| Manufacturer | BIESSE |
|---|---|
| Model | Selco WNTR 600 |
| Year | 2002 |
| Location | Spain
|
BIESSE Selco WNTR 600 panel saw (year 2002). Key machine data: model Selco WNTR 600 by BIESSE, max cutting length 4500 mm, main saw blade diameter 430 mm, engine power 18.0 kW, and scoring unit included. Control system listed as OSI (Open Selco Interface) / OSI Plus numerical control. The machine is described as an angular panel sizing system configured for automatic rip and cross-cutting with two orthogonal cutting lines and independent pneumatic pusher grippers.
Notable components and features present: an operator control console with a screen, keyboard and multiple pushbuttons/knobs; multiple perforated and roller support beds and parallel roller tables for panel handling; a dense grid of small wheel/roller assemblies across the machine bed; several round vacuum/pallet pods positioned on the table; and pneumatic/electrical actuators, wiring harnesses and flexible hoses routed along the bed. There is also a long toothed/serrated belt or linear guide along the bed edge and visible yellow-and-black hazard striping at the machine opening along with warning labels on some pod housings.
Condition notes: the roller assemblies and bed show visible dust and surface debris; prospective buyers should inspect these areas and the mechanical components in person for wear and cleanliness. No claims are made about testing, operational status or warranty. The listing provides core specifications and a summary of equipment and fittings; inspect onsite or request additional documentation or verification for machine condition, options and controls before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details.Max. blade projection: 120–132 mm
Cutting lengths: 3,200 / 3,800 / 4,500 mm
Main saw motor: 13.5–18 kW
Main saw blade diameter: 430 mm
Scoring saw blade diameter: 200 mm
Saw carriage speed: up to 150 m/min (brushless drives)
Pusher speed: up to 90 m/min
Pusher grippers: independent pneumatic grippers
Control system: OSI (Open Selco Interface) / OSI Plus numerical control
Machine layout: angular panel sizing system with two orthogonal cutting lines for automatic rip and cross-cutting
Max. Cutting Length: 4500 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details.Max. blade projection: 120–132 mm
Cutting lengths: 3,200 / 3,800 / 4,500 mm
Main saw motor: 13.5–18 kW
Main saw blade diameter: 430 mm
Scoring saw blade diameter: 200 mm
Saw carriage speed: up to 150 m/min (brushless drives)
Pusher speed: up to 90 m/min
Pusher grippers: independent pneumatic grippers
Control system: OSI (Open Selco Interface) / OSI Plus numerical control
Machine layout: angular panel sizing system with two orthogonal cutting lines for automatic rip and cross-cutting
Max. Cutting Length: 4500 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
BIESSE Selco WNTR 600 panel saw (year 2002). Key machine data: model Selco WNTR 600 by BIESSE, max cutting length 4500 mm, main saw blade diameter 430 mm, engine power 18.0 kW, and scoring unit included. Control system listed as OSI (Open Selco Interface) / OSI Plus numerical control. The machine is described as an angular panel sizing system configured for automatic rip and cross-cutting with two orthogonal cutting lines and independent pneumatic pusher grippers.
Notable components and features present: an operator control console with a screen, keyboard and multiple pushbuttons/knobs; multiple perforated and roller support beds and parallel roller tables for panel handling; a dense grid of small wheel/roller assemblies across the machine bed; several round vacuum/pallet pods positioned on the table; and pneumatic/electrical actuators, wiring harnesses and flexible hoses routed along the bed. There is also a long toothed/serrated belt or linear guide along the bed edge and visible yellow-and-black hazard striping at the machine opening along with warning labels on some pod housings.
Condition notes: the roller assemblies and bed show visible dust and surface debris; prospective buyers should inspect these areas and the mechanical components in person for wear and cleanliness. No claims are made about testing, operational status or warranty. The listing provides core specifications and a summary of equipment and fittings; inspect onsite or request additional documentation or verification for machine condition, options and controls before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Форматно-разкройна машина BIESSE Selco WNTR 600
Formátovací pila BIESSE Selco WNTR 600
BIESSE Selco WNTR 600 Pladesav
BIESSE Selco WNTR 600 Plattensäge
Πριόνι πάνελ BIESSE Selco WNTR 600
BIESSE Selco WNTR 600 Panel saw
Seccionadora BIESSE Selco WNTR 600
Scie à panneaux BIESSE Selco WNTR 600
Formatna pila BIESSE Selco WNTR 600
BIESSE Selco WNTR 600 Lapszabászgép
Sezionatrice BIESSE Selco WNTR 600
BIESSE Selco WNTR 600 Plokščių pjovimo staklės
BIESSE Selco WNTR 600 Paneelzaag
Piła panelowa BIESSE Selco WNTR 600
Seccionadora BIESSE Selco WNTR 600
Mașină de debitat panouri BIESSE Selco WNTR 600
BIESSE Selco WNTR 600 Форматно-раскроечная пила
Formatna testera BIESSE Selco WNTR 600
BIESSE Selco WNTR 600 Panelsåg
Panel kesme makinesi BIESSE Selco WNTR 600
EN
- Languages
English (GB)