38,500 €
Make an offer| Metal length | 2000 mm |
| Metal width | 6000 mm |
| Type of source | Plasma |
| Source model | PEGAS 121 |
| Type of CNC | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Last availability date | 21/05/2026 |
The ALFAIN ALFATEC CNC 2x6 is a plasma cutting machine manufactured in 2022, designed for precision cutting tasks. It features a sectional cutting gantry measuring 2 by 6 meters, providing a working area of 2000 x 6000 mm suitable for processing metal sheets of the same dimensions. The machine is engineered to handle loads up to 550 kg/m², supporting substantial material weight during operation.
Movement across the XYZ axes is achieved through four motors paired with planetary gearboxes and precise linear guidance systems, ensuring accurate positioning and smooth operation. The torch height above the material is adaptively controlled, enhancing cutting quality and efficiency. The control system includes a console equipped with a 24-inch monitor, running the CutComp control program supplemented by the technological software WRYKRYS for optimized cutting processes.
The plasma source integrated with this machine is the PEGAS 121 PLASMA CNC, connected via a 9.0-meter coaxial cable (SV-105, 6-pin), and it comes with a plasma burner model SVM-125. The setup is configured for propane cutting, including both standard and automatic modes.
Additional equipment includes an extraction and filtration unit, the CNC TFD, with a capacity of 3650 m³/hr and necessary accessories to maintain a clean working environment.
Visual inspection confirms the presence of the CNC plasma cutting machine labeled 'ALFATEC CNC' on the bridge, with a cutting torch mounted and protected by a red shield. The cutting bed shows signs of use, with worn and burnt slats, indicating previous operation but no visible structural damage. Cable carrier chains are installed on the moving bridge for effective cable management. The machine and its control panel, located on a stand adjacent to the equipment, appear clean and intact, housed indoors in a workshop environment. Nearby, there is additional equipment branded Tigemma, wrapped in protective plastic.
This comprehensive setup offers a robust solution for industrial plasma cutting needs, combining precise mechanical components with advanced control software and supporting accessories.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Plasma cutting machine ALFATEC CNC, r.v. 2022, cutting gantry 2x6m sectional, working area 2000x6000mm with possible load 550kg/m2,, movements in XYZ axes realized by 4 motors and planetary gearboxes with precise linear guidance, adaptive control of the torch height above the material to be cut, control console with 24´´ monitor, control program CutComp supplemented with technological program WRYKRYS, plasma source PEGAS 121 PLASMA CNC with coaxial cable 9,0m SV-105 - 6pin, set for propane cutting STANDART + AUTOMATIC, burner PLASMA SVM-125 - machine, extraction and filtration unit CNC TFD 3650m3/hr with accessories.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this ALFAIN ALFATEC CNC 2x6 system manufactured?
This ALFAIN ALFATEC CNC 2x6 plasma/oxy-cutting system was manufactured in 2022.
What is the cutting area of this equipment?
This equipment features a cutting area of 2x6 meters.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 8 |
| Last activity | June 9, 2026 |
Plasma cutting machine ALFATEC CNC, r.v. 2022, cutting gantry 2x6m sectional, working area 2000x6000mm with possible load 550kg/m2,, movements in XYZ axes realized by 4 motors and planetary gearboxes with precise linear guidance, adaptive control of the torch height above the material to be cut, control console with 24´´ monitor, control program CutComp supplemented with technological program WRYKRYS, plasma source PEGAS 121 PLASMA CNC with coaxial cable 9,0m SV-105 - 6pin, set for propane cutting STANDART + AUTOMATIC, burner PLASMA SVM-125 - machine, extraction and filtration unit CNC TFD 3650m3/hr with accessories.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this ALFAIN ALFATEC CNC 2x6 system manufactured?
This ALFAIN ALFATEC CNC 2x6 plasma/oxy-cutting system was manufactured in 2022.
What is the cutting area of this equipment?
