Price on request
Make an offer| Type | Pneumatic |
| Nbr of strokes/min | 80 |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | being refitted |
| Last availability date | 20/01/2026 |
This listing is for a Beché pneumatic forging hammer, model DG13, manufactured in 1985. The hammer operates at a maximum of 80 strokes per minute, delivering an effect of blow of 13,000 mkg with a total stroke of the tup measuring 1100 mm. It requires an air compressor output of 18 m³/min for cold air and 12 m³/min for air heated to 160 °C, with an air consumption of 2.25 m³ per blow at the heaviest blow. The volume of the air chamber is 16 m³. Additionally, the hammer uses saturated steam, consuming 1.15 kg per blow and 9.2 kg per minute overall. The distance between the guides is 800 mm, with a maximum guide length of 1600 mm. The minimum overall height of swages without edges is 400 mm, and the height above the floor is 4600 mm. The total weight of the machine, including steel plate standards, is approximately 65,000 kg.
The forging hammer is painted blue and yellow, featuring a hammer block with the BECHÉ logo clearly visible on the yellow section. The anvil base and hammer die are visible inside the hammer frame. The machine appears structurally intact, showing some wear and dirt consistent with typical industrial use. It is located indoors on a concrete floor alongside other machinery. Some images provided are blurry and overexposed, limiting detailed visual assessment. This pneumatic forging hammer is suitable for heavy industrial forging applications requiring consistent and powerful blows.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The steel forging hammer in the ad is for sale.
Effect of Blow (mkg) : 13000
Total Stroke of Tup : 1100 mm
Max Number of Blows :80 per minute
Air consumption per blow of sucked air at heaviest blow (cold air) : 2.25 m³
Required compressor output of sucked air perm in : 18 m³/min (cold air) and 12 m³/min (160 ° hot air)
Volume of air chamber : 16 m³
Steam consumption per blow at heaviest blaw (satured steam) : 1,15 Kg
Consumption steam perm in (saturated stem) : 9,2 Kg
Distance between guides : 800 mm
Max length of guides : 1600 mm
Min overall height of swages without edges : 400 mm
Height above floor : 4600 mm
Total weight with steel plate standards : 65.000 Kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2015 |
| Offers online | 2 |
| Last activity | Feb. 16, 2026 |
The steel forging hammer in the ad is for sale.
Effect of Blow (mkg) : 13000
Total Stroke of Tup : 1100 mm
Max Number of Blows :80 per minute
Air consumption per blow of sucked air at heaviest blow (cold air) : 2.25 m³
Required compressor output of sucked air perm in : 18 m³/min (cold air) and 12 m³/min (160 ° hot air)
Volume of air chamber : 16 m³
Steam consumption per blow at heaviest blaw (satured steam) : 1,15 Kg
Consumption steam perm in (saturated stem) : 9,2 Kg
Distance between guides : 800 mm
Max length of guides : 1600 mm
Min overall height of swages without edges : 400 mm
Height above floor : 4600 mm
Total weight with steel plate standards : 65.000 Kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | Pneumatic |
| Nbr of strokes/min | 80 |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | being refitted |
| Last availability date | 20/01/2026 |
This listing is for a Beché pneumatic forging hammer, model DG13, manufactured in 1985. The hammer operates at a maximum of 80 strokes per minute, delivering an effect of blow of 13,000 mkg with a total stroke of the tup measuring 1100 mm. It requires an air compressor output of 18 m³/min for cold air and 12 m³/min for air heated to 160 °C, with an air consumption of 2.25 m³ per blow at the heaviest blow. The volume of the air chamber is 16 m³. Additionally, the hammer uses saturated steam, consuming 1.15 kg per blow and 9.2 kg per minute overall. The distance between the guides is 800 mm, with a maximum guide length of 1600 mm. The minimum overall height of swages without edges is 400 mm, and the height above the floor is 4600 mm. The total weight of the machine, including steel plate standards, is approximately 65,000 kg.
The forging hammer is painted blue and yellow, featuring a hammer block with the BECHÉ logo clearly visible on the yellow section. The anvil base and hammer die are visible inside the hammer frame. The machine appears structurally intact, showing some wear and dirt consistent with typical industrial use. It is located indoors on a concrete floor alongside other machinery. Some images provided are blurry and overexposed, limiting detailed visual assessment. This pneumatic forging hammer is suitable for heavy industrial forging applications requiring consistent and powerful blows.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2015 |
| Offers online | 2 |
| Last activity | Feb. 16, 2026 |
Ковашки чук Beche DG13
Kovací buchar Beche DG13
Smedehammer Beche DG13
Beche DG13 Schmiedehämmer
Σφυρί σφυρηλάτησης Beche DG13
Beche DG13 Forging hammer
Martillo pilón Beche DG13
Marteau pilon Beche DG13
Čekić za kovanje Beche DG13
Beche DG13 Kovácsoló kalapács
Maglio Beche DG13
Kalimo plaktukas Beche DG13
Beche DG13 Smeedhamer
Używany młot kuźniczy Beche DG13
Martelo de forjamento Beche DG13
Ciocan de forjare Beche DG13
Beche DG13 Ковочный молот
Kovački čekić Beche DG13
Beche DG13 Smide hammare
Dövme çekici Beche DG13
EN
- Languages
English (GB)