Contact us to receive an offer.
| Manufacturer | Becker |
|---|---|
| Model | SV1100/1 |
| Year | |
| Location | Netherlands
|
| Category | Pumps and industrial pumping systems |
| Max Pressure | 270 bar |
| Engine Power | 13.2 kW |
| Weight | 73 kg |
| worked hours | 100 hours |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Datasheet | Becker SV1100/1 |
| Last availability date | 06/05/2026 |
| Product id | P250929107 |
| Language |
Индустриална помпа Becker SV1100/1
Průmyslové čerpadlo Becker SV1100/1
Becker SV1100/1 Industriel pumpe
Becker SV1100/1 Industriepumpe
Βιομηχανική αντλία Becker SV1100/1
Becker SV1100/1 Industrial pump
Bomba industrial Becker SV1100/1
Pompe industrielle Becker SV1100/1
Industrijska pumpa Becker SV1100/1
Becker SV1100/1 Ipari szivattyú
Pompa industriale Becker SV1100/1
Pramoninis siurblys Becker SV1100/1
Becker SV 1100/1 vacuümpomp / side-channel blower:
Pompa przemysłowa Becker SV1100/1
Bomba industrial Becker SV1100/1
Pompă industrială Becker SV1100/1
Becker SV1100/1 Промышленный насос
Industrijska pumpa Becker SV1100/1
Becker SV1100/1 Industriell pump
Endüstriyel pompa Becker SV1100/1
|
The Becker SV1100/1 is a single-stage side-channel (regenerative) vacuum pump designed for oil-free operation in the compression zone, which minimizes wear and reduces maintenance requirements. It operates with an engine power of 13.2 kW and can achieve a maximum pressure of 270 bar. The pump weighs approximately 73 kg.
This model is suitable for applications requiring moderate vacuum levels rather than deep vacuum, as its relative vacuum capability is limited. It is important to ensure proper cooling and airflow during operation to prevent overheating. Additionally, maintaining a clean inlet filter is critical to avoid performance degradation or potential damage caused by dirt and particles.
The pump features a compact design and is mounted horizontally on a blue wooden pallet, facilitating easy handling and installation. Visible components include a cylindrical air filter or silencer with a metal grille on the left side, a large electric motor equipped with cooling fins and connected via orange electrical cables, and a pump outlet pipe featuring a round metallic flange and a cylindrical housing with a latch for access.
The motor nameplate indicates a model number 132M/2L, with electrical specifications of 380/400 V and 60 Hz frequency. Compliance marks such as CE and EAC are present, confirming adherence to relevant standards. The equipment appears clean and in good physical condition, with no visible damage, although the motor nameplate shows slight scratches without affecting legibility.
This pump is designed to provide relatively quiet operation, aided by built-in dampers and optional accessories like integrated inlet and outlet silencers, external suction filters, and safety valves. Users should consider the flow rate variability depending on system load, as regenerative pumps are sensitive to pressure drops in the connected system.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical specifications (rough summary)
The SV 1100/1 is a single-stage side-channel / regenerative pump (i.e. contact-free, oil-free in the compression zone).
becker-international.com
+2
beckerpumpsales.com
+2
Power: ≈ 11 kW at 50 Hz.
becker-international.com
Flow rate (airflow): at 50 Hz about 1,050 m³/hour.
becker-international.com
+2
beckerpumps.com
+2
Vacuum (relative): approx. 290 mbar at 50 Hz (i.e. up to ~ 710 mbar vacuum)
becker-international.com
Noise level: approx. 75 dB(A) at 50 Hz.
beckerpumps.com
+1
Weight: ± 125 kg including motor (for standard design)
becker-international.com
+2
becker-international.com
+2
Connections: suction and pressure side G4 (standard)
beckerpumps.com
Accessories / options: integrated inlet and outlet silencers, external suction filter, external safety valve, etc.
Features & benefits / limitations.
Advantages:
Because it operates without contact in the compression section, there is less wear and tear and less maintenance on internal parts.
becker-international.com
+2
beckerpumpsales.com
+2
Oil-free in the compression section (so no oil mixture in the air stream).
beckerpumpsales.com
+2
beckerpumps.com
+2
Relatively quiet operation with built-in dampers.
beckerpumps.com
+2
becker-international.com
+2
Compact design, with rubber base or horizontal mounting possible.
becker-international.com
+1
Limitations / concerns:
The vacuum level (relative) is limited; it is not a deep vacuum pump, but suitable for applications where moderate vacuum is sufficient.
Cooling and airflow must be good so that the pump does not overheat.
Filter inlet is important - dirt and particles can reduce efficiency or cause damage.
Because it is a regenerative pump, the flow rate can depend greatly on the load (pressure drop in the system).
