Contact us to receive an offer.
| Manufacturer | ASTEC |
|---|---|
| Model | CDH-3 A |
| Year | |
| Location | Switzerland
|
This listing features an ASTEC CDH-3 A vertical EDM die sinking machine designed for precise electrical discharge machining tasks. The machine operates with three axes, offering a longitudinal traverse (X-axis) of 300 mm, a cross traverse (Y-axis) of 200 mm, and a height adjustment (Z-axis) of 200 mm, allowing for versatile machining capabilities. The worktable measures 500 mm in length and 360 mm in width, supporting a maximum load of 300 kg. The working vessel inside has dimensions of 820 mm in length and 550 mm in width, suitable for accommodating various workpieces.
The machine supports electrode diameters ranging from 0.2 to 3.0 mm and utilizes a dielectric aggregate capacity of 20 liters, which is essential for the EDM process. It requires a total power input of 4.5 kVA and features a generator power of 40 A. The overall dimensions of the machine are 1200 mm in length, 1600 mm in width, and 2000 mm in height, with an approximate weight of 900 kg.
A control panel labeled CDH-3A is integrated into the machine, including an emergency stop button for operational safety. The worktable is equipped with a handwheel for manual adjustments, enhancing control during setup. Additionally, a red container, likely for coolant or fuel, is placed on a side shelf, indicating accessory provisions for machine operation. The machine appears clean and well-maintained with no visible signs of rust or damage.
Please note that this machine is offered as-is, where-is, and no additional information regarding its operational status or testing is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: ASTEC
Model: CDH-3 A
Number of Axis: 3
Table Length: 500 mm
Table Width: 360 mm
Maximum Table Load: 300 kg
Longitudinal Traverse (X-axis): 300 mm
Cross Traverse (Y-axis): 200 mm
Height Adjustment (Z-axis): 200 mm
Maximum Distance from Table to Sleeve: 220 mm
Working Vessel Length Inside: 820 mm
Working Vessel Width: 550 mm
Electrode Diameter: 0.2 - 3.0 mm
Dielectric Aggregate Capacity: 20 l
Generator Power: 40 A
Total Power Required: 4.5 kVA
Machine Weight: Approximately 900 kg
Overall Dimensions:
- Length: 1200 mm
- Width: 1600 mm
- Height: 2000 mm
Technical Condition: As-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 259 |
| Last activity | Nov. 7, 2026 |
Manufacturer: ASTEC
Model: CDH-3 A
Number of Axis: 3
Table Length: 500 mm
Table Width: 360 mm
Maximum Table Load: 300 kg
Longitudinal Traverse (X-axis): 300 mm
Cross Traverse (Y-axis): 200 mm
Height Adjustment (Z-axis): 200 mm
Maximum Distance from Table to Sleeve: 220 mm
Working Vessel Length Inside: 820 mm
Working Vessel Width: 550 mm
Electrode Diameter: 0.2 - 3.0 mm
Dielectric Aggregate Capacity: 20 l
Generator Power: 40 A
Total Power Required: 4.5 kVA
Machine Weight: Approximately 900 kg
Overall Dimensions:
- Length: 1200 mm
- Width: 1600 mm
- Height: 2000 mm
Technical Condition: As-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features an ASTEC CDH-3 A vertical EDM die sinking machine designed for precise electrical discharge machining tasks. The machine operates with three axes, offering a longitudinal traverse (X-axis) of 300 mm, a cross traverse (Y-axis) of 200 mm, and a height adjustment (Z-axis) of 200 mm, allowing for versatile machining capabilities. The worktable measures 500 mm in length and 360 mm in width, supporting a maximum load of 300 kg. The working vessel inside has dimensions of 820 mm in length and 550 mm in width, suitable for accommodating various workpieces.
The machine supports electrode diameters ranging from 0.2 to 3.0 mm and utilizes a dielectric aggregate capacity of 20 liters, which is essential for the EDM process. It requires a total power input of 4.5 kVA and features a generator power of 40 A. The overall dimensions of the machine are 1200 mm in length, 1600 mm in width, and 2000 mm in height, with an approximate weight of 900 kg.
A control panel labeled CDH-3A is integrated into the machine, including an emergency stop button for operational safety. The worktable is equipped with a handwheel for manual adjustments, enhancing control during setup. Additionally, a red container, likely for coolant or fuel, is placed on a side shelf, indicating accessory provisions for machine operation. The machine appears clean and well-maintained with no visible signs of rust or damage.
Please note that this machine is offered as-is, where-is, and no additional information regarding its operational status or testing is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 259 |
| Last activity | Nov. 7, 2026 |
Щампова потъваща EDM машина ASTEC CDH-3 A
Elektroerozivní hloubička ASTEC CDH-3 A
ASTEC CDH-3 A Die synkende edm maskine
ASTEC CDH-3 A Senkerodiermaschine
Die sinking edm μηχάνημα ASTEC CDH-3 A
ASTEC CDH-3 A Die sinking edm machine
Máquina de electroerosión por penetración ASTEC CDH-3 A
Machine d'électro-érosion par enfonçage ASTEC CDH-3 A
EDM stroj za tonjenje ASTEC CDH-3 A
ASTEC CDH-3 A Süllyedő edm gép
Elettroerosione a tuffo ASTEC CDH-3 A
Diegimo EDM mašina ASTEC CDH-3 A
ASTEC CDH-3 A Zinkende zinkvonkmachine
Elektrodrążarka wgłębna ASTEC CDH-3 A
Máquina edm afundando ASTEC CDH-3 A
Mașină de electroerosionare cu scufundare a matriței ASTEC CDH-3 A
ASTEC CDH-3 A Копировально-прошивочный станок
Die tone edm mašina ASTEC CDH-3 A
ASTEC CDH-3 A Sjunkande edm-maskin
Dalma erozyon makinesi ASTEC CDH-3 A
EN
- Languages
English (GB)