Contact us to receive an offer.
| Manufacturer | Biesse |
|---|---|
| Model | Rover A 1632 Smart |
| Year | 2017 |
| Location | Sweden
|
Biesse Rover A Smart 1632 numerically controlled woodworking machining centre. The machine is described with centralized manual lubrication, a Windows-based PC numerical control, EC-UKCA safety devices and provision for integration with factory systems in an Industry 4.0 environment.
The stated working fields are X = 3280 mm and Y = 1580–1660 mm, depending on working conditions. The stated Z working height is 200 mm with the 5-axis unit and boring unit using H=74 mm modules, or 245 mm with H=29 mm modules. The loadable workpiece width is stated as Y = 1900 mm. Working tables are not included; the stated table length is 1280 mm. The machine has a vacuum system with 2 areas and an auxiliary vacuum system with 2 areas, plus an RM850 remote keyboard.
The listed configuration is Configuration 2. The machine is compatible with a 16-position Revolver toolchanger and a 12-position side Rack toolchanger; the toolchangers can also be retrofitted. Listed table and positioning equipment includes 6 ATS panel supports with 18 sliding bases, back-line stops with a 115 mm stroke and 25 mm extension, and middle-line stops positioned at 1190 mm with a 140 mm stroke. The quantity of middle-line stops depends on the total number of selected working tables. Also listed are 4 side stops with a 140 mm stroke (2 left-hand and 2 right-hand) and a pneumatic system, 16 sensors for detecting lowered stops, and 4 lifting-bar supports for easier loading, for H=74 mm modules.
Vacuum equipment includes a 250 m³/h rotary-claw vacuum pump, 12 vacuum modules sized 132 × 146 mm, 6 modules sized 132 × 75 mm, and 6 modules sized 132 × 54 mm. The modules are specified with H=74 mm, high-friction surfaces and integrated vacuum seals. The 132 × 146 mm modules rotate through 360 degrees in 15-degree steps. The 132 × 75 mm and 132 × 54 mm modules are also described as prepared for needles.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
other woodworking machinery
other machinery
Numerically controlled machining centres ROVER A SMART - Centralized manual lubrication
system- PC-based numerical control with Windows - EC-UKCA Safety devices - Industry 4.0 -
Integration with factory systems
Numerically controlled machining centre ROVER A SMART 1632Working fields : X = 3280 mm; Y =
from 1580 to 1660 mm, according to working conditionsZ = 200 mm - 5 axes unit and boring
unit, with modules H=74 mmZ = 245 mm - 5 axes unit and boring unit, with modules H=29
mmLoadable piece: Y = 1900 mm Length of the working tables (not included) = 1280 mmVacuum
system - 2 areasAuxiliary vacuum system - 2 areasRM850 remote keyboard
1 7800151 Configuration 2Compatible with the Revolver toolchanger with 16 places and the side Rack
toolchanger with 12 places.The toolchangers can also be retrofitted.
1 7300725 6 ATS panel supports - 18 sliding bases
6 7350943 Stop of the back line with a stroke of 115 mm and extension of 25 mm
6 7350957 Stop of the middle line, positioned at 1190 mm, with a stroke of 140 mm* Quantity depending
from the total selected working tables
1 7350191 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system.
16 7350960 Sensor for the detection of lowered stops
1 7350946 4 lifting bar supports for loading ease - H=74mm modules.
1 7300804 250 m3/h rotary claws vacuum pump
12 7350990 Vacuum module - Size 132x146 - H74mm, with high friction surface and integrated sealing
gasket of the vacuum.It can be rotated through 360 degrees, with a step of 15 degrees
6 7350992 Vacuum module - Size 132x75 - H74mm, with high friction surface, integrated sealing gasket of
the vacuum and prearrangement for needles. It can be rotated through 360 degree, with a step
of 15 degree
6 7350993 Vacuum module - Size 132x54 - H74mm, with high friction surface, integrated sealing gasket of
the vacuum and prearrangement for needles. It c
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 27 |
| Last activity | Nov. 3, 2026 |
other woodworking machinery
other machinery
Numerically controlled machining centres ROVER A SMART - Centralized manual lubrication
system- PC-based numerical control with Windows - EC-UKCA Safety devices - Industry 4.0 -
Integration with factory systems
Numerically controlled machining centre ROVER A SMART 1632Working fields : X = 3280 mm; Y =
from 1580 to 1660 mm, according to working conditionsZ = 200 mm - 5 axes unit and boring
unit, with modules H=74 mmZ = 245 mm - 5 axes unit and boring unit, with modules H=29
mmLoadable piece: Y = 1900 mm Length of the working tables (not included) = 1280 mmVacuum
system - 2 areasAuxiliary vacuum system - 2 areasRM850 remote keyboard
1 7800151 Configuration 2Compatible with the Revolver toolchanger with 16 places and the side Rack
toolchanger with 12 places.The toolchangers can also be retrofitted.
