Contact us to receive an offer.
| Manufacturer | BOY |
|---|---|
| Model | 350-92 35E |
| Year | 2014 |
| Location | France
|
BOY 350-92 35E injection moulding machine, manufactured in 2014. The machine has a clamping force of 35 T and a 28 mm screw diameter. Its listed shot volume is 59 cm³, shot weight is 54 g, and pressure on material is 1,639 bar. Tie bar spacing is 280 mm horizontally and 254 mm vertically. Overall dimensions are 2,400 × 820 × 950 mm, and the machine weighs 1,195 kg.
The machine has a yellow and turquoise exterior, with a control panel featuring a display and keypad beside the injection and clamping sections. A red stack light is mounted on top. The rear lower area has visible cables and hoses, some coiled or loosely routed. The exposed injection-unit area includes connected hoses, wiring and electrical connectors. Pneumatic components include regulators, filter bowls, valves, tubing and pressure gauges. The clamping mechanism, including a cylinder and polished rods, is behind a transparent protective guard. Emergency-stop and electrical-hazard markings are present; the guard also carries hand-crush and hot-surface hazard pictograms.
Visible surfaces and fittings show some grime, scuffing, discoloration and light marks, including on the transparent guard. The current listing also states that the machine has a laminar-flow option and a “carrot peck” option. Those option descriptions are reproduced as supplied.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
BOY 35 E injection molding machine in good condition
Type : 350-92 35E
Year: 2013
Screw diameter : 28 mm
Injection pressure: 1639 bars
Injectable volume : 58,5 cm³
Weight in PS : 53,2 gr
Clamping Force: 35 Tons
Distance between tie bar bar: 280 x 254 mm
Min mould height : 200 mm
Max daylight between platen : 500 mm
Dimensions: 2400 x 820 x 1950 mm
Weight: 1195 kg
+ BOY option : a laminar flow and carrot peck
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 118 |
| Last activity | Nov. 4, 2026 |
BOY 35 E injection molding machine in good condition
Type : 350-92 35E
Year: 2013
Screw diameter : 28 mm
Injection pressure: 1639 bars
Injectable volume : 58,5 cm³
Weight in PS : 53,2 gr
Clamping Force: 35 Tons
Distance between tie bar bar: 280 x 254 mm
Min mould height : 200 mm
Max daylight between platen : 500 mm
Dimensions: 2400 x 820 x 1950 mm
Weight: 1195 kg
+ BOY option : a laminar flow and carrot peck
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
BOY 350-92 35E injection moulding machine, manufactured in 2014. The machine has a clamping force of 35 T and a 28 mm screw diameter. Its listed shot volume is 59 cm³, shot weight is 54 g, and pressure on material is 1,639 bar. Tie bar spacing is 280 mm horizontally and 254 mm vertically. Overall dimensions are 2,400 × 820 × 950 mm, and the machine weighs 1,195 kg.
The machine has a yellow and turquoise exterior, with a control panel featuring a display and keypad beside the injection and clamping sections. A red stack light is mounted on top. The rear lower area has visible cables and hoses, some coiled or loosely routed. The exposed injection-unit area includes connected hoses, wiring and electrical connectors. Pneumatic components include regulators, filter bowls, valves, tubing and pressure gauges. The clamping mechanism, including a cylinder and polished rods, is behind a transparent protective guard. Emergency-stop and electrical-hazard markings are present; the guard also carries hand-crush and hot-surface hazard pictograms.
