Contact us to receive an offer.
| Manufacturer | Boy |
|---|---|
| Model | 50 T2 |
| Year | 1989 |
| Location | Italy
|
| Category | Injection moulding machines |
| Clamping force | 50 T |
| Tie bar spacing (H) | 305 mm |
| Tie bar spacing (V) | 305 mm |
| Shot volume | 138 cm³ |
| Robot interface | |
| Mould size | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 22/07/2026 |
| Product id | P240704230 |
| Language |
Машина за леене под налягане Boy 50 T2
Vstřikolis Boy 50 T2
Boy 50 T2 Sprøjtestøbemaskine
Boy 50 T2 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Boy 50 T2
Boy 50 T2 injection moulding machine (Silicone)
Inyectora de plástico Boy 50 T2
Presse à injecter Boy 50 T2
Stroj za injekcijsko prešanje Boy 50 T2
Boy 50 T2 Fröccsöntő gép
Pressa ad iniezione Boy 50 T2
Įpurškimo formavimo mašina Boy 50 T2
Boy 50 T2 Spuitgietmachine
Wtryskarka Boy 50 T2
Máquina de injecção Boy 50 T2
Mașină de turnat prin injecție Boy 50 T2
Boy 50 T2 Термопластавтомат
Mašina za brizganje Boy 50 T2
Boy 50 T2 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Boy 50 T2
|
Overview:
Used injection molding machine, model BOY 50 T2, set up with a cylinder configured for silicone moulding. The seller reports the machine is in good condition. It is offered with the technical data listed below.
Technical data:
- Model: BOY 50 T2
- Clamping force: 50 tons
- Year of manufacture: 1989
- Cutting thickness: 38 mm
- Spray weight: 138 cm³
- Distance between tie bars: 30.5 x 30.5 cm
Configuration and operation notes:
The BOY 50 T2 is configured with an injection unit for silicone moulding. At present the machine is not connected to a silicone feeding pump; because of this a complete silicone injection cycle cannot be demonstrated. According to the seller, machine functions and movements can be demonstrated during an on-site inspection.
Condition and inspection:
The machine is described by the seller as being in good condition. Prospective buyers are invited to inspect the machine at the seller’s facility to verify condition and to operate available controls and movements. If you need a full silicone injection cycle to be demonstrated, please note a silicone feeding pump will be required and is not included or connected at this time.
Contact:
For further information, specific questions about the configuration, or to arrange an inspection, please contact the seller via the listing. Additional documentation or details can be requested prior to inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used injection molding machine, model BOY 50 T2, set up with a cylinder for silicone molding. The machine was manufactured in 1989 and is in good condition and fully operational. The machine can be inspected at our facility.
Technical Data:
Model: BOY 50 T2
Clamping force: 50 tons
Year of manufacture: 1989
Cutting thickness: 38 mm
Spray weight: 138 cm³
Distance between tie bars: 30.5 x 30.5 cm
The BOY 50 T2 is configured with an injection unit for silicone moulding and is in good working condition.
At present, the machine is not connected to a silicone feeding pump, so a complete silicone injection cycle cannot be demonstrated. However, all machine functions and movements can be tested during the inspection.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Aug. 6, 2026 |
Used injection molding machine, model BOY 50 T2, set up with a cylinder for silicone molding. The machine was manufactured in 1989 and is in good condition and fully operational. The machine can be inspected at our facility.
Technical Data:
Model: BOY 50 T2
Clamping force: 50 tons
Year of manufacture: 1989
Cutting thickness: 38 mm
Spray weight: 138 cm³
Distance between tie bars: 30.5 x 30.5 cm
The BOY 50 T2 is configured with an injection unit for silicone moulding and is in good working condition.
At present, the machine is not connected to a silicone feeding pump, so a complete silicone injection cycle cannot be demonstrated. However, all machine functions and movements can be tested during the inspection.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Injection moulding machines |
| Clamping force | 50 T |
| Tie bar spacing (H) | 305 mm |
| Tie bar spacing (V) | 305 mm |
| Shot volume | 138 cm³ |
| Robot interface | |
| Mould size | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 22/07/2026 |
| Product id | P240704230 |
| Language |
Машина за леене под налягане Boy 50 T2
Vstřikolis Boy 50 T2
Boy 50 T2 Sprøjtestøbemaskine
Boy 50 T2 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Boy 50 T2
Boy 50 T2 injection moulding machine (Silicone)
Inyectora de plástico Boy 50 T2
Presse à injecter Boy 50 T2
Stroj za injekcijsko prešanje Boy 50 T2
Boy 50 T2 Fröccsöntő gép
Pressa ad iniezione Boy 50 T2
Įpurškimo formavimo mašina Boy 50 T2
Boy 50 T2 Spuitgietmachine
Wtryskarka Boy 50 T2
Máquina de injecção Boy 50 T2
Mașină de turnat prin injecție Boy 50 T2
Boy 50 T2 Термопластавтомат
Mašina za brizganje Boy 50 T2
Boy 50 T2 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Boy 50 T2
|
Overview:
Used injection molding machine, model BOY 50 T2, set up with a cylinder configured for silicone moulding. The seller reports the machine is in good condition. It is offered with the technical data listed below.
Technical data:
- Model: BOY 50 T2
- Clamping force: 50 tons
- Year of manufacture: 1989
- Cutting thickness: 38 mm
- Spray weight: 138 cm³
- Distance between tie bars: 30.5 x 30.5 cm
Configuration and operation notes:
The BOY 50 T2 is configured with an injection unit for silicone moulding. At present the machine is not connected to a silicone feeding pump; because of this a complete silicone injection cycle cannot be demonstrated. According to the seller, machine functions and movements can be demonstrated during an on-site inspection.
Condition and inspection:
The machine is described by the seller as being in good condition. Prospective buyers are invited to inspect the machine at the seller’s facility to verify condition and to operate available controls and movements. If you need a full silicone injection cycle to be demonstrated, please note a silicone feeding pump will be required and is not included or connected at this time.
Contact:
For further information, specific questions about the configuration, or to arrange an inspection, please contact the seller via the listing. Additional documentation or details can be requested prior to inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Aug. 6, 2026 |
EN
- Languages
English (GB)