Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | ALLROUNDER SELECTA 630 S 2500-2100 |
| Year | 2002 |
| Location | Romania
|
Manufacturer: Arburg — ALLROUNDER SELECTA 630 S 2500-2100. Machine type: hydraulic injection moulding machine. Year of manufacture: February 2002. Technical condition: listed as Good. Current state: visible but unplugged.
Key technical data (as provided): clamping force 2,500 kN (250 tonnes). Opening force 725 kN. Maximum opening stroke 600 mm. Mould height range 300–700 mm (configuration dependent). Maximum daylight between platens 1,300 mm. Tie bar spacing (H × V) 630 × 630 mm. Platen size 900 × 900 mm. Maximum moving platen load 2,500 kg. Ejector force 90 kN with 225 mm ejector stroke.
Screw and injection data (provided options): screw diameter options 60 mm, 70 mm and 80 mm. Shot volumes: 792 cm³ (60 mm), 1,078 cm³ (70 mm), 1,407 cm³ (80 mm). Shot weights (PS): 723 g (60 mm), 984 g (70 mm), 1,286 g (80 mm). Maximum injection pressures: 2,500 bar (60 mm), 2,000 bar (70 mm), 1,530 bar (80 mm). Maximum injection rates: 1,132 cm³/s (60 mm), 1,540 cm³/s (70 mm), 2,012 cm³/s (80 mm). Plasticizing capacity listed as 125 kg/h for 60 mm screw and 175 kg/h for 80 mm screw. Polyamide (PA 6.6) capacity given approximately 62–88 kg/h depending on screw diameter.
Visible components and condition notes: four large tie bars and the fixed and moving platens are present, with platen faces showing multiple through-holes for mold mounting and tie bar clamps on the moving platen. Some surface wear/discoloration is visible on tie bars. An operator control console and control panel with multiple key sections and a prominent red emergency stop are fitted; the machine column adjacent to the control panel is green. A light/stack tower with red and amber segments and a red warning indicator are mounted on the machine column. A yellow safety guard/door with a window and black handle is fitted at the left side. A bundle of cables or a harness is draped over the tie bars; cables and hoses also appear routed along the machine base (this observation is less certain). A red plastic crate appears stored in an open compartment under the machine (observation less certain).
Please verify all specifications and inspect the machine in person or request additional documentation, test reports or photos before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: ARBURG GmbH + Co. KG
Series: ALLROUNDER SELECTA
Model: 630 S 2500-2100
Machine Type: Hydraulic Injection Moulding Machine
Year of Manufacture: February 2002
Weight: 14,500 kg
Technical Condition: Good
State: Visible but unplugged
Clamping Force: 2,500 kN (250 tonnes)
Opening Force: 725 kN
Maximum Opening Stroke: 600 mm
Mould Height Range: 300–700 mm (depending on configuration)
Maximum Daylight Between Platens: 1,300 mm
Tie Bar Spacing (H × V): 630 × 630 mm
Platen Size: 900 × 900 mm
Maximum Moving Platen Load: 2,500 kg
Ejector Force: 90 kN
Ejector Stroke: 225 mm
Screw Diameter Options: 60 mm, 70 mm, 80 mm
Shot Volume: 792 cm³ (60 mm), 1,078 cm³ (70 mm), 1,407 cm³ (80 mm)
Shot Weight (PS): 723 g (60 mm), 984 g (70 mm), 1,286 g (80 mm)
Maximum Injection Pressure: 2,500 bar (60 mm), 2,000 bar (70 mm), 1,530 bar (80 mm)
Maximum Injection Rate: 1,132 cm³/s (60 mm), 1,540 cm³/s (70 mm), 2,012 cm³/s (80 mm)
Plasticizing Capacity: 60 mm screw: 125 kg/h; 80 mm screw: 175 kg/h
Polyamide (PA 6.6) Capacity: Approximately 62–88 kg/h, depending on screw diameter
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 4 |
| Last activity | Oct. 23, 2026 |
Manufacturer: ARBURG GmbH + Co. KG
Series: ALLROUNDER SELECTA
Model: 630 S 2500-2100
Machine Type: Hydraulic Injection Moulding Machine
Year of Manufacture: February 2002
Weight: 14,500 kg
Technical Condition: Good
State: Visible but unplugged
Clamping Force: 2,500 kN (250 tonnes)
Opening Force: 725 kN
Maximum Opening Stroke: 600 mm
Mould Height Range: 300–700 mm (depending on configuration)
Maximum Daylight Between Platens: 1,300 mm
Tie Bar Spacing (H × V): 630 × 630 mm
Platen Size: 900 × 900 mm
Maximum Moving Platen Load: 2,500 kg
Ejector Force: 90 kN
Ejector Stroke: 225 mm
Screw Diameter Options: 60 mm, 70 mm, 80 mm
Shot Volume: 792 cm³ (60 mm), 1,078 cm³ (70 mm), 1,407 cm³ (80 mm)
Shot Weight (PS): 723 g (60 mm), 984 g (70 mm), 1,286 g (80 mm)
Maximum Injection Pressure: 2,500 bar (60 mm), 2,000 bar (70 mm), 1,530 bar (80 mm)
Maximum Injection Rate: 1,132 cm³/s (60 mm), 1,540 cm³/s (70 mm), 2,012 cm³/s (80 mm)
Plasticizing Capacity: 60 mm screw: 125 kg/h; 80 mm screw: 175 kg/h
Polyamide (PA 6.6) Capacity: Approximately 62–88 kg/h, depending on screw diameter
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: Arburg — ALLROUNDER SELECTA 630 S 2500-2100. Machine type: hydraulic injection moulding machine. Year of manufacture: February 2002. Technical condition: listed as Good. Current state: visible but unplugged.
