Contact us to receive an offer.
| Manufacturer | Bilion |
|---|---|
| Model | 50T SELECT H 80 TP DIXIT 3 |
| Year | 2011 |
| Location | France
|
Overview
This is an injection module with detailed technical parameters listed in the original description. Below is a systematic summary of the available data for the main features of the injection and clamping units, as well as general parameters and additional equipment. Some fields in the description do not contain values and are marked as unspecified.
Injection Module
- Screw diameter: 25 mm
- Calculated injection volume (shot): 39 cm³
- L/D ratio: 20 L/D
- Maximum injection flow rate: 98 cm³/s
- Material pressure: 2040 bar
- Plastification capacity for PS: unspecified
- Screw speed: unspecified (rpm)
- Hydraulic motor torque: unspecified (Nm)
- Hydraulic motor power: unspecified (HP)
- Number of temperature zones: unspecified
Clamping Mechanism
- Clamping force: 500 kN
- Opening stroke: 250 mm
- Minimum mold thickness: 150 mm
- Maximum distance between plates: 650 mm
- Distance between columns: 350 x 300 mm
- Plate dimensions: 440 x 490 mm
General Features and Equipment
- Heater system power: unspecified (kW)
- Total installed power: 29 kW
- Oil quantity: unspecified (L)
- Dimensions: unspecified (m)
- Weight: unspecified (Kg)
- Equipment: 4 hydraulic cores
- Quality control cover
- Commissioning year: 2011
- Operating hours: unspecified (h)
- Tonnage: 50
Notes
- The description contains several unfilled fields (e.g., screw speed, plastification capacity, oil quantity, dimensions, and weight). If these data are critical for your decision, it is advisable to request additional information from the seller.
- No data regarding service history, tests, condition at sale, or warranty are provided; such claims are not included in the available description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Unité d'injection
Diamètre de vis : 25 mm
Volume d'injection calculé : 39 cm3
Rapport longueur/diamètre : 20 L/D
Débit d'injection maxi : 98 cm3/s
Pression sur la matière : 2040 bars
Capacité de plastification PS :
Vitesse Vis : RPM
Couple moteur hydraulique : Nm
Puissance moteur hydraulique : HP
Nb Zone de température : N
Unité de fermeture
Force de fermeture : 500 kN
Course ouverture : 250 mm
Epaisseur moule mini : 150 mm
Distance max entre plateau : 650 mm
Passage entre colonnes : 350 x 300 mm
Dimension des plateaux : 440 x 490 mm
Général
Puissance de chauffage : kW
Puissance totale installée : 29 kW
Quantité d'huile : L
Dimensions : m
Poids : Kg
Autre
Équipement : 4 Noyaux hydrauliques
Trappe qualité
Mise en service : 2011
Nombres d'heures : h
Tonnage : 50
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Oct. 28, 2026 |
Unité d'injection
Diamètre de vis : 25 mm
Volume d'injection calculé : 39 cm3
Rapport longueur/diamètre : 20 L/D
Débit d'injection maxi : 98 cm3/s
Pression sur la matière : 2040 bars
Capacité de plastification PS :
Vitesse Vis : RPM
Couple moteur hydraulique : Nm
Puissance moteur hydraulique : HP
Nb Zone de température : N
Unité de fermeture
Force de fermeture : 500 kN
Course ouverture : 250 mm
Epaisseur moule mini : 150 mm
Distance max entre plateau : 650 mm
Passage entre colonnes : 350 x 300 mm
Dimension des plateaux : 440 x 490 mm
Général
Puissance de chauffage : kW
Puissance totale installée : 29 kW
Quantité d'huile : L
Dimensions : m
Poids : Kg
Autre
Équipement : 4 Noyaux hydrauliques
Trappe qualité
Mise en service : 2011
Nombres d'heures : h
Tonnage : 50
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This is an injection module with detailed technical parameters listed in the original description. Below is a systematic summary of the available data for the main features of the injection and clamping units, as well as general parameters and additional equipment. Some fields in the description do not contain values and are marked as unspecified.
Injection Module
- Screw diameter: 25 mm
- Calculated injection volume (shot): 39 cm³
- L/D ratio: 20 L/D
- Maximum injection flow rate: 98 cm³/s
- Material pressure: 2040 bar
- Plastification capacity for PS: unspecified
- Screw speed: unspecified (rpm)
- Hydraulic motor torque: unspecified (Nm)
- Hydraulic motor power: unspecified (HP)
- Number of temperature zones: unspecified
Clamping Mechanism
- Clamping force: 500 kN
- Opening stroke: 250 mm
- Minimum mold thickness: 150 mm
- Maximum distance between plates: 650 mm
- Distance between columns: 350 x 300 mm
- Plate dimensions: 440 x 490 mm
General Features and Equipment
- Heater system power: unspecified (kW)
- Total installed power: 29 kW
- Oil quantity: unspecified (L)
- Dimensions: unspecified (m)
- Weight: unspecified (Kg)
- Equipment: 4 hydraulic cores
- Quality control cover
- Commissioning year: 2011
- Operating hours: unspecified (h)
- Tonnage: 50
Notes
- The description contains several unfilled fields (e.g., screw speed, plastification capacity, oil quantity, dimensions, and weight). If these data are critical for your decision, it is advisable to request additional information from the seller.
- No data regarding service history, tests, condition at sale, or warranty are provided; such claims are not included in the available description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Oct. 28, 2026 |
Електрическа шприцмашина Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Elektrický vstřikovací lis Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Elektrisk sprøjtestøbemaskine
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Elektrische Spritzgießmaschine
Ηλεκτρική πρέσα έγχυσης Bilion BILLION 50T SELECT H 80 TP DIXIT 3
BILLION 50T SELECT H 80 TP DIXIT 3 Electric injection moulding machine
Inyectora eléctrica Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Presse à injecter électrique Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Električni stroj za injekcijsko prešanje Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Elektromos fröccsöntőgép
Pressa a iniezione elettrica Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Elektrinės įpurškimo liejimo staklės
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Elektrische spuitgietmachine
Wtryskarka elektryczna Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Injetora elétrica Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Mașină electrică de injectat Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Электрический термопластавтомат
Električna mašina za injekciono prešanje Bilion BILLION 50T SELECT H 80 TP DIXIT 3
Bilion BILLION 50T SELECT H 80 TP DIXIT 3 Elektrisk formsprutningsmaskin
Elektrikli enjeksiyon makinesi Bilion BILLION 50T SELECT H 80 TP DIXIT 3
EN
- Languages
English (GB)