Contact us to receive an offer.
| Manufacturer | ARSILAC |
|---|---|
| Model | Fermé |
| Year | 2020 |
| Location | France
|
This ARSILAC Fermé vertical cylindrical tank, manufactured in 2020, is designed for industrial applications requiring robust and precise temperature control. The tank features an off-center conical dome and a 38% slope conical bottom, both finished with glazed 2B stainless steel on the interior and exterior surfaces, ensuring durability and ease of cleaning. Constructed from stainless steel 316L, it includes an anti-retention top flap and a double-acting horn-mounted valve (ELICA 1000 HL), providing reliable operation and control.
The tank is equipped with multiple connections: three single male DIN 80 connections on the dome, two single male DIN 65 ferrule connections, and a total drain pipe with a male end DIN 65, facilitating versatile integration into existing systems. It also includes an earth connection for safety and five lifting rings, including one at the tank foot, to assist with handling and installation.
Thermal regulation is achieved through five thermal regulation rings with water in/out sleeves and five heating rings, each covering 4.75 m², resulting in a total temperature control surface area of 9.5 m². The maximum pressure on the serpentine belt is rated at 2.5 bar. The tank's temperature control ratio is 6.31 m² per 100 hectoliters.
Additional features include a truncated-cone connection with stainless steel faceplate for agitator mounting, a full stainless steel plug with EPDM gasket for agitator port closure, and four external tank feet with a height of 800 mm, each equipped with leveling jacks and 304L stainless steel floor plates for stable installation. The tank also has a flat stainless steel reinforcement belt measuring 150 x 5 mm.
Dimensions are 2507 mm in diameter and 4550 mm in height, with a weight of approximately 1200 kg and a capacity of 15,100 liters. The tank is presented in clean condition, with visible horizontal reinforcing bands, multiple nozzles near the bottom, and a vent pipe on top. It stands on conical legs and is suitable for industrial manufacturing settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TECHNICAL SPECIFICATIONS
- Vertical cylindrical on feet
- Off-center conical dome
- 38% slope conical bottom
- Interior and exterior finish: glazed 2B
- Off-center chimney Ø 400 mm and height 300 mm
- 316L ELICA stainless steel anti-retention top flap
- 3 single male DIN 80 connections on the dome
- Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve
- 5 lifting rings, including 1 at tank foot
- Bracket + nameplate
- 1 single male DIN 65 ferrule connection
- 1 single male DIN 65 ferrule connection
- Earth connection
- 5 thermal regulation rings with water I/O sleeve: 4.75 m2
- 5 heating rings with water I/O connection: 4.75 m2
- Maximum pressure on serpentine belt: 2.5 bar
- Total temperature control surface area: 9.5 m2
- Temperature control ratio per 100 HL: 6.31 m2
- Truncated-cone connection + stainless steel faceplate for agitator mounting
- Full stainless steel plug + EPDM gasket for agitator port closure
- Total drain pipe + male end DIN 65
- 4 external tank feet, height 800 mm
- Flat stainless steel reinforcement belt 150 x 5
- 4 leveling jacks
- 4 304L stainless steel floor plates
DIMENSIONS
- Diameter: 2507 mm
- Height : 4550 mm
- Weight : 1200 Kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many cubic meters is this equipment's tank?
This equipment has a 15 m3 tank.
What role does this buffer tank serve in the beverage line?
This buffer tank is intended for temporary storage of carbonated beverages under pressure between a carbomixer and a bottle-filling machine.
What capacity is specified for the machine?
This buffer tank is specified with a preferred capacity of approximately 3,000 liters, with capacities from 2,000 to 3,500 liters also acceptable.
What is the maximum diameter of this buffer tank?
This buffer tank must have a maximum diameter of 1,700 mm.
What minimum working pressure is required for the machine?
This buffer tank is required to have a minimum working pressure of 3 bar.
Which stainless steel grades are considered for this buffer tank?
This buffer tank is being considered in either 316L or 304L stainless steel.
What product inlet configurations are specified for the machine?
This buffer tank is requested with a product inlet configured either tangentially or through the top with a dip pipe.
What outlet and drainage features are requested for this buffer tank?
This buffer tank is requested with a low outlet to the filling machine, with complete drainage desired if feasible.
Does the machine have a CO₂ inlet for maintaining pressure?
This buffer tank is requested with a CO₂ inlet to maintain pressure.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 137 |
| Last activity | Nov. 6, 2026 |
TECHNICAL SPECIFICATIONS
- Vertical cylindrical on feet
- Off-center conical dome
- 38% slope conical bottom
- Interior and exterior finish: glazed 2B
- Off-center chimney Ø 400 mm and height 300 mm
- 316L ELICA stainless steel anti-retention top flap
- 3 single male DIN 80 connections on the dome
- Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve
- 5 lifting rings, including 1 at tank foot
- Bracket + nameplate
- 1 single male DIN 65 ferrule connection
- 1 single male DIN 65 ferrule connection
- Earth connection
- 5 thermal regulation rings with water I/O sleeve: 4.75 m2
- 5 heating rings with water I/O connection: 4.75 m2
- Maximum pressure on serpentine belt: 2.5 bar
- Total temperature control surface area: 9.5 m2
- Temperature control ratio per 100 HL: 6.31 m2
- Truncated-cone connection + stainless steel faceplate for agitator mounting
- Full stainless steel plug + EPDM gasket for agitator port closure
- Total drain pipe + male end DIN 65
- 4 external tank feet, height 800 mm
- Flat stainless steel reinforcement belt 150 x 5
- 4 leveling jacks
- 4 304L stainless steel floor plates
DIMENSIONS
- Diameter: 2507 mm
- Height : 4550 mm
- Weight : 1200 Kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many cubic meters is this equipment's tank?
