Contact us to receive an offer.
| Manufacturer | AMADA |
|---|---|
| Model | HFP 20 50 |
| Year | 2005 |
| Location | Netherlands
|
| Category | Bending - CNC press brakes |
| Strength | 50 T |
| Folding length | 2050 mm |
| CNC | AMNPC |
| Axis number | 8 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Datasheet | Amada HFP 20 50 |
| Last availability date | 21/10/2026 |
| Product id | P261021179 |
| Language |
CNC абкант преса AMADA HFP 20 50
CNC ohraňovací lis AMADA HFP 20 50
AMADA HFP 20 50 CNC-kantpresse
AMADA HFP 20 50 CNC-Abkantpresse
CNC στραντζόπρεσα AMADA HFP 20 50
AMADA HFP 20 50 CNC press brake
Prensa plegadora CNC AMADA HFP 20 50
Presse plieuse CNC AMADA HFP 20 50
CNC abkant preša AMADA HFP 20 50
AMADA HFP 20 50 CNC él-hajlító prés
Piegatrice CNC AMADA HFP 20 50
AMADA HFP 20 50 CNC lenkimo presas
AMADA HFP 20 50 CNC-kantpers
Prasa krawędziowa CNC AMADA HFP 20 50
Prensa dobradeira CNC AMADA HFP 20 50
Presă abkant CNC AMADA HFP 20 50
AMADA HFP 20 50 Листогибочный пресс с ЧПУ
CNC abkant presa AMADA HFP 20 50
AMADA HFP 20 50 CNC-kantpress
CNC abkant pres AMADA HFP 20 50
|
AMADA HFP 20 50 CNC press brake, manufactured in 2005. The machine has a stated pressing strength of 50.0 T and a folding length of 2050.0 mm. It is equipped with an 8-axis AMNPC CNC controller. The listed axes are Y1, Y2, X1, X2, R1, R2, Z1 and Z2.
The machine has Wila hydraulic upper and lower clamping. Tooling or a clamping rail is present along the upper work area, and a rear-gauge assembly with horizontal rails and movable-looking support fingers is visible behind the bed. An operator control pendant is mounted on an articulated arm at the left side. An orange foot pedal is also present at the front of the machine.
The current description states that a new PC is installed in the electrical cabinet. The cabinet is open in the available views, showing circuit breakers, control components, wiring and cable ducts, along with a component labeled SBS by ACTIA. The cabinet contains exposed electrical components when open; appropriate care is required around the open cabinet.
The red front panels show visible scuffs, dirt, paint loss and worn areas. Marks and worn spots are also present on the red interior surfaces. The description does not provide information on operating condition or testing, so these are not stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
AMNPC CNC controller (8-axis)
Y1, Y2, X1, X2, R1, R2, Z1, and Z2
Wila hydraulic upper and lower clamping
New PC in the electrical cabinet
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 199 |
| Last activity | Oct. 22, 2026 |
AMNPC CNC controller (8-axis)
Y1, Y2, X1, X2, R1, R2, Z1, and Z2
Wila hydraulic upper and lower clamping
New PC in the electrical cabinet
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Bending - CNC press brakes |
| Strength | 50 T |
| Folding length | 2050 mm |
| CNC | AMNPC |
| Axis number | 8 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Datasheet | Amada HFP 20 50 |
| Last availability date | 21/10/2026 |
| Product id | P261021179 |
| Language |
CNC абкант преса AMADA HFP 20 50
CNC ohraňovací lis AMADA HFP 20 50
AMADA HFP 20 50 CNC-kantpresse
AMADA HFP 20 50 CNC-Abkantpresse
CNC στραντζόπρεσα AMADA HFP 20 50
AMADA HFP 20 50 CNC press brake
Prensa plegadora CNC AMADA HFP 20 50
Presse plieuse CNC AMADA HFP 20 50
CNC abkant preša AMADA HFP 20 50
AMADA HFP 20 50 CNC él-hajlító prés
Piegatrice CNC AMADA HFP 20 50
AMADA HFP 20 50 CNC lenkimo presas
AMADA HFP 20 50 CNC-kantpers
Prasa krawędziowa CNC AMADA HFP 20 50
Prensa dobradeira CNC AMADA HFP 20 50
Presă abkant CNC AMADA HFP 20 50
AMADA HFP 20 50 Листогибочный пресс с ЧПУ
CNC abkant presa AMADA HFP 20 50
AMADA HFP 20 50 CNC-kantpress
CNC abkant pres AMADA HFP 20 50
|
AMADA HFP 20 50 CNC press brake, manufactured in 2005. The machine has a stated pressing strength of 50.0 T and a folding length of 2050.0 mm. It is equipped with an 8-axis AMNPC CNC controller. The listed axes are Y1, Y2, X1, X2, R1, R2, Z1 and Z2.
