Bekum BAE 1 Blowmoulding machine

Verified seller

Price on request

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer Bekum
Model BAE 1
Year 1984
Location Ireland IE
Jérémie
Your dedicated contact
Jérémie R.

Automatic description (AI-Generated)

Offer Title: Bekum BAE 1 Blowmoulding Machine

Manufacturer: Bekum
Model: BAE 1
Year of Manufacture: 1984

This Bekum BAE 1 blowmoulding machine is designed for producing containers with a volume capacity of 1.5 liters. It features 2 extrusion heads and 1 station, enabling efficient blowmoulding operations. The machine is equipped with an extruder type S 60/20D, powered by a DC motor controlled via a Hitachi frequency controller. The extrusion head configuration includes a double head set 100 mm center to center, complemented by parison control to ensure precision during the moulding process.

The machine operates with a closing force of approximately 30 kN (around 3 metric tons), suitable for a range of blowmoulding applications. Electrical specifications include a voltage rating of 380V and a frequency of 50 Hz.

Control of the machine is relay-based, and the system includes a cold cut flick knife and a waste punch for handling excess material. Pneumatic valves have been upgraded to Festo valves, enhancing operational reliability. The machine reportedly has no oil or air leakages.

From visual inspection, the machine shows signs of use with some visible wear and dirt on its surfaces, consistent with typical industrial equipment in operation. The base is green with yellow safety mesh guards, and the control panel is mounted on an orange frame, featuring multiple buttons, switches, indicator lights, and a red emergency stop button for safety. Pneumatic and hydraulic components are connected via black electrical cables and blue pneumatic tubes. A large motor is mounted on top of the green machine housing, with blue and red pipes and valves attached, and a white electrical box is mounted on the left side.

Please note that the machine is offered as-is, where-is, with information provided by the owner and no independent inspection performed. Payment is required 100% prior to shipment, and the right of prior sale is reserved. The machine is located in Western Europe.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Offer Title: Bekum BAE 1 Blowmoulding Machine

Manufacturer: Bekum
Model: BAE 1
Year of Manufacture: 1984
Technical Condition: As-is, where-is
Volume: 1.5 liters
Number of Heads: 2
Number of Stations: 1

Extruder: S 60/20D with DC-motor and Hitachi frequency controller
Control: Relay
Extrusion Head: Double head 100 mm center to center with parison control
Closing Force: 30 kN (approximately 3 metric tons)

Additional Information:
- Voltage: 380V
- Frequency: 50 Hz
- Location: West Europe
- Payment: 100% prior to shipment
- Right of prior sale reserved

Additional Features:
- Cold cut flick knife
- Waste punch
- Pneumatic valves replaced with Festo valves
- No leakages on oil or air

Information provided by the owner. No own inspection was made.

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Frequently Asked Questions (AI-Generated)

  • When was this Bekum BAE 1 blow molding machine manufactured?

  • This Bekum BAE 1 blow molding machine was manufactured in 1984.

  • Is this blow molding machine currently in good condition?

  • This Bekum BAE 1 blow molding machine is in good condition and was in production until recently.

  • Is this Bekum BAE 1 currently operational?

  • This Bekum BAE 1 blow molding machine is currently connected and can be seen in operation.

  • What is the condition of the Bekum BAE 1?

  • The condition of the Bekum BAE 1 blow molding machine is good and it is immediately operational.

  • What year was this Bekum BAE 1 blow molding machine manufactured?

  • This Bekum BAE 1 blow molding machine was manufactured in 1984.

  • Is the equipment currently connected and operational?

  • This equipment is still connected and can be viewed in operation.

The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


Client type Machinery dealer
Active since 2020
Offers online 30
Last activity Nov. 14, 2026

Seller's description

Offer Title: Bekum BAE 1 Blowmoulding Machine

Manufacturer: Bekum
Model: BAE 1
Year of Manufacture: 1984
Technical Condition: As-is, where-is
Volume: 1.5 liters
Number of Heads: 2
Number of Stations: 1

Extruder: S 60/20D with DC-motor and Hitachi frequency controller
Control: Relay
Extrusion Head: Double head 100 mm center to center with parison control
Closing Force: 30 kN (approximately 3 metric tons)

Additional Information:
- Voltage: 380V
- Frequency: 50 Hz
- Location: West Europe
- Payment: 100% prior to shipment
- Right of prior sale reserved

Additional Features:
- Cold cut flick knife
- Waste punch
- Pneumatic valves replaced with Festo valves
- No leakages on oil or air

Information provided by the owner. No own inspection was made.

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Frequently Asked Questions (AI-Generated)

  • When was this Bekum BAE 1 blow molding machine manufactured?

  • This Bekum BAE 1 blow molding machine was manufactured in 1984.

  • Is this blow molding machine currently in good condition?

  • This Bekum BAE 1 blow molding machine is in good condition and was in production until recently.

  • Is this Bekum BAE 1 currently operational?

  • This Bekum BAE 1 blow molding machine is currently connected and can be seen in operation.

  • What is the condition of the Bekum BAE 1?

  • The condition of the Bekum BAE 1 blow molding machine is good and it is immediately operational.

  • What year was this Bekum BAE 1 blow molding machine manufactured?

  • This Bekum BAE 1 blow molding machine was manufactured in 1984.

  • Is the equipment currently connected and operational?

  • This equipment is still connected and can be viewed in operation.

The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.



Automatic description (AI-Generated)

Offer Title: Bekum BAE 1 Blowmoulding Machine

Manufacturer: Bekum
Model: BAE 1
Year of Manufacture: 1984

This Bekum BAE 1 blowmoulding machine is designed for producing containers with a volume capacity of 1.5 liters. It features 2 extrusion heads and 1 station, enabling efficient blowmoulding operations. The machine is equipped with an extruder type S 60/20D, powered by a DC motor controlled via a Hitachi frequency controller. The extrusion head configuration includes a double head set 100 mm center to center, complemented by parison control to ensure precision during the moulding process.

The machine operates with a closing force of approximately 30 kN (around 3 metric tons), suitable for a range of blowmoulding applications. Electrical specifications include a voltage rating of 380V and a frequency of 50 Hz.

Control of the machine is relay-based, and the system includes a cold cut flick knife and a waste punch for handling excess material. Pneumatic valves have been upgraded to Festo valves, enhancing operational reliability. The machine reportedly has no oil or air leakages.

From visual inspection, the machine shows signs of use with some visible wear and dirt on its surfaces, consistent with typical industrial equipment in operation. The base is green with yellow safety mesh guards, and the control panel is mounted on an orange frame, featuring multiple buttons, switches, indicator lights, and a red emergency stop button for safety. Pneumatic and hydraulic components are connected via black electrical cables and blue pneumatic tubes. A large motor is mounted on top of the green machine housing, with blue and red pipes and valves attached, and a white electrical box is mounted on the left side.

Please note that the machine is offered as-is, where-is, with information provided by the owner and no independent inspection performed. Payment is required 100% prior to shipment, and the right of prior sale is reserved. The machine is located in Western Europe.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2020
Offers online 30
Last activity Nov. 14, 2026

Here is a selection of similar machines - Bekum BAE 1


Used Bekum Blow Moulding Machines for Sale

Find used Bekum blow moulding machines on Exapro, including HBD and EBLOW extrusion blow machines for bottles, canisters, and industrial containers. Filter listings by article size, head configuration, and year from the Berlin pioneer.

Bekum BAE 1 Blowmoulding machine