This equipment has a 15 m3 tank.
What role does this buffer tank serve in the beverage line?
This buffer tank is intended for temporary storage of carbonated beverages under pressure between a carbomixer and a bottle-filling machine.
What capacity is specified for the machine?
This buffer tank is specified with a preferred capacity of approximately 3,000 liters, with capacities from 2,000 to 3,500 liters also acceptable.
What is the maximum diameter of this buffer tank?
This buffer tank must have a maximum diameter of 1,700 mm.
What minimum working pressure is required for the machine?
This buffer tank is required to have a minimum working pressure of 3 bar.
Which stainless steel grades are considered for this buffer tank?
This buffer tank is being considered in either 316L or 304L stainless steel.
What product inlet configurations are specified for the machine?
This buffer tank is requested with a product inlet configured either tangentially or through the top with a dip pipe.
What outlet and drainage features are requested for this buffer tank?
This buffer tank is requested with a low outlet to the filling machine, with complete drainage desired if feasible.
Does the machine have a CO₂ inlet for maintaining pressure?
This buffer tank is requested with a CO₂ inlet to maintain pressure.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This ARSILAC Fermé vertical cylindrical tank, manufactured in 2020, is designed for industrial applications requiring robust and precise temperature control. The tank features an off-center conical dome and a 38% slope conical bottom, both finished with glazed 2B stainless steel on the interior and exterior surfaces, ensuring durability and ease of cleaning. Constructed from stainless steel 316L, it includes an anti-retention top flap and a double-acting horn-mounted valve (ELICA 1000 HL), providing reliable operation and control.
The tank is equipped with multiple connections: three single male DIN 80 connections on the dome, two single male DIN 65 ferrule connections, and a total drain pipe with a male end DIN 65, facilitating versatile integration into existing systems. It also includes an earth connection for safety and five lifting rings, including one at the tank foot, to assist with handling and installation.
Thermal regulation is achieved through five thermal regulation rings with water in/out sleeves and five heating rings, each covering 4.75 m², resulting in a total temperature control surface area of 9.5 m². The maximum pressure on the serpentine belt is rated at 2.5 bar. The tank's temperature control ratio is 6.31 m² per 100 hectoliters.
Additional features include a truncated-cone connection with stainless steel faceplate for agitator mounting, a full stainless steel plug with EPDM gasket for agitator port closure, and four external tank feet with a height of 800 mm, each equipped with leveling jacks and 304L stainless steel floor plates for stable installation. The tank also has a flat stainless steel reinforcement belt measuring 150 x 5 mm.
Dimensions are 2507 mm in diameter and 4550 mm in height, with a weight of approximately 1200 kg and a capacity of 15,100 liters. The tank is presented in clean condition, with visible horizontal reinforcing bands, multiple nozzles near the bottom, and a vent pipe on top. It stands on conical legs and is suitable for industrial manufacturing settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 137 |
| Last activity | Nov. 6, 2026 |
Looking for a used stainless steel tank?
Stainless steel tanks store, mix, heat, cool, and process liquids, pastes, powders, and semi-solids across the pharmaceutical, chemical, food, beverage, and cosmetics industries. The category covers the full range of process vessels — from simple storage tanks and mobile containers (IBCs, bins, drums) through jacketed mixing vessels with agitators to pressure-rated reactors designed for vacuum or elevated-pressure operation. Equipment ranges from small mobile bins of 30–200 litres weighing under 100 kg to large-capacity process tanks of 10,000–50,000+ litres weighing several tonnes.
On Exapro, you can browse used stainless steel tanks from sellers worldwide. Filter by capacity, stainless steel grade (304 or 316L), jacket type, agitator, maximum pressure, and maximum temperature to find the vessel that matches your process requirements. Each listing includes specifications, photos, and direct contact with the seller.
Browse all used stainless steel tanks available on Exapro today.
Резервоар от неръждаема стомана 316L - Контрол на температурата - 15100 L
Nádrž z nerezové oceli 316L - s regulací teploty - 15100 l
316L rustfri ståltank - Temperaturkontrolleret - 15100 L
Edelstahltank 316L - temperaturgesteuert - 15100 L
Δεξαμενή από ανοξείδωτο χάλυβα 316L - Ελεγχόμενη θερμοκρασία - 15100 L
316L stainless steel tank - Temperature-controlled - 15100 L
Depósito de acero inoxidable 316L - Temperatura controlada - 15100 L
Cuve inox 316L - Thermorégulée - 15100 L
Spremnik od nehrđajućeg čelika 316L - Termoreguliran - 15100 L
316L rozsdamentes acél tartály - Hőmérséklet-szabályozott - 15100 L
Serbatoio in acciaio inox 316L - Temperatura controllata - 15100 L
316L nerūdijančiojo plieno talpykla - 15100 L - kontroliuojama temperatūra
316L roestvrijstalen tank - Temperatuurgeregeld - 15100 L
Zbiornik ze stali nierdzewnej 316L - Kontrolowana temperatura - 15100 L
Tanque em aço inoxidável 316L - Temperatura controlada - 15100 L
Rezervor din oțel inoxidabil 316L - temperatură controlată - 15100 L
Бак из нержавеющей стали 316L - с контролем температуры - 15100 л
Rezervoar od nerđajućeg čelika 316L - termoregulisan - 15100 L
Tank i rostfritt stål 316L - Temperaturkontrollerad - 15100 L
316L paslanmaz çelik tank - Sıcaklık kontrollü - 15100 L
EN
- Languages
English (GB)