The machine has Wila hydraulic upper and lower clamping. Tooling or a clamping rail is present along the upper work area, and a rear-gauge assembly with horizontal rails and movable-looking support fingers is visible behind the bed. An operator control pendant is mounted on an articulated arm at the left side. An orange foot pedal is also present at the front of the machine.
The current description states that a new PC is installed in the electrical cabinet. The cabinet is open in the available views, showing circuit breakers, control components, wiring and cable ducts, along with a component labeled SBS by ACTIA. The cabinet contains exposed electrical components when open; appropriate care is required around the open cabinet.
The red front panels show visible scuffs, dirt, paint loss and worn areas. Marks and worn spots are also present on the red interior surfaces. The description does not provide information on operating condition or testing, so these are not stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 199 |
| Last activity | Oct. 22, 2026 |
| Strength | 176 T |
|---|---|
| Distance between uprights | 2590.8 mm |
| Throat | 330.2 mm |
| Engine Power | 11 kW |
| Folding length | 3098.8 mm |
|---|---|
| CNC | |
| Vertical stroke | 177.8 mm |
USA
| Strength | 132 T |
|---|---|
| Distance between uprights | 2540 mm |
| Throat | 406.4 mm |
| Engine Power | 11 kW |
| Folding length | 3098.8 mm |
|---|---|
| CNC | DELEM |
| Vertical stroke | 254 mm |
| Strength | 50 T |
|---|---|
| Distance between uprights | 2200 mm |
| Engine Power | 7 kW |
| Folding length | 2500 mm |
|---|---|
| CNC | MASTER TASK 3 ASSI |
| Hole | No |
| Strength | 50 T |
|---|---|
| Distance between uprights | 1850 mm |
| Axis number | 3 |
| Hole | No |
| Folding length | 2000 mm |
|---|---|
| CNC | MASTER 3 ASSI |
| Engine Power | 7 kW |
| Strength | 50 T |
|---|---|
| Distance between uprights | 18500 mm |
| Engine Power | 7 kW |
| Folding length | 2000 mm |
|---|---|
| CNC | MASTER TASK 3 ASSI |
| Hole | No |
| Strength | 35 T |
|---|---|
| Distance between uprights | 1850 mm |
| Engine Power | 5 kW |
| Folding length | 2000 mm |
|---|---|
| CNC | TASK 84 |
| Hole | No |
Czech Republic
2006
| Strength | T |
|---|---|
| Distance between uprights | 2665 mm |
| Throat | 420 mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | |
| Hole |
Germany
2021
| Strength | 220 T |
|---|---|
| Distance between uprights | 3760 mm |
| Throat | 420 mm |
| Working speed | mm/s |
| Engine Power | 25.5 kW |
| Folding length | 4000 mm |
|---|---|
| CNC | Amada 3i |
| Vertical stroke | 350 mm |
| Axis number | 8 |
| Hole | No |
Turkey
2021
| Strength | 100 T |
|---|---|
| CNC |
| Folding length | 3000 mm |
|---|---|
| Axis number | 4 |
| Strength | 25 T |
|---|---|
| Distance between uprights | 1050 mm |
| Engine Power | 4 kW |
| Folding length | 1300 mm |
|---|---|
| CNC | SEPA TASK 3 ASSI |
| Hole | No |
Poland
2003
| Strength | 170 T |
|---|---|
| Distance between uprights | 3650 mm |
| Throat | 420 mm |
| Working speed | 10 mm/s |
| Engine Power | 16.5 kW |
| Folding length | 4150 mm |
|---|---|
| CNC | Operateur III |
| Vertical stroke | 400 mm |
| Axis number | 6 |
United Kingdom
2010
| Strength | 50 T |
|---|---|