Key technical data (as provided): clamping force 2,500 kN (250 tonnes). Opening force 725 kN. Maximum opening stroke 600 mm. Mould height range 300–700 mm (configuration dependent). Maximum daylight between platens 1,300 mm. Tie bar spacing (H × V) 630 × 630 mm. Platen size 900 × 900 mm. Maximum moving platen load 2,500 kg. Ejector force 90 kN with 225 mm ejector stroke.
Screw and injection data (provided options): screw diameter options 60 mm, 70 mm and 80 mm. Shot volumes: 792 cm³ (60 mm), 1,078 cm³ (70 mm), 1,407 cm³ (80 mm). Shot weights (PS): 723 g (60 mm), 984 g (70 mm), 1,286 g (80 mm). Maximum injection pressures: 2,500 bar (60 mm), 2,000 bar (70 mm), 1,530 bar (80 mm). Maximum injection rates: 1,132 cm³/s (60 mm), 1,540 cm³/s (70 mm), 2,012 cm³/s (80 mm). Plasticizing capacity listed as 125 kg/h for 60 mm screw and 175 kg/h for 80 mm screw. Polyamide (PA 6.6) capacity given approximately 62–88 kg/h depending on screw diameter.
Visible components and condition notes: four large tie bars and the fixed and moving platens are present, with platen faces showing multiple through-holes for mold mounting and tie bar clamps on the moving platen. Some surface wear/discoloration is visible on tie bars. An operator control console and control panel with multiple key sections and a prominent red emergency stop are fitted; the machine column adjacent to the control panel is green. A light/stack tower with red and amber segments and a red warning indicator are mounted on the machine column. A yellow safety guard/door with a window and black handle is fitted at the left side. A bundle of cables or a harness is draped over the tie bars; cables and hoses also appear routed along the machine base (this observation is less certain). A red plastic crate appears stored in an open compartment under the machine (observation less certain).
Please verify all specifications and inspect the machine in person or request additional documentation, test reports or photos before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 4 |
| Last activity | Oct. 23, 2026 |
Шприцмашина Arburg ALLROUNDER SELECTA 630 S 2500-2100
Vstřikovací lis Arburg ALLROUNDER SELECTA 630 S 2500-2100
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Sprøjtestøbemaskine
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Spritzgießmaschine
Πρέσα έγχυσης Arburg ALLROUNDER SELECTA 630 S 2500-2100
ARBURG ALLROUNDER SELECTA 630 S 2500-2100
Inyectora Arburg ALLROUNDER SELECTA 630 S 2500-2100
Presse à injecter Arburg ALLROUNDER SELECTA 630 S 2500-2100
Stroj za injekcijsko prešanje Arburg ALLROUNDER SELECTA 630 S 2500-2100
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Fröccsöntőgép
Pressa a iniezione Arburg ALLROUNDER SELECTA 630 S 2500-2100
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Įpurškimo liejimo staklės
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Spuitgietmachine
Wtryskarka Arburg ALLROUNDER SELECTA 630 S 2500-2100
Injetora Arburg ALLROUNDER SELECTA 630 S 2500-2100
Mașină de injectat Arburg ALLROUNDER SELECTA 630 S 2500-2100
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Термопластавтомат
Mašina za injekciono prešanje Arburg ALLROUNDER SELECTA 630 S 2500-2100
Arburg ALLROUNDER SELECTA 630 S 2500-2100 Formsprutningsmaskin
Enjeksiyon makinesi Arburg ALLROUNDER SELECTA 630 S 2500-2100
EN
- Languages
English (GB)