Visible surfaces and fittings show some grime, scuffing, discoloration and light marks, including on the transparent guard. The current listing also states that the machine has a laminar-flow option and a “carrot peck” option. Those option descriptions are reproduced as supplied.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 118 |
| Last activity | Nov. 4, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
| Clamping force | 180 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 226 cm³ |
| Pressure on material | 18 bar |
| Equipped with robot | No |
| Opening of the press | 500 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Shot weight | 206 g |
| Bi-metal screw | Yes |
| Robot interface | euromap 67 |
| Mould size |
| Clamping force | 700 T |
|---|---|
| Tie bar spacing (H) | 1000 mm |
| Shot volume | 6785 cm³ |
| Platen length | 1410 mm |
| Bi-metal screw | Yes |
| Number of cores | 2 |
| Mould size |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | 900 mm |
| Pressure on material | 1620 bar |
| Platen width | 1310 mm |
| Robot interface | |
| Opening of the press | 1000 mm |
| Clamping force | 330 T |
|---|---|
| Tie bar spacing (H) | 700 mm |
| Shot weight | 800 g |
| Platen length | 990 mm |
| Bi-metal screw | Yes |
| Robot interface | euro map |
| Number of heating zones | 5 |
| Mould size | 660/600 |
| Screw diameter | 60 mm |
|---|---|
| Shot volume | 880 cm³ |
| Pressure on material | 2390 bar |
| Platen width | 990 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 640 mm |
France
2008
| Clamping force | 700 T |
|---|---|
| Tie bar spacing (H) | 1120 mm |
| Shot volume | 3925 cm³ |
| Pressure on material | 1670 bar |
| Platen width | 1310 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Screw diameter | 100 mm |
|---|---|
| Tie bar spacing (V) | 1020 mm |
| Shot weight | 3570 g |
| Platen length | 1410 mm |
| Bi-metal screw | Yes |
| Number of cores | 2 |
| Opening of the press | 2000 mm |
| Clamping force | 270 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 850 cm³ |
| Pressure on material | 1700 bar |
| Platen width | 880 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 760 g |
| Platen length | 940 mm |
| Equipped with robot | Yes |
| Opening of the press | 3000 mm |
| Clamping force | 260 T |
|---|---|
| Tie bar spacing (H) | 575 mm |
| Shot volume | 848 cm³ |
| Pressure on material | 1610 bar |
| Platen width | 835 mm |
| Opening of the press | 405 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 575 mm |
| Shot weight | 800 g |
| Platen length | 835 mm |
| Robot interface | |
| Mould size |
| Clamping force | 1450 T |
|---|---|
| Tie bar spacing (H) | 1300 mm |
| Shot volume | 12720 cm³ |
| Pressure on material | 1400 bar |
| Platen width | 2220 mm |
| Robot interface | E67 |
| Number of heating zones | 1 |
| Mould size | 600-1600 |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1520 mm |
| Shot weight | 11700 g |
| Platen length | 2000 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 3100 mm |
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (V) | 660 mm |
| Robot interface |
| Tie bar spacing (H) | 710 mm |
|---|---|
| Shot weight | 992 g |
| Mould size |
| Clamping force | 230 T |
|---|---|
| Tie bar spacing (V) | 510 mm |
| Robot interface |
| Tie bar spacing (H) | 560 mm |
|---|---|
| Shot weight | 450 g |
| Mould size |
Czech Republic
2004
| Clamping force | 22 T |
|---|---|
| Tie bar spacing (H) | 254 mm |
| Shot volume | 30 cm³ |
| Pressure on material | 1732 bar |
| Platen width | 245 mm |
| Equipped with robot | No |
| Opening of the press | 200 mm |
| Screw diameter | 17.5 mm |
|---|---|
| Tie bar spacing (V) | 254 mm |
| Shot weight | 27 g |
| Platen length | 400 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
United Kingdom
2002
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 410 mm |
| Shot volume | 200.8 cm³ |
| Pressure on material | 1173 bar |
| Platen width | 560 mm |
| Opening of the press | 430 mm |
| Screw diameter | 42 mm |
|---|---|
| Tie bar spacing (V) | 358 mm |
| Shot weight | 179 g |
| Platen length | 560 mm |
| Robot interface | |
| Mould size |
United Kingdom
2004
| Clamping force | 12 T |
|---|---|
| Tie bar spacing (H) | 259 mm |
| Shot volume | 6.1 cm³ |
| Pressure on material | 2413 bar |
| Platen width | 200 mm |
| Number of cores | |
| Opening of the press | 200 mm |
| Screw diameter | 14 mm |
|---|---|
| Tie bar spacing (V) | 259 mm |
| Shot weight | 5.6 g |