| Distance between uprights | 1665 mm |
| Throat | 100 mm |
| Working speed | 10 mm/s |
| Folding length | 2090 mm |
|---|---|
| CNC | AB PAD Controller |
| Vertical stroke | 200 mm |
| Axis number | 8 |
Czech Republic
2005
| Strength | 80 T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
Poland
1998
| Strength | 80 T |
|---|---|
| Distance between uprights | 2120 mm |
| Throat | 300 mm |
| Working speed | 10 mm/s |
| Engine Power | 6 kW |
| Folding length | 2550 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | 8 |
| Hole | No |
Germany
2005
| Strength | 3200 T |
|---|---|
| Distance between uprights | 3760 mm |
| Vertical stroke | 350 mm |
| Folding length | 4280 mm |
|---|---|
| CNC | Operateur 2000 |
Czech Republic
2005
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
United Kingdom
2016
| Strength | 50 T |
|---|---|
| CNC | |
| Working speed | 10 mm/s |
| Folding length | 2090 mm |
|---|---|
| Vertical stroke | 200 mm |
| Axis number | 8 |
United Kingdom
2013
| Strength | 200 T |
|---|---|
| Distance between uprights | 3760 mm |
| Throat | 420 mm |
| Working speed | 1100 mm/s |
| Folding length | 4000 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | 4 |
United Kingdom
2015
| Strength | 100 T |
|---|---|
| Distance between uprights | 2705 mm |
| Throat | 420 mm |
| Working speed | 1100 mm/s |
| Folding length | 3000 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | 8 |
United Kingdom
2014
| Strength | 1000 T |
|---|---|
| Distance between uprights | 2705 mm |
| Throat | 420 mm |
| Working speed | 1100 mm/s |
| Folding length | 3110 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | 4 |
| Strength | 125 T |
|---|---|
| Distance between uprights | 2550 mm |
| Vertical stroke | 105 mm |
| Engine Power | 9 kW |
| Folding length | 3100 mm |
|---|---|
| CNC | Cybelec Cybtouch 8 |
| Axis number | 2 |
United Kingdom
2018
| Strength | 170 T |
|---|---|
| Distance between uprights | 2700 mm |
| Throat | 420 mm |
| Working speed | 10 mm/s |
| Folding length | 3170 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
Czech Republic
2001
| Strength | 80 T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | 2620 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | 4 |
| Hole |
| Strength | 170 T |
|---|---|
| Distance between uprights | 3760 mm |
| Throat | 420 mm |
| Working speed | 10 mm/s |
| Engine Power | 12.5 kW |
| Folding length | 4230 mm |
|---|---|
| CNC | CD2000 |
| Vertical stroke | 200 mm |
| Axis number | 8 |
| Hole | No |
Germany
1991
| Strength | 1.3 T |
|---|---|
| CNC | DELEM DA 58 |
| Engine Power | 11 kW |
| Folding length | 3700 mm |
|---|---|
| Vertical stroke | 180 mm |
Poland
1997
| Strength | 50 T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | 1250 mm |
|---|---|
| CNC | CD 2000 |
| Vertical stroke | 100 mm |
| Axis number | 4 |
| Hole |
United Kingdom
| Strength | 100 T |
|---|---|
| Distance between uprights | 2700 mm |
| Throat | 410 mm |
| Working speed | 7.5 mm/s |
| Engine Power | 9 kW |
| Folding length | 3220 mm |
|---|---|
| CNC | |
| Vertical stroke | 200 mm |
| Axis number | 8 |
Slovenia
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
USA
1991
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
Italy
France
EN
- Languages
English (GB)