Contact us to receive an offer.
| Manufacturer | Alfa Laval |
|---|---|
| Model | VDDS808BD72 CB |
| Year | 2009 |
| Location | Romania
|
Six V-type industrial dry coolers manufactured by Alfa Laval S.p.A. (Italy). Removed from an in-house installation. Each unit shows very low running time (approximately 300–400 operating hours per unit) and is described as being in very good technical condition.
Technical data
- Manufacturer: Alfa Laval S.p.A., Italy
- Model: VDDS808BD72 CB
- Year of manufacture: 2009
- Design: V-type dry cooler with copper tube / aluminium fin coil
- Fans: 16 per unit (8 pairs), axial type, 800 mm diameter
- Power supply: 400 V / 50 Hz, delta-connected motors
- Speed control: built-in
- Overall dimensions (per unit): approx. 10,800 x 2,230 x 2,500 mm (L x W x H)
- Net weight: 3,210 kg per unit
- Operating fluid: glycol solution
- Operating regime in the original installation: inlet 150 C / outlet 50 C
- Article no.: 3289016561
Condition
- Six units are offered as a single lot only; individual units are not available.
- Five units are complete. One unit is incomplete: it has 7 of 16 fans fitted; the remaining fans were removed and reused as spares. This incomplete unit is offered at a reduced price and can be completed with standard 800 mm fans.
- Coils reported undamaged with no bent fins or impact marks; cleaning only indicated.
- Painted casings and galvanised steel support frames are included.
Documentation
Original Alfa Laval factory documentation and the manufacturer manual (VDD / VDD6) are available, and a declaration of conformity is included. Additional technical documentation can be provided on request.
Price and terms
- The six units are sold as a complete lot only. Price is for the entire lot, ex works, at ground level, VAT excluded.
- Transport at buyer’s expense (oversized load; approx. 3.2 t per unit).
- Additional photos and technical documentation available on request.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Six V-type industrial dry coolers manufactured by Alfa Laval S.p.A. (Italy), removed from our own installation. Very low running time – approximately 300–400 operating hours per unit – and in very good technical condition.
TECHNICAL DATA
Manufacturer: Alfa Laval S.p.A., Italy
Model: VDDS808BD72 CB
Year of manufacture: 2009
Design: V-type dry cooler, copper tube / aluminium fin coil
Fans: 16 per unit (8 pairs), 800 mm diameter, axial
Power supply: 400 V / 50 Hz, delta-connected motors
Speed control: built-in
Overall dimensions: approx. 10,800 x 2,230 x 2,500 mm (L x W x H)
Net weight: 3,210 kg per unit
Operating fluid: glycol solution
Operating regime in the original installation: inlet 150 C / outlet 50 C
Article no.: 3289016561 / Serial numbers: 2218123 to 2218128
CONDITION
- 5 units complete and fully operational
- 1 unit with 7 of 16 fans fitted; the remaining fans were removed and reused as spares. This unit is offered at a reduced price and can be completed with standard 800 mm fans.
- Coils undamaged, no bent fins or impact marks. Cleaning only.
- Painted casing and galvanised steel support frame included.
DOCUMENTATION
Original Alfa Laval factory test reports available, matching the unit serial numbers:
- Pressure and leak test with dry air at 10 bar plus immersion in water
- Electrical equipment tested at nominal voltage per CEI EN 60204-1
- Declaration of conformity per EN 45014
Original manufacturer manual (VDD / VDD6) and declaration of conformity included.
PRICE AND TERMS
The six units are sold as a complete lot only. Individual units are not available.
Price is for the entire lot, ex works, at ground level, VAT excluded.
Transport at buyer's expense (oversized load, 3.2 t per unit).
Additional photos and technical documentation available on request.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Oct. 14, 2026 |
Six V-type industrial dry coolers manufactured by Alfa Laval S.p.A. (Italy), removed from our own installation. Very low running time – approximately 300–400 operating hours per unit – and in very good technical condition.
