| Manufacturer | Bauermeister |
|---|---|
| Model | UT42 |
| Year | |
| Location | France
|
| Category | Mills |
| Engine Power | 37 kW |
| Length x width x height | 1350.0 × 2860.0 × 2400.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 31/10/2026 |
| Product id | P261022344 |
| Language |
Мелница Bauermeister UT42
Mlýnek Bauermeister UT42
Bauermeister UT42 Mølle
Bauermeister UT42 Quetsche
Μύλος Bauermeister UT42
Bauermeister UT42 – Hammer mill
Triturador Bauermeister UT42
Bauermeister UT42 - Broyeur à marteaux
Mlin Bauermeister UT42
Bauermeister UT42 Malom
Mulino Bauermeister UT42
Bauermeister UT42 Malūnas
Bauermeister UT42 Molen
Młynek Bauermeister UT42
Moinho Bauermeister UT42
moara Bauermeister UT42
Bauermeister UT42 Дробильное оборудование
Mill Bauermeister UT42
Bauermeister UT42 Kvarn
Mengene Bauermeister UT42
|
Bauermeister UT42 hammer mill for impact grinding. The grinding fineness is controlled by the screen and rotor speed. The current specification gives a rotor diameter of 775 mm and a chamber diameter of 800 mm. Motor power is 37 kW.
The mill has a cast-alloy frame. Parts that contact the product are described as a combination of stainless steel and non-stainless steel alloys. The listed screen grids include 1 mm (one), 3 mm (one), 5 mm (two) and 9 mm (two). The description states that 12 grids are available in six sizes, while these entries specify the sizes and quantities listed here.
The machine is mounted on a raised steel frame and has an electric motor with a yellow protective drive guard. Its housing has a circular access cover, locking bar and latch hardware, with an upper feed opening. With the access open, the rotor and surrounding bars or teeth and perforated screen elements can be seen. Several curved perforated screen sections are shown stacked on a pallet.
Visible exterior surfaces show scratches, scuffs, staining and areas of worn or chipped finish. The exposed chamber also shows residue, discoloration and wear. These observations describe visible condition only and do not indicate operating status.
Overall dimensions (L × W × H): 1350 × 2860 × 2400 mm. Bearings are stated to have been replaced by the seller’s team. An operating video is available on request.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Fabricant : Bauermeister
Modèle : UT42
Type : Hammer mill
Rotor diameter: 775 mm
Chamber diameter: 800 mm
Impact grinding, with fineness controlled by the screen and rotor speed
Materials:
- Cast alloy frame.
- Parts in contact with the product: a combination of stainless steel and non-stainless steel alloys
12 grids available in 6 sizes: from 1 to 9 mm:
- 1 mm x 1
- 3 mm x 1
- 5 mm x 2
- 9 mm x 2
Motor power: 37 kW
Dimension : 135 x 286 x 240 cm
Operating video available on request
Bearings: new (replaced by our teams)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 275 |
| Last activity | Oct. 31, 2026 |
Founded in 1994 and restructured in 2019, Osertech is a French company specialising in the purchase and sale of second‑hand industrial machinery, particularly in the process and packaging sectors. Based in Janville (5 Rue Pierre et Marie Curie, 28310 France) in the heart of the Cosmetic Valley and the Pôle Pharma region, the company has established a strong international presence via a wide network of partners and clients.
Osertech serves industries such as pharmaceuticals, cosmetics, chemicals and food production. Their inventory features machines and equipment covering processes like drying, mixing, conveying and packaging—including autoclaves, mixers, dryers, labelling machines and production lines.
What sets them apart is their commitment to quality and sustainability: each machine is inspected and tested in‑house before sale, and the company emphasises re‑use of industrial equipment as part of a circular economy approach.
In short: Osertech offers companies a flexible, cost‑effective way to access high‑quality equipment without the lead‑time and cost of new machines—all while supporting environmentally responsible practices.
Fabricant : Bauermeister
Modèle : UT42
Type : Hammer mill
Rotor diameter: 775 mm
Chamber diameter: 800 mm
Impact grinding, with fineness controlled by the screen and rotor speed
Materials:
- Cast alloy frame.
- Parts in contact with the product: a combination of stainless steel and non-stainless steel alloys
12 grids available in 6 sizes: from 1 to 9 mm:
- 1 mm x 1
- 3 mm x 1
- 5 mm x 2
- 9 mm x 2
Motor power: 37 kW
Dimension : 135 x 286 x 240 cm
Operating video available on request
Bearings: new (replaced by our teams)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Mills |
| Engine Power | 37 kW |
| Length x width x height | 1350.0 × 2860.0 × 2400.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 31/10/2026 |
| Product id | P261022344 |
| Language |
Мелница Bauermeister UT42
Mlýnek Bauermeister UT42
Bauermeister UT42 Mølle
Bauermeister UT42 Quetsche
Μύλος Bauermeister UT42
Bauermeister UT42 – Hammer mill
Triturador Bauermeister UT42
Bauermeister UT42 - Broyeur à marteaux
Mlin Bauermeister UT42
Bauermeister UT42 Malom
Mulino Bauermeister UT42
Bauermeister UT42 Malūnas
Bauermeister UT42 Molen
Młynek Bauermeister UT42
Moinho Bauermeister UT42
moara Bauermeister UT42
Bauermeister UT42 Дробильное оборудование
Mill Bauermeister UT42
Bauermeister UT42 Kvarn
Mengene Bauermeister UT42
|
Bauermeister UT42 hammer mill for impact grinding. The grinding fineness is controlled by the screen and rotor speed. The current specification gives a rotor diameter of 775 mm and a chamber diameter of 800 mm. Motor power is 37 kW.
The mill has a cast-alloy frame. Parts that contact the product are described as a combination of stainless steel and non-stainless steel alloys. The listed screen grids include 1 mm (one), 3 mm (one), 5 mm (two) and 9 mm (two). The description states that 12 grids are available in six sizes, while these entries specify the sizes and quantities listed here.
The machine is mounted on a raised steel frame and has an electric motor with a yellow protective drive guard. Its housing has a circular access cover, locking bar and latch hardware, with an upper feed opening. With the access open, the rotor and surrounding bars or teeth and perforated screen elements can be seen. Several curved perforated screen sections are shown stacked on a pallet.
Visible exterior surfaces show scratches, scuffs, staining and areas of worn or chipped finish. The exposed chamber also shows residue, discoloration and wear. These observations describe visible condition only and do not indicate operating status.
Overall dimensions (L × W × H): 1350 × 2860 × 2400 mm. Bearings are stated to have been replaced by the seller’s team. An operating video is available on request.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 275 |
| Last activity | Oct. 31, 2026 |
Founded in 1994 and restructured in 2019, Osertech is a French company specialising in the purchase and sale of second‑hand industrial machinery, particularly in the process and packaging sectors. Based in Janville (5 Rue Pierre et Marie Curie, 28310 France) in the heart of the Cosmetic Valley and the Pôle Pharma region, the company has established a strong international presence via a wide network of partners and clients.
Osertech serves industries such as pharmaceuticals, cosmetics, chemicals and food production. Their inventory features machines and equipment covering processes like drying, mixing, conveying and packaging—including autoclaves, mixers, dryers, labelling machines and production lines.
What sets them apart is their commitment to quality and sustainability: each machine is inspected and tested in‑house before sale, and the company emphasises re‑use of industrial equipment as part of a circular economy approach.
In short: Osertech offers companies a flexible, cost‑effective way to access high‑quality equipment without the lead‑time and cost of new machines—all while supporting environmentally responsible practices.
EN
- Languages
English (GB)