| Platen length | 400 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size | 100/300 |
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 460 mm |
| Shot volume | 760 cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 460 mm |
| Shot weight | 810 g |
| Platen length | mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 320 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 1150 cm³ |
| Platen length | 970 mm |
| Robot interface |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Pressure on material | 1700 bar |
| Platen width | 1000 mm |
| Mould size |
| Clamping force | 175 T |
|---|---|
| Shot volume | 394 cm³ |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Pressure on material | 1695 bar |
| Mould size |
| Clamping force | 1450 T |
|---|---|
| Tie bar spacing (H) | 1300 mm |
| Shot volume | 12730 cm³ |
| Pressure on material | 1400 bar |
| Platen width | 2200 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 1600 mm |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1520 mm |
| Shot weight | 11465 g |
| Platen length | 2200 mm |
| Bi-metal screw | Yes |
| Robot interface | EUROMAP 67 |
| Number of heating zones | 5 |
| Mould size | 1600-600 |
| Clamping force | 1500 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 1250 cm³ |
| Mould size | 600/1500 |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1250 mm |
| Robot interface |
| Clamping force | 430 T |
|---|---|
| Tie bar spacing (H) | 760 mm |
| Shot volume | 1587 cm³ |
| Mould size | 250 - 800 |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Robot interface |
Ukraine
2008
| Clamping force | 780 T |
|---|---|
| Shot volume | 3927 cm³ |
| Platen width | 1430 mm |
| Mould size |
| Screw diameter | 100 mm |
|---|---|
| Platen length | 1430 mm |
| Robot interface |
| Clamping force | 210 T |
|---|---|
| Shot volume | 660 cm³ |
| Mould size |
| Screw diameter | 52 mm |
|---|---|
| Robot interface |
| Clamping force | 2100 T |
|---|---|
| Shot volume | 285 cm³ |
| Pressure on material | 2100 bar |
| Number of heating zones | 3 |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Shot weight | 260 g |
| Robot interface | |
| Opening of the press | 540 mm |
Poland
2013
| Shot volume | 65 cm³ |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 510 mm |
| Shot weight | 340 g |
| Robot interface | |
| Mould size | 170-550 |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 1780 bar |
| Opening of the press | 460 mm |
United Kingdom
2016
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (V) | 480 mm |
| Robot interface |
| Tie bar spacing (H) | 440 mm |
|---|---|
| Shot weight | 162 g |
| Mould size |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 510 mm |
| Shot weight | 330 g |
| Robot interface | |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 1700 bar |
| Opening of the press | 457 mm |
| Clamping force | 55 T |
|---|---|
| Tie bar spacing (H) | 315 mm |
| Pressure on material | 1400 bar |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 280 mm |
| Robot interface |
| Clamping force | 210 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 640 cm³ |
| Pressure on material | 2000 bar |
| Platen width | mm |
| Robot interface | |
| Number of heating zones | |
| Mould size | 200 - 630 |
| Screw diameter | 52 mm |
|---|---|
| Tie bar spacing (V) | 510 mm |
| Shot weight | g |
| Platen length | mm |
| Equipped with robot | Yes |
| Number of cores | |
| Opening of the press | 540 mm |
Italy
2001
| Clamping force | 70 T |
|---|---|
| Tie bar spacing (H) | 360 mm |
| Shot weight | 109 g |
| Robot interface |
| Screw diameter | 32 mm |
|---|---|
| Tie bar spacing (V) | 315 mm |
| Pressure on material | 1700 bar |
| Mould size |
Шприцмашина BOY 350-92 35E
Vstřikovací lis BOY 350-92 35E
BOY 350-92 35E Sprøjtestøbemaskine
BOY 350-92 35E Spritzgießmaschine
Πρέσα έγχυσης BOY 350-92 35E
BOY 35 E injection molding machine in good condition 35 Tons
Inyectora BOY 350-92 35E
Presse à injecter BOY 350-92 35E
Stroj za injekcijsko prešanje BOY 350-92 35E
BOY 350-92 35E Fröccsöntőgép
Pressa a iniezione BOY 350-92 35E
BOY 350-92 35E Įpurškimo liejimo staklės
BOY 350-92 35E Spuitgietmachine
Wtryskarka BOY 350-92 35E
Injetora BOY 350-92 35E
Mașină de injectat BOY 350-92 35E
BOY 350-92 35E Термопластавтомат
Mašina za injekciono prešanje BOY 350-92 35E
BOY 350-92 35E Formsprutningsmaskin
Enjeksiyon makinesi BOY 350-92 35E
Romania
Slovenia
Turkey
Spain
EN
- Languages
English (GB)