Contact us to receive an offer.
| Manufacturer | BOY |
|---|---|
| Model | 35T 35E |
| Year | 2013 |
| Location | France
|
Overview
This listing is for a BOY model 35T / 35E injection moulding machine, commissioned in 2013. Tonnage is listed as 35. The machine is finished in a yellow and turquoise color scheme and is equipped with a control panel that includes a display screen.
Injection unit
- Screw diameter: 28 mm
- Calculated injection volume: 58 cm³
- Length/Diameter ratio: 18 L/D
- Pressure on material: 1577 bar
Clamping unit
- Clamping force: 350 kN
- Opening stroke: 300 mm
- Maximum distance between platens: 550 mm
- Passage between columns: 280 x 254 mm
Equipment and accessories
- Pump by servo motor (listed)
- With sprue picker (listed)
- Machine equipped with laminar flow (listed)
Visible components and condition indicators
- Control panel with display screen
- Emergency stop button and warning symbols on the access panel
- Cable bundles and hoses routed along the left side of the machine base
Notes and omissions
- Year of manufacture/commissioning is given as 2013.
- Several specification fields (platen dimensions, number of temperature zones, heating power, installed power, oil quantity, operating hours, weight and external dimensions) are not provided in the supplied data and therefore are not stated here.
- No statements are made about operational condition, testing, refurbishment or warranty because such information is not provided.
If you need additional technical details (electrical power, heating zones, platen sizes, hydraulic oil quantity or machine condition/testing documentation), please request them so the seller can supply measured or recorded values.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Injection unit
Screw diameter: 28 mm
Calculated injection volume: 58 cm3
Length/diameter ratio: 18 L/D
Max injection flow rate: cm3/s
Pressure on material: 1577 bars
PS plasticizing capacity:
Screw speed: RPM
Hydraulic motor torque: Nm
Hydraulic motor power: HP
Number of temperature zones: N
Clamping unit
Clamping force: 350 kN
Opening stroke: 300 mm
Minimum mold thickness: mm
Max distance between platens: 550 mm
Passage between columns: 280 x 254 mm
Platen dimensions: mm
General
Heating power: kW
Total installed power: kW
Oil quantity: L
Dimensions: m
Weight: Kg
Other
Equipment: Pump by servo motor
With sprue picker
Machine equipped with LAMINAR FLOW
Commissioning: 2013
Operating hours: h
Tonnage: 35
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Oct. 29, 2026 |
Injection unit
Screw diameter: 28 mm
Calculated injection volume: 58 cm3
Length/diameter ratio: 18 L/D
Max injection flow rate: cm3/s
Pressure on material: 1577 bars
PS plasticizing capacity:
Screw speed: RPM
Hydraulic motor torque: Nm
Hydraulic motor power: HP
Number of temperature zones: N
Clamping unit
Clamping force: 350 kN
Opening stroke: 300 mm
Minimum mold thickness: mm
Max distance between platens: 550 mm
Passage between columns: 280 x 254 mm
Platen dimensions: mm
General
Heating power: kW
Total installed power: kW
Oil quantity: L
Dimensions: m
Weight: Kg
Other
Equipment: Pump by servo motor
With sprue picker
Machine equipped with LAMINAR FLOW
Commissioning: 2013
Operating hours: h
Tonnage: 35
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This listing is for a BOY model 35T / 35E injection moulding machine, commissioned in 2013. Tonnage is listed as 35. The machine is finished in a yellow and turquoise color scheme and is equipped with a control panel that includes a display screen.
Injection unit
- Screw diameter: 28 mm
- Calculated injection volume: 58 cm³
- Length/Diameter ratio: 18 L/D
- Pressure on material: 1577 bar
Clamping unit
- Clamping force: 350 kN
- Opening stroke: 300 mm
- Maximum distance between platens: 550 mm
- Passage between columns: 280 x 254 mm
Equipment and accessories
- Pump by servo motor (listed)
- With sprue picker (listed)
- Machine equipped with laminar flow (listed)
Visible components and condition indicators
- Control panel with display screen
- Emergency stop button and warning symbols on the access panel
- Cable bundles and hoses routed along the left side of the machine base
Notes and omissions
- Year of manufacture/commissioning is given as 2013.
- Several specification fields (platen dimensions, number of temperature zones, heating power, installed power, oil quantity, operating hours, weight and external dimensions) are not provided in the supplied data and therefore are not stated here.
- No statements are made about operational condition, testing, refurbishment or warranty because such information is not provided.
If you need additional technical details (electrical power, heating zones, platen sizes, hydraulic oil quantity or machine condition/testing documentation), please request them so the seller can supply measured or recorded values.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Oct. 29, 2026 |
Шприцмашина BOY 35T 35E
Vstřikovací lis BOY 35T 35E
BOY 35T 35E Sprøjtestøbemaskine
BOY 35T 35E Spritzgießmaschine
Πρέσα έγχυσης BOY 35T 35E
BOY 35T 35E Injection moulding machine
Inyectora BOY 35T 35E
Presse à injecter BOY 35T 35E
Stroj za injekcijsko prešanje BOY 35T 35E
BOY 35T 35E Fröccsöntőgép
Pressa a iniezione BOY 35T 35E
BOY 35T 35E Įpurškimo liejimo staklės
BOY 35T 35E Spuitgietmachine
Wtryskarka BOY 35T 35E
Injetora BOY 35T 35E
Mașină de injectat BOY 35T 35E
BOY 35T 35E Термопластавтомат
Mašina za injekciono prešanje BOY 35T 35E
BOY 35T 35E Formsprutningsmaskin
Enjeksiyon makinesi BOY 35T 35E
EN
- Languages
English (GB)