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | May 13, 2026 |
Technical specifications (rough summary)
The SV 1100/1 is a single-stage side-channel / regenerative pump (i.e. contact-free, oil-free in the compression zone).
becker-international.com
+2
beckerpumpsales.com
+2
Power: ≈ 11 kW at 50 Hz.
becker-international.com
Flow rate (airflow): at 50 Hz about 1,050 m³/hour.
becker-international.com
+2
beckerpumps.com
+2
Vacuum (relative): approx. 290 mbar at 50 Hz (i.e. up to ~ 710 mbar vacuum)
becker-international.com
Noise level: approx. 75 dB(A) at 50 Hz.
beckerpumps.com
+1
Weight: ± 125 kg including motor (for standard design)
becker-international.com
+2
becker-international.com
+2
Connections: suction and pressure side G4 (standard)
beckerpumps.com
Accessories / options: integrated inlet and outlet silencers, external suction filter, external safety valve, etc.
Features & benefits / limitations.
Advantages:
Because it operates without contact in the compression section, there is less wear and tear and less maintenance on internal parts.
becker-international.com
+2
beckerpumpsales.com
+2
Oil-free in the compression section (so no oil mixture in the air stream).
beckerpumpsales.com
+2
beckerpumps.com
+2
Relatively quiet operation with built-in dampers.
beckerpumps.com
+2
becker-international.com
+2
Compact design, with rubber base or horizontal mounting possible.
becker-international.com
+1
Limitations / concerns:
The vacuum level (relative) is limited; it is not a deep vacuum pump, but suitable for applications where moderate vacuum is sufficient.
Cooling and airflow must be good so that the pump does not overheat.
Filter inlet is important - dirt and particles can reduce efficiency or cause damage.
Because it is a regenerative pump, the flow rate can depend greatly on the load (pressure drop in the system).
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Pumps and industrial pumping systems |
| Max Pressure | 270 bar |
| Engine Power | 13.2 kW |
| Weight | 73 kg |
| worked hours | 100 hours |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Datasheet | Becker SV1100/1 |
| Last availability date | 06/05/2026 |
| Product id | P250929107 |
| Language |
Индустриална помпа Becker SV1100/1
Průmyslové čerpadlo Becker SV1100/1
Becker SV1100/1 Industriel pumpe
Becker SV1100/1 Industriepumpe
Βιομηχανική αντλία Becker SV1100/1
Becker SV1100/1 Industrial pump
Bomba industrial Becker SV1100/1
Pompe industrielle Becker SV1100/1
Industrijska pumpa Becker SV1100/1
Becker SV1100/1 Ipari szivattyú
Pompa industriale Becker SV1100/1
Pramoninis siurblys Becker SV1100/1
Becker SV 1100/1 vacuümpomp / side-channel blower:
Pompa przemysłowa Becker SV1100/1
Bomba industrial Becker SV1100/1
Pompă industrială Becker SV1100/1
Becker SV1100/1 Промышленный насос
Industrijska pumpa Becker SV1100/1
Becker SV1100/1 Industriell pump
Endüstriyel pompa Becker SV1100/1
|
The Becker SV1100/1 is a single-stage side-channel (regenerative) vacuum pump designed for oil-free operation in the compression zone, which minimizes wear and reduces maintenance requirements. It operates with an engine power of 13.2 kW and can achieve a maximum pressure of 270 bar. The pump weighs approximately 73 kg.
This model is suitable for applications requiring moderate vacuum levels rather than deep vacuum, as its relative vacuum capability is limited. It is important to ensure proper cooling and airflow during operation to prevent overheating. Additionally, maintaining a clean inlet filter is critical to avoid performance degradation or potential damage caused by dirt and particles.
The pump features a compact design and is mounted horizontally on a blue wooden pallet, facilitating easy handling and installation. Visible components include a cylindrical air filter or silencer with a metal grille on the left side, a large electric motor equipped with cooling fins and connected via orange electrical cables, and a pump outlet pipe featuring a round metallic flange and a cylindrical housing with a latch for access.
The motor nameplate indicates a model number 132M/2L, with electrical specifications of 380/400 V and 60 Hz frequency. Compliance marks such as CE and EAC are present, confirming adherence to relevant standards. The equipment appears clean and in good physical condition, with no visible damage, although the motor nameplate shows slight scratches without affecting legibility.
This pump is designed to provide relatively quiet operation, aided by built-in dampers and optional accessories like integrated inlet and outlet silencers, external suction filters, and safety valves. Users should consider the flow rate variability depending on system load, as regenerative pumps are sensitive to pressure drops in the connected system.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | May 13, 2026 |
Netherlands
1999
| Max Pressure | 0.8 bar |
|---|---|
| Flow rate | 250 m³/h |
| Engine Power | 5.5 kW |
|---|
Netherlands
1996
| Max Pressure | 0.8 bar |
|---|---|
| Flow rate | 250 m³/h |
| Engine Power | 5.5 kW |
|---|
United Kingdom
2021
| Max Pressure | 250 bar |
|---|---|
| Flow rate | 490 m³/h |
| Engine Power | 11 kW |
|---|
Estonia
2005
Slovenia
2000
Italy
2016
EN
- Languages
English (GB)