1 7300725 6 ATS panel supports - 18 sliding bases
6 7350943 Stop of the back line with a stroke of 115 mm and extension of 25 mm
6 7350957 Stop of the middle line, positioned at 1190 mm, with a stroke of 140 mm* Quantity depending
from the total selected working tables
1 7350191 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system.
16 7350960 Sensor for the detection of lowered stops
1 7350946 4 lifting bar supports for loading ease - H=74mm modules.
1 7300804 250 m3/h rotary claws vacuum pump
12 7350990 Vacuum module - Size 132x146 - H74mm, with high friction surface and integrated sealing
gasket of the vacuum.It can be rotated through 360 degrees, with a step of 15 degrees
6 7350992 Vacuum module - Size 132x75 - H74mm, with high friction surface, integrated sealing gasket of
the vacuum and prearrangement for needles. It can be rotated through 360 degree, with a step
of 15 degree
6 7350993 Vacuum module - Size 132x54 - H74mm, with high friction surface, integrated sealing gasket of
the vacuum and prearrangement for needles. It c
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Biesse Rover A Smart 1632 numerically controlled woodworking machining centre. The machine is described with centralized manual lubrication, a Windows-based PC numerical control, EC-UKCA safety devices and provision for integration with factory systems in an Industry 4.0 environment.
The stated working fields are X = 3280 mm and Y = 1580–1660 mm, depending on working conditions. The stated Z working height is 200 mm with the 5-axis unit and boring unit using H=74 mm modules, or 245 mm with H=29 mm modules. The loadable workpiece width is stated as Y = 1900 mm. Working tables are not included; the stated table length is 1280 mm. The machine has a vacuum system with 2 areas and an auxiliary vacuum system with 2 areas, plus an RM850 remote keyboard.
The listed configuration is Configuration 2. The machine is compatible with a 16-position Revolver toolchanger and a 12-position side Rack toolchanger; the toolchangers can also be retrofitted. Listed table and positioning equipment includes 6 ATS panel supports with 18 sliding bases, back-line stops with a 115 mm stroke and 25 mm extension, and middle-line stops positioned at 1190 mm with a 140 mm stroke. The quantity of middle-line stops depends on the total number of selected working tables. Also listed are 4 side stops with a 140 mm stroke (2 left-hand and 2 right-hand) and a pneumatic system, 16 sensors for detecting lowered stops, and 4 lifting-bar supports for easier loading, for H=74 mm modules.
Vacuum equipment includes a 250 m³/h rotary-claw vacuum pump, 12 vacuum modules sized 132 × 146 mm, 6 modules sized 132 × 75 mm, and 6 modules sized 132 × 54 mm. The modules are specified with H=74 mm, high-friction surfaces and integrated vacuum seals. The 132 × 146 mm modules rotate through 360 degrees in 15-degree steps. The 132 × 75 mm and 132 × 54 mm modules are also described as prepared for needles.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 27 |
| Last activity | Nov. 3, 2026 |
CNC дървообработващ център Biesse Rover A 1632 Smart
CNC obráběcí centrum na dřevo Biesse Rover A 1632 Smart
Biesse Rover A 1632 Smart CNC-træbearbejdningscenter
Biesse Rover A 1632 Smart CNC-Holzbearbeitungszentrum
Κέντρο κατεργασίας CNC ξύλου Biesse Rover A 1632 Smart
Biesse Rover A 1632 Smart Wood CNC machining center
Centro de mecanizado CNC para madera Biesse Rover A 1632 Smart
Centre d’usinage CNC bois Biesse Rover A 1632 Smart
CNC obradno središte za drvo Biesse Rover A 1632 Smart
Biesse Rover A 1632 Smart CNC faipari megmunkálóközpont
Centro di lavoro CNC per legno Biesse Rover A 1632 Smart
Biesse Rover A 1632 Smart CNC medienos apdirbimo centras
Biesse Rover A 1632 Smart CNC-houtbewerkingscentrum
CNC centrum obróbcze do drewna Biesse Rover A 1632 Smart
Centro de usinagem CNC para madeira Biesse Rover A 1632 Smart
Centru de prelucrare CNC pentru lemn Biesse Rover A 1632 Smart
Biesse Rover A 1632 Smart Деревообрабатывающий обрабатывающий центр с ЧПУ
CNC obradni centar za drvo Biesse Rover A 1632 Smart
Biesse Rover A 1632 Smart CNC-träbearbetningscenter
CNC ahşap işleme merkezi Biesse Rover A 1632 Smart
EN
- Languages
English (GB)