Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | 320 C 500-170 |
| Year | 2014 |
| Location | Slovakia
|
This Arburg 320 C 500-170 injection moulding machine, manufactured in 2014, is designed for thermoplastics processing. It features a clamping force of 500 kN (approximately 50 tons) and a screw diameter of 25 mm, suitable for medium-sized production runs. The machine has a shot weight capacity of 75 grams and an opening stroke of 550 mm, allowing for a variety of mold sizes. The tie bar spacing measures 320 × 320 mm, providing ample space for mold installation and operation.
The injection unit includes a high wear-resistant 25 mm screw with a standard flat-ended geometry coupling and an open nozzle equipped with a heater band. The clamping unit is equipped with a mounting platen set featuring a central diameter of 125 mm, a hydraulic ejector with quick-coupling, and a core pull mechanism with serial movement and holding pressure controlled via a check valve.
The machine is painted green with yellow safety doors that have transparent windows for mold area visibility, enhancing operator safety. It includes a control panel with a screen and keypad located on the right side for easy operation. The machine is mounted on wooden pallets, indicating it is prepared for mobility or storage.
Additionally, a conveyor belt with a safety cage is attached for efficient part removal and operator protection. The machine appears clean and well-maintained with no visible external damage or missing parts. Electrical connections and cables are intact and properly installed.
With a total weight of 2400 kg, this Arburg Allrounder 320 C e² Golden Edition model is a robust and versatile injection moulding machine suitable for various production needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Arburg 320 C 500-170 injection moulding machine, manufactured in 2014, is designed for thermoplastics processing. It features a clamping force of 500 kN (approximately 50 tons) and a screw diameter of 25 mm, suitable for medium-sized production runs. The machine has a shot weight capacity of 75 grams and an opening stroke of 550 mm, allowing for a variety of mold sizes. The tie bar spacing measures 320 × 320 mm, providing ample space for mold installation and operation.
The injection unit includes a high wear-resistant 25 mm screw with a standard flat-ended geometry coupling and an open nozzle equipped with a heater band. The clamping unit is equipped with a mounting platen set featuring a central diameter of 125 mm, a hydraulic ejector with quick-coupling, and a core pull mechanism with serial movement and holding pressure controlled via a check valve.
The machine is painted green with yellow safety doors that have transparent windows for mold area visibility, enhancing operator safety. It includes a control panel with a screen and keypad located on the right side for easy operation. The machine is mounted on wooden pallets, indicating it is prepared for mobility or storage.
Additionally, a conveyor belt with a safety cage is attached for efficient part removal and operator protection. The machine appears clean and well-maintained with no visible external damage or missing parts. Electrical connections and cables are intact and properly installed.
With a total weight of 2400 kg, this Arburg Allrounder 320 C e² Golden Edition model is a robust and versatile injection moulding machine suitable for various production needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Машина за леене под налягане Arburg 320 C 500-170
Vstřikolis Arburg 320 C 500-170
Arburg 320 C 500-170 Sprøjtestøbemaskine
Arburg 320 C 500-170 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Arburg 320 C 500-170
Arburg 320 C 500-170 Injection moulding machine
Inyectora de plástico Arburg 320 C 500-170
Presse à injecter Arburg 320 C 500-170
Stroj za injekcijsko prešanje Arburg 320 C 500-170
Arburg 320 C 500-170 Fröccsöntő gép
Pressa ad iniezione Arburg 320 C 500-170
Įpurškimo formavimo mašina Arburg 320 C 500-170
Arburg 320 C 500-170 Spuitgietmachine
Wtryskarka Arburg 320 C 500-170
Máquina de injecção Arburg 320 C 500-170
Mașină de turnat prin injecție Arburg 320 C 500-170
Arburg 320 C 500-170 Термопластавтомат
Mašina za brizganje Arburg 320 C 500-170
Arburg 320 C 500-170 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Arburg 320 C 500-170
EN
- Languages
English (GB)