC 20+ system, with a control panel featuring a screen and various buttons located on the left side of the machine.
The unit is housed within a sound-proof cabin and features protective transparent panels on the front side for operator safety and visibility. Multiple access doors and panels along the bottom front provide maintenance access. Internal components, including mechanical, pneumatic, and dust extraction parts, appear clean and well-maintained, with no visible damage. The machine's condition suggests careful upkeep, supporting reliable operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 12 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, motors 2 x 0,35 kW
Radius trimmming
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 72 |
| Last activity | Oct. 31, 2026 |
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 12 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, motors 2 x 0,35 kW
Radius trimmming
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Brandt PROFILINE KDF 560 is a single-sided edge bander designed for efficient and precise application of edge bands on panels. Manufactured in 2008, it accommodates board thicknesses ranging from 8 to 60 mm and edge thicknesses from 0.4 up to 12 mm. The machine features a feed advance speed of up to 20 m/min, with a limitation to 10 m/min when using the contour trimming function. It is equipped with a sound-proof cabin, providing noise reduction during operation.
The machine includes a pre-milling unit with two shapers, each powered by a 2.2 kW motor, ensuring smooth preparation of panel edges before banding. Edge banding is applied using a hot melt Quickmelt unit, supported by a coil and strip magazine for different edge materials. The pressure zone consists of one driven and two non-driven pneumatically loaded rollers, ensuring consistent edge application.
Trimming operations are comprehensive, featuring end trims with two 0.35 kW motors capable of straight and 15° chamfer cuts, top and bottom trimming with two 0.35 kW motors, radius trimming, and contour trimming units with leading and following edges powered by two 0.35 kW motors. Additional finishing includes a radius scraping unit, glue scrapers, and a buffing unit to ensure a high-quality edge finish.
Workpieces are transported via a chain system with top pressure applied by rubber rollers for stable movement through the machine. The machine is controlled via a PC 20+ system, with a control panel featuring a screen and various buttons located on the left side of the machine.
The unit is housed within a sound-proof cabin and features protective transparent panels on the front side for operator safety and visibility. Multiple access doors and panels along the bottom front provide maintenance access. Internal components, including mechanical, pneumatic, and dust extraction parts, appear clean and well-maintained, with no visible damage. The machine's condition suggests careful upkeep, supporting reliable operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 72 |
| Last activity | Oct. 31, 2026 |
кантираща машина Brandt PROFILINE KDF 560
Dýhovačka Brandt PROFILINE KDF 560
Brandt PROFILINE KDF 560 kantbånd
Brandt PROFILINE KDF 560 Gebrauchte Kantenanleimmaschine
edgebander Brandt PROFILINE KDF 560
Brandt PROFILINE KDF 560 edgebander
Canteadora unilateral Brandt PROFILINE KDF 560
Plaqueuse de chants Brandt PROFILINE KDF 560
rubna traka Brandt PROFILINE KDF 560
Brandt PROFILINE KDF 560 élszalag
Bordatrice monolaterale Brandt PROFILINE KDF 560
krašto juosta Brandt PROFILINE KDF 560
Brandt PROFILINE KDF 560 kantenaanlijmer
Używana okleiniarka Brandt PROFILINE KDF 560
bordadeira Brandt PROFILINE KDF 560
placator de canturi Brandt PROFILINE KDF 560
Brandt PROFILINE KDF 560 Кромкооблицовочный станок - односторонний
ivica Brandt PROFILINE KDF 560
Brandt PROFILINE KDF 560 kantbandare
Kenar bantlama makinesi Brandt PROFILINE KDF 560
EN
- Languages
English (GB)