Price on request
Make an offerContact us to receive an offer.
| Cutting length | 8060 mm |
| Max. thickness | 16 mm |
| Back gauge type | CNC Backgauge |
| ------------------- | |
| Length x width x height | 9260.0 × 3535.0 × 3320.0 |
| Weight | 66500 kg |
| worked hours | 3515 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 27/02/2026 |
For sale is a Baykal HNC 8116 hydraulic guillotine shear, manufactured in 2014. This robust machine features a cutting length of 8060 mm and can handle sheet metal up to 16 mm thick. It has a welded steel construction ensuring rigidity and durability for industrial use. The machine is equipped with a CYBELEC CNC control system that allows programming of bumper position, number of cuts, cutting angle, and blade gap. The back gauge is CNC controlled and motorized, driven by a ball screw with a tilt function to accommodate oversized sheets.
Operator safety is addressed with an orange safety guard along the cutting blade area and finger protection at the front. The machine includes front metal support arms extending approximately 1000 mm to aid in material handling during cutting, as well as side cut-outs in the frame measuring 350 mm. Additional features include automatic CNC adjustment of blade gap and cutting angle, hydraulic sheet pressure, hydraulic overload protection, and a portable foot switch for operation.
The machine's control panel is located on the left side and features a display screen with multiple buttons, including an emergency stop. The cutting line is illuminated to enhance visibility during operation. The machine offers three operating modes to suit different cutting requirements.
This Baykal shear weighs approximately 66,500 kg and measures 9260 mm in length, 3535 mm in width, and 3320 mm in height. The machine shows signs of use with some dirt and wear marks but appears well-maintained with no visible rust or damage. A ladder is attached to the right rear side for access, and the machine has two independent drawers for collecting cut material that move along tracks. A second set of upper and lower cutting knives is also included.
CE marking indicates compliance with European safety standards. Potential buyers are welcome to inspect the machine on site. For further information or questions, please feel free to contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
For sale we have a used Baykal HNC 8116 CNC hydraulic guillotine shears. The shears have a cutting length of 8060mm and the maximum thickness of sheet metal is 16mm
The machine was purchased new and has been working for us since 2014. During this period the machine was very little used, we mostly used it for cutting 3-8mm thick metal sheets. The counter state is 3515h
Here is some basic information
- Welded steel construction that provides the necessary rigidity and durability
- CYBELEC CNC control with programmable bumper, number of cuts, cutting angle, gap between blades;
- Motorized rear bumper driven by ball screw with tilt function to allow cutting oversized sheets
- Finger protection for the operator from the front of the machine
- Front supports 1000 mm long
- Side cut-out in the frame 350 mm
- Automatic CNC adjustment of blade gap and cutting angle
- High-carbon steel blades
- Adjustable cutting length
- Cutting line illumination
- 3 operating modes
- Hydraulic sheet pressure
- Portable foot switch
- Hydraulic overload protection
- CE marking
The milling machine has two independent drawers for the cut material, which move along the track. We also have a second set of upper and lower cutting knives.
The photos show the product sold and basic information from the nameplate.
The machine all the time in use we invite you to visit to inspect and test the machine.
If you have any questions feel free to contact me, I will try to provide information on all questions.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | Feb. 20, 2026 |
For sale we have a used Baykal HNC 8116 CNC hydraulic guillotine shears. The shears have a cutting length of 8060mm and the maximum thickness of sheet metal is 16mm
The machine was purchased new and has been working for us since 2014. During this period the machine was very little used, we mostly used it for cutting 3-8mm thick metal sheets. The counter state is 3515h
Here is some basic information
- Welded steel construction that provides the necessary rigidity and durability
- CYBELEC CNC control with programmable bumper, number of cuts, cutting angle, gap between blades;
- Motorized rear bumper driven by ball screw with tilt function to allow cutting oversized sheets
- Finger protection for the operator from the front of the machine
- Front supports 1000 mm long
- Side cut-out in the frame 350 mm
- Automatic CNC adjustment of blade gap and cutting angle
- High-carbon steel blades
- Adjustable cutting length
- Cutting line illumination
- 3 operating modes
- Hydraulic sheet pressure
- Portable foot switch
- Hydraulic overload protection
- CE marking
The milling machine has two independent drawers for the cut material, which move along the track. We also have a second set of upper and lower cutting knives.
The photos show the product sold and basic information from the nameplate.
The machine all the time in use we invite you to visit to inspect and test the machine.
If you have any questions feel free to contact me, I will try to provide information on all questions.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting length | 8060 mm |
| Max. thickness | 16 mm |
| Back gauge type | CNC Backgauge |
| ------------------- | |
| Length x width x height | 9260.0 × 3535.0 × 3320.0 |
| Weight | 66500 kg |
| worked hours | 3515 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 27/02/2026 |
For sale is a Baykal HNC 8116 hydraulic guillotine shear, manufactured in 2014. This robust machine features a cutting length of 8060 mm and can handle sheet metal up to 16 mm thick. It has a welded steel construction ensuring rigidity and durability for industrial use. The machine is equipped with a CYBELEC CNC control system that allows programming of bumper position, number of cuts, cutting angle, and blade gap. The back gauge is CNC controlled and motorized, driven by a ball screw with a tilt function to accommodate oversized sheets.
Operator safety is addressed with an orange safety guard along the cutting blade area and finger protection at the front. The machine includes front metal support arms extending approximately 1000 mm to aid in material handling during cutting, as well as side cut-outs in the frame measuring 350 mm. Additional features include automatic CNC adjustment of blade gap and cutting angle, hydraulic sheet pressure, hydraulic overload protection, and a portable foot switch for operation.
The machine's control panel is located on the left side and features a display screen with multiple buttons, including an emergency stop. The cutting line is illuminated to enhance visibility during operation. The machine offers three operating modes to suit different cutting requirements.
This Baykal shear weighs approximately 66,500 kg and measures 9260 mm in length, 3535 mm in width, and 3320 mm in height. The machine shows signs of use with some dirt and wear marks but appears well-maintained with no visible rust or damage. A ladder is attached to the right rear side for access, and the machine has two independent drawers for collecting cut material that move along tracks. A second set of upper and lower cutting knives is also included.
CE marking indicates compliance with European safety standards. Potential buyers are welcome to inspect the machine on site. For further information or questions, please feel free to contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | Feb. 20, 2026 |
Baykal HNC 8116
Hydraulické nůžky / gilotiny Baykal HNC 8116
Baykal HNC 8116
Baykal HNC 8116 Hydraulische Blechschere
Baykal HNC 8116
Baykal HNC 8116 hydraulic shear
Cizalla guillotina hidráulica Baykal HNC 8116
Cisaille guillotine hydraulique Baykal HNC 8116
Baykal HNC 8116
Baykal HNC 8116
Cesoia ghigliottina idraulica Baykal HNC 8116
Baykal HNC 8116
Baykal HNC 8116
Nożyce gilotynowe hydrauliczne Baykal HNC 8116
Baykal HNC 8116
Baykal HNC 8116
Baykal HNC 8116 Гидравлические гильотинные ножницы
Baykal HNC 8116
Baykal HNC 8116
Hidrolik giyotin makas Baykal HNC 8116
EN
- Languages
English (GB)