TECHNICAL DATA
Manufacturer: Alfa Laval S.p.A., Italy
Model: VDDS808BD72 CB
Year of manufacture: 2009
Design: V-type dry cooler, copper tube / aluminium fin coil
Fans: 16 per unit (8 pairs), 800 mm diameter, axial
Power supply: 400 V / 50 Hz, delta-connected motors
Speed control: built-in
Overall dimensions: approx. 10,800 x 2,230 x 2,500 mm (L x W x H)
Net weight: 3,210 kg per unit
Operating fluid: glycol solution
Operating regime in the original installation: inlet 150 C / outlet 50 C
Article no.: 3289016561 / Serial numbers: 2218123 to 2218128
CONDITION
- 5 units complete and fully operational
- 1 unit with 7 of 16 fans fitted; the remaining fans were removed and reused as spares. This unit is offered at a reduced price and can be completed with standard 800 mm fans.
- Coils undamaged, no bent fins or impact marks. Cleaning only.
- Painted casing and galvanised steel support frame included.
DOCUMENTATION
Original Alfa Laval factory test reports available, matching the unit serial numbers:
- Pressure and leak test with dry air at 10 bar plus immersion in water
- Electrical equipment tested at nominal voltage per CEI EN 60204-1
- Declaration of conformity per EN 45014
Original manufacturer manual (VDD / VDD6) and declaration of conformity included.
PRICE AND TERMS
The six units are sold as a complete lot only. Individual units are not available.
Price is for the entire lot, ex works, at ground level, VAT excluded.
Transport at buyer's expense (oversized load, 3.2 t per unit).
Additional photos and technical documentation available on request.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Six V-type industrial dry coolers manufactured by Alfa Laval S.p.A. (Italy). Removed from an in-house installation. Each unit shows very low running time (approximately 300–400 operating hours per unit) and is described as being in very good technical condition.
Technical data
- Manufacturer: Alfa Laval S.p.A., Italy
- Model: VDDS808BD72 CB
- Year of manufacture: 2009
- Design: V-type dry cooler with copper tube / aluminium fin coil
- Fans: 16 per unit (8 pairs), axial type, 800 mm diameter
- Power supply: 400 V / 50 Hz, delta-connected motors
- Speed control: built-in
- Overall dimensions (per unit): approx. 10,800 x 2,230 x 2,500 mm (L x W x H)
- Net weight: 3,210 kg per unit
- Operating fluid: glycol solution
- Operating regime in the original installation: inlet 150 C / outlet 50 C
- Article no.: 3289016561
Condition
- Six units are offered as a single lot only; individual units are not available.
- Five units are complete. One unit is incomplete: it has 7 of 16 fans fitted; the remaining fans were removed and reused as spares. This incomplete unit is offered at a reduced price and can be completed with standard 800 mm fans.
- Coils reported undamaged with no bent fins or impact marks; cleaning only indicated.
- Painted casings and galvanised steel support frames are included.
Documentation
Original Alfa Laval factory documentation and the manufacturer manual (VDD / VDD6) are available, and a declaration of conformity is included. Additional technical documentation can be provided on request.
Price and terms
- The six units are sold as a complete lot only. Price is for the entire lot, ex works, at ground level, VAT excluded.
- Transport at buyer’s expense (oversized load; approx. 3.2 t per unit).
- Additional photos and technical documentation available on request.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Oct. 14, 2026 |
Чилъри Alfa Laval VDDS808BD72 CB
Chladič Alfa Laval VDDS808BD72 CB
Alfa Laval VDDS808BD72 CB Kølemaskine
Alfa Laval VDDS808BD72 CB Kältemaschine
Ψυγείο Alfa Laval VDDS808BD72 CB
Alfa Laval VDDS808BD72 CB V-type industrial dry coolers – lot of 6 units, 2009, approx. 350 h
Enfriadora Alfa Laval VDDS808BD72 CB
Refroidisseur Alfa Laval VDDS808BD72 CB
Hladnjak Alfa Laval VDDS808BD72 CB
Alfa Laval VDDS808BD72 CB Hűtőgép
Refrigeratore Alfa Laval VDDS808BD72 CB
Alfa Laval VDDS808BD72 CB Aušintuvas
Alfa Laval VDDS808BD72 CB Koelmachine
Agregat wody lodowej chiller Alfa Laval VDDS808BD72 CB
Refrigerador Alfa Laval VDDS808BD72 CB
Răcitor Alfa Laval VDDS808BD72 CB
Alfa Laval VDDS808BD72 CB Чиллер
Chiller Alfa Laval VDDS808BD72 CB
Alfa Laval VDDS808BD72 CB Kylmaskin
Chiller soğutucu Alfa Laval VDDS808BD72 CB
EN
- Languages
English (GB)