Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | 570 C 2000-675 / 350 |
| Year | 2001 |
| Location | Italy
|
This listing features an Arburg 570 C 2000-675 / 350 injection moulding machine, manufactured in 2001. It offers a clamping force of 200 tons and a screw diameter of 45 mm. The tie bar spacing measures 570 mm both horizontally and vertically, providing ample space for mold installation. The machine's calculated injection volume is 286 cm³. It has an opening stroke of 650 mm, suitable for various mold thicknesses.
The machine is equipped with a Euromap 12 robot interface and comes with an attached robotic arm, likely intended for part handling or automation, enhancing production efficiency. The control panel is located at the front right side of the machine and features a display and keypad for operation control.
The clamping unit includes a platen with multiple mounting holes and a large central opening. The platen surface shows signs of use with some surface marks but no major damage or cracks. Tie bars exhibit minor surface wear and slight rust, which is typical for used equipment.
Hydraulic or electric injection units with yellow and green casing are visible, along with multiple hydraulic and pneumatic lines and cables connected to the machine. Large hydraulic cylinders and an injection barrel are also part of the setup.
Additional features include a silicone press with 12-zone mold heating, two water channel zones, and a 6-zone thermoregulator control system. The machine includes four radial jacks plus two mold nozzles, Euromap 2000-675 compatibility, a moving floor travel of 650 mm, and one air blow.
A WAGNER Reinhardt-Technik pumping unit model LSR 200l and Twin from 2017 is part of the equipment, indicating auxiliary support for liquid silicone rubber processing. Overall, the machine appears clean, well-maintained, and ready for operation, with no visible damage that would affect functionality.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Data sheet
Brand: ARBURG
Model: 570 C 2000-675 / 350
Tonnage: 200
Year: 2001
Column passage: 570 x 570
Screw diameter: a: 45 b: 35
Calculated injection volume: a: 286 cm3 b: 139 cm3
Min / Max mold thickness: 300
Euromap 12 Robot Interface: Yes
Jacks: 4 radial + 2 mold nozzles
Euromap: 2000-675
Moving floor travel: 650
Air blow: 1
Description
SILICONE PRESS
12 zone mold heating
water channels 2 zones
6-zone thermoregulator control
WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the tonnage of this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine has a tonnage of 200.
When was this ARBURG 570 C 2000-675 / 350 manufactured?
This ARBURG 570 C 2000-675 / 350 injection moulding machine was manufactured in 2001.
What is the column passage size of this injection moulding machine?
This injection moulding machine features a column passage of 570 x 570 mm.
What are the screw diameters of this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine has a screw diameter of 45 mm and 35 mm.
What is the calculated injection volume of this injection moulding machine?
This injection moulding machine has a calculated injection volume of 286 cm3 and 139 cm3.
What is the mold thickness range for this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine supports a minimum and maximum mold thickness of 300 mm.
Does this injection moulding machine have a robot interface?
This injection moulding machine includes a Euromap 12 robot interface.
What pumping unit is included with this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine includes a WAGNER Reinhardt-Technik pumping unit model LSR 200l and Twin from 2017.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 247 |
| Last activity | Oct. 31, 2026 |
Data sheet
Brand: ARBURG
Model: 570 C 2000-675 / 350
Tonnage: 200
Year: 2001
Column passage: 570 x 570
Screw diameter: a: 45 b: 35
Calculated injection volume: a: 286 cm3 b: 139 cm3
Min / Max mold thickness: 300
Euromap 12 Robot Interface: Yes
Jacks: 4 radial + 2 mold nozzles
Euromap: 2000-675
Moving floor travel: 650
Air blow: 1
Description
SILICONE PRESS
12 zone mold heating
water channels 2 zones
6-zone thermoregulator control
WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the tonnage of this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine has a tonnage of 200.
When was this ARBURG 570 C 2000-675 / 350 manufactured?
This ARBURG 570 C 2000-675 / 350 injection moulding machine was manufactured in 2001.
What is the column passage size of this injection moulding machine?
This injection moulding machine features a column passage of 570 x 570 mm.
What are the screw diameters of this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine has a screw diameter of 45 mm and 35 mm.
What is the calculated injection volume of this injection moulding machine?
This injection moulding machine has a calculated injection volume of 286 cm3 and 139 cm3.
What is the mold thickness range for this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine supports a minimum and maximum mold thickness of 300 mm.
Does this injection moulding machine have a robot interface?
This injection moulding machine includes a Euromap 12 robot interface.
What pumping unit is included with this ARBURG 570 C 2000-675 / 350?
This ARBURG 570 C 2000-675 / 350 injection moulding machine includes a WAGNER Reinhardt-Technik pumping unit model LSR 200l and Twin from 2017.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features an Arburg 570 C 2000-675 / 350 injection moulding machine, manufactured in 2001. It offers a clamping force of 200 tons and a screw diameter of 45 mm. The tie bar spacing measures 570 mm both horizontally and vertically, providing ample space for mold installation. The machine's calculated injection volume is 286 cm³. It has an opening stroke of 650 mm, suitable for various mold thicknesses.
The machine is equipped with a Euromap 12 robot interface and comes with an attached robotic arm, likely intended for part handling or automation, enhancing production efficiency. The control panel is located at the front right side of the machine and features a display and keypad for operation control.
The clamping unit includes a platen with multiple mounting holes and a large central opening. The platen surface shows signs of use with some surface marks but no major damage or cracks. Tie bars exhibit minor surface wear and slight rust, which is typical for used equipment.
Hydraulic or electric injection units with yellow and green casing are visible, along with multiple hydraulic and pneumatic lines and cables connected to the machine. Large hydraulic cylinders and an injection barrel are also part of the setup.
Additional features include a silicone press with 12-zone mold heating, two water channel zones, and a 6-zone thermoregulator control system. The machine includes four radial jacks plus two mold nozzles, Euromap 2000-675 compatibility, a moving floor travel of 650 mm, and one air blow.
A WAGNER Reinhardt-Technik pumping unit model LSR 200l and Twin from 2017 is part of the equipment, indicating auxiliary support for liquid silicone rubber processing. Overall, the machine appears clean, well-maintained, and ready for operation, with no visible damage that would affect functionality.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 247 |
| Last activity | Oct. 31, 2026 |
Arburg 570 C 2000-675 / 350
Vstřikolis Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350 Spritzgießmaschine
Arburg 570 C 2000-675 / 350
Used Arburg 570 C 2000-675 / 350 Injection moulding machine
Inyectora de plástico Arburg 570 C 2000-675 / 350
Presse à injecter Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Pressa ad iniezione usato Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Wtryskarka Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350 Термопластавтомат
Arburg 570 C 2000-675 / 350
Arburg 570 C 2000-675 / 350
Enjeksiyon kalıplama makinesi Arburg 570 C 2000-675 / 350
EN
- Languages
English (GB)