Contact us to receive an offer.
| Manufacturer | AXA |
|---|---|
| Model | VHC 2 M |
| Year | 2019 |
| Location | Germany
|
AXA VHC 2 M horizontal machining center. Manufacturer: AXA. Model: VHC 2 M. Year of manufacture: 2019 (known field). Note: the earlier listing text also lists 1999 as a manufacture year; please verify the correct year with the seller before purchase.
Key specifications (as provided):
- Axis travels: X = 2360 mm, Y = 600 mm, Z = 800 mm.
- Tool changer: 36 pockets.
- Spindle design: SK40.
- Control unit: Heidenhain TNC 430 M.
- Operating hours: 22,293 h (as listed).
- Spindle renewal indicated in 2022 (as listed).
Included components, accessories and on-site items (as reported/observed):
- Blue sliding enclosure front doors with three vertical oval windows.
- Operator control console mounted to the left side with monitor and keyboard.
- White side enclosure panel featuring a yellow "AXA" logo.
- Tooling/fixture cart and tooling holders positioned in front-right of the machine.
- Stacks of machined metal plates and wooden crates/pallets staged near the machine.
- Curved chip conveyor / discharge chute at the right rear of the machine.
- Internal vertical column with sliding guideways and multiple cable drag-chains.
- Red hydraulic/pneumatic unit with pressure gauge mounted near the column.
- Workholding/clamping fixtures installed on the bed; the bed has long linear guideways and two visible lead screws.
Condition notes (reported/observed):
- Lower front enclosure and machine base show dirt, stains and minor grime.
- Column and adjacent panels show staining and wear marks consistent with coolant/chips exposure.
- Chip accumulation and coolant residue present in the bed and along the guideways.
Documentation and photos are indicated as available, and the listing states the machine is available immediately. Please verify the manufacture year discrepancy, confirm the spindle renewal details, request a functional test or inspection as needed, and confirm which accessories are included before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Year of manufacture: 1999
Spindle design: SK40
Tool changer for 36 holders
Control unit: Heidenhain TNC 430 M
Travel paths:
X = 2,360 mm
Y = 600 mm
Z= 800mm
Operating hours: 22,293h
documentation
Photos attached
Available immediately
The spindle was renewed in 2022.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Aug. 3, 2026 |
Year of manufacture: 1999
Spindle design: SK40
Tool changer for 36 holders
Control unit: Heidenhain TNC 430 M
Travel paths:
X = 2,360 mm
Y = 600 mm
Z= 800mm
Operating hours: 22,293h
documentation
Photos attached
Available immediately
The spindle was renewed in 2022.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
AXA VHC 2 M horizontal machining center. Manufacturer: AXA. Model: VHC 2 M. Year of manufacture: 2019 (known field). Note: the earlier listing text also lists 1999 as a manufacture year; please verify the correct year with the seller before purchase.
Key specifications (as provided):
- Axis travels: X = 2360 mm, Y = 600 mm, Z = 800 mm.
- Tool changer: 36 pockets.
- Spindle design: SK40.
- Control unit: Heidenhain TNC 430 M.
- Operating hours: 22,293 h (as listed).
- Spindle renewal indicated in 2022 (as listed).
Included components, accessories and on-site items (as reported/observed):
- Blue sliding enclosure front doors with three vertical oval windows.
- Operator control console mounted to the left side with monitor and keyboard.
- White side enclosure panel featuring a yellow "AXA" logo.
- Tooling/fixture cart and tooling holders positioned in front-right of the machine.
- Stacks of machined metal plates and wooden crates/pallets staged near the machine.
- Curved chip conveyor / discharge chute at the right rear of the machine.
- Internal vertical column with sliding guideways and multiple cable drag-chains.
- Red hydraulic/pneumatic unit with pressure gauge mounted near the column.
- Workholding/clamping fixtures installed on the bed; the bed has long linear guideways and two visible lead screws.
Condition notes (reported/observed):
- Lower front enclosure and machine base show dirt, stains and minor grime.
- Column and adjacent panels show staining and wear marks consistent with coolant/chips exposure.
- Chip accumulation and coolant residue present in the bed and along the guideways.
Documentation and photos are indicated as available, and the listing states the machine is available immediately. Please verify the manufacture year discrepancy, confirm the spindle renewal details, request a functional test or inspection as needed, and confirm which accessories are included before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Aug. 3, 2026 |
Хоризонтален обработващ център AXA VHC 2 M
Horizontální obráběcí centrum AXA VHC 2 M
AXA VHC 2 M Vandret bearbejdningscenter
AXA VHC 2 M Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας AXA VHC 2 M
AXA VHC 2 M Horizontal machining center
Centro de mecanizado horizontal AXA VHC 2 M
Centre d'usinage horizontal AXA VHC 2 M
Horizontalni obradni centar AXA VHC 2 M
AXA VHC 2 M Vízszintes megmunkáló központ
Centro di lavoro orizzontale AXA VHC 2 M
AXA VHC 2 M Horizontalus apdirbimo centras
AXA VHC 2 M Horizontaal bewerkingscentrum
Centrum obróbcze poziome AXA VHC 2 M
Centro de usinagem horizontal AXA VHC 2 M
Centru de prelucrare orizontal AXA VHC 2 M
AXA VHC 2 M Горизонтальный обрабатывающий центр
Horizontalni obradni centar AXA VHC 2 M
AXA VHC 2 M Horisontellt bearbetningscenter
Yatay işleme merkezi AXA VHC 2 M
EN
- Languages
English (GB)