This equipment features a cutting area of 2x6 meters.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Metal length | 2000 mm |
| Metal width | 6000 mm |
| Type of source | Plasma |
| Source model | PEGAS 121 |
| Type of CNC | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Last availability date | 21/05/2026 |
The ALFAIN ALFATEC CNC 2x6 is a plasma cutting machine manufactured in 2022, designed for precision cutting tasks. It features a sectional cutting gantry measuring 2 by 6 meters, providing a working area of 2000 x 6000 mm suitable for processing metal sheets of the same dimensions. The machine is engineered to handle loads up to 550 kg/m², supporting substantial material weight during operation.
Movement across the XYZ axes is achieved through four motors paired with planetary gearboxes and precise linear guidance systems, ensuring accurate positioning and smooth operation. The torch height above the material is adaptively controlled, enhancing cutting quality and efficiency. The control system includes a console equipped with a 24-inch monitor, running the CutComp control program supplemented by the technological software WRYKRYS for optimized cutting processes.
The plasma source integrated with this machine is the PEGAS 121 PLASMA CNC, connected via a 9.0-meter coaxial cable (SV-105, 6-pin), and it comes with a plasma burner model SVM-125. The setup is configured for propane cutting, including both standard and automatic modes.
Additional equipment includes an extraction and filtration unit, the CNC TFD, with a capacity of 3650 m³/hr and necessary accessories to maintain a clean working environment.
Visual inspection confirms the presence of the CNC plasma cutting machine labeled 'ALFATEC CNC' on the bridge, with a cutting torch mounted and protected by a red shield. The cutting bed shows signs of use, with worn and burnt slats, indicating previous operation but no visible structural damage. Cable carrier chains are installed on the moving bridge for effective cable management. The machine and its control panel, located on a stand adjacent to the equipment, appear clean and intact, housed indoors in a workshop environment. Nearby, there is additional equipment branded Tigemma, wrapped in protective plastic.
This comprehensive setup offers a robust solution for industrial plasma cutting needs, combining precise mechanical components with advanced control software and supporting accessories.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 8 |
| Last activity | June 9, 2026 |
Машина за рязане - плазма / газ ALFAIN ALFATEC CNC 2x6
Řezačka plasmová / plynová ALFAIN ALFATEC CNC 2x6
ALFAIN ALFATEC CNC 2x6 Skæremaskine - Plasma/gas
ALFAIN ALFATEC CNC 2x6 Schneidemaschine - Plasma / gas
Κοπτική μηχανή - Plasma / gas ALFAIN ALFATEC CNC 2x6
ALFAIN ALFATEC CNC 2x6 Cutting machine - Plasma / gas
Máquina de corte por plasma / gas ALFAIN ALFATEC CNC 2x6
Machine de découpe plasma / gaz ALFAIN ALFATEC CNC 2x6
Stroj za rezanje - plazma / plin ALFAIN ALFATEC CNC 2x6
ALFAIN ALFATEC CNC 2x6 Vágógép - Plazma/gáz
Impianto taglio plasma/ossitaglio ALFAIN ALFATEC CNC 2x6
Pjovimo mašina - Plazminė/dujinė ALFAIN ALFATEC CNC 2x6
ALFAIN ALFATEC CNC 2x6 Snijmachine - Plasma/gas
Wycinarka plazmowa / gazowa ALFAIN ALFATEC CNC 2x6
Máquina de corte - Plasma / gás ALFAIN ALFATEC CNC 2x6
Mașină de tăiat - Plasmă/gaz ALFAIN ALFATEC CNC 2x6
ALFAIN ALFATEC CNC 2x6 Станок для резки плазма / газ
Mašina za sečenje - plazma / gas ALFAIN ALFATEC CNC 2x6
ALFAIN ALFATEC CNC 2x6 Skärmaskin - Plasma / gas
Kesim makinesi ALFAIN ALFATEC CNC 2x6
EN
- Languages
English (GB)