Contact us to receive an offer.
| Manufacturer | Agie |
|---|---|
| Model | AGIECUT PROGRESS V2 |
| Year | 2006 |
| Location | Czech Republic
|
The AGIE AGIECUT PROGRESS V2 is a wire EDM cutting machine manufactured in 2006 by Agie, a reputable Swiss company. This machine features a working travel range of 350 mm along the X-axis, 250 mm along the Y-axis, and 250 mm along the Z-axis, allowing precise machining within these dimensions. It can accommodate workpieces up to 750 mm in length, 550 mm in width, and 250 mm in height, with a maximum weight capacity of 200 kg.
The machine supports a maximum taper angle of ±30° over 100 mm and includes U and V-axis travel of ±70 mm, facilitating complex contour machining. It utilizes an AGIE IPG generator with a power supply module, and wire threading is automatic, compatible with wire sizes ranging from 0.10 to 0.33 mm.
The machine measures 1640 mm in length, 2040 mm in width, and 2220 mm in height, with a total weight of approximately 3350 kg. It requires external cooling during operation and can achieve a surface finish with a roughness average (Ra) of 0.2 µm.
The control panel is mounted on the right side and includes a monitor, keyboard, and mouse, providing an operator-friendly interface. The machine enclosure features protective doors equipped with a red safety bar on the front for enhanced safety during operation. Internally, the machine houses multiple cylindrical tanks and spools of wire, all appearing intact without visible damage or leaks.
Overall, the AGIECUT PROGRESS V2 is presented in clean and well-maintained condition, suitable for precision wire EDM cutting tasks within its specified capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Travel (X/Y/Z) 350 × 250 × 250 mm
Max. workpiece dimensions (X/Y/Z) 750 × 550 × 250 mm
Max. workpiece weight 200 kg (450 lbs)
Max. taper angle
+/- 30°, 100 mm
Travel (U/V)
+/- 70 mm
Wire threading - automatic
Wire sizes -
0.10-0.33 mm
0.10-0.33 mm
AGIE IPG generator with power supply module
Machine dimensions (mm)
1640 × 2040 × 2220 mm
Machine weight
3350 kg
Cooling
external cooling required
Best surface
Ra 0,2 µm
Year of manufacture : 2006
Fully functional
Operating hours : 141 796 h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the Agie AGIECUT PROGRESS V2?
This Agie AGIECUT PROGRESS V2 is a wire cutting EDM machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 2006.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 479 |
| Last activity | Oct. 31, 2026 |
Travel (X/Y/Z) 350 × 250 × 250 mm
Max. workpiece dimensions (X/Y/Z) 750 × 550 × 250 mm
Max. workpiece weight 200 kg (450 lbs)
Max. taper angle
+/- 30°, 100 mm
Travel (U/V)
+/- 70 mm
Wire threading - automatic
Wire sizes -
0.10-0.33 mm
0.10-0.33 mm
AGIE IPG generator with power supply module
Machine dimensions (mm)
1640 × 2040 × 2220 mm
Machine weight
3350 kg
Cooling
external cooling required
Best surface
Ra 0,2 µm
Year of manufacture : 2006
Fully functional
Operating hours : 141 796 h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the Agie AGIECUT PROGRESS V2?
This Agie AGIECUT PROGRESS V2 is a wire cutting EDM machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 2006.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The AGIE AGIECUT PROGRESS V2 is a wire EDM cutting machine manufactured in 2006 by Agie, a reputable Swiss company. This machine features a working travel range of 350 mm along the X-axis, 250 mm along the Y-axis, and 250 mm along the Z-axis, allowing precise machining within these dimensions. It can accommodate workpieces up to 750 mm in length, 550 mm in width, and 250 mm in height, with a maximum weight capacity of 200 kg.
The machine supports a maximum taper angle of ±30° over 100 mm and includes U and V-axis travel of ±70 mm, facilitating complex contour machining. It utilizes an AGIE IPG generator with a power supply module, and wire threading is automatic, compatible with wire sizes ranging from 0.10 to 0.33 mm.
The machine measures 1640 mm in length, 2040 mm in width, and 2220 mm in height, with a total weight of approximately 3350 kg. It requires external cooling during operation and can achieve a surface finish with a roughness average (Ra) of 0.2 µm.
The control panel is mounted on the right side and includes a monitor, keyboard, and mouse, providing an operator-friendly interface. The machine enclosure features protective doors equipped with a red safety bar on the front for enhanced safety during operation. Internally, the machine houses multiple cylindrical tanks and spools of wire, all appearing intact without visible damage or leaks.
Overall, the AGIECUT PROGRESS V2 is presented in clean and well-maintained condition, suitable for precision wire EDM cutting tasks within its specified capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 479 |
| Last activity | Oct. 31, 2026 |
Едм машина за рязане на тел Agie AGIECUT PROGRESS V2
Elektroerozivní drátová řezačka Agie AGIECUT PROGRESS V2
Agie AGIECUT PROGRESS V2 Trådskære edm maskine
Agie AGIECUT PROGRESS V2 Drahterodiermaschine
Μηχάνημα κοπής συρμάτων edm Agie AGIECUT PROGRESS V2
Agie AGIECUT PROGRESS V2 Wire cutting edm machine
Máquina de electroerosión por hilo Agie AGIECUT PROGRESS V2
Machine d'électro-érosion par fil Agie AGIECUT PROGRESS V2
EDM stroj za rezanje žice Agie AGIECUT PROGRESS V2
Agie AGIECUT PROGRESS V2 Huzalvágó edm gép
Elettroerosione a filo Agie AGIECUT PROGRESS V2
Vielos pjovimo edm mašina Agie AGIECUT PROGRESS V2
Agie AGIECUT PROGRESS V2 Draadsnij-edm-machine
Wycinarka drutowa Agie AGIECUT PROGRESS V2
Máquina edm para corte de fio Agie AGIECUT PROGRESS V2
Mașină de tăiat cu sârmă EDM Agie AGIECUT PROGRESS V2
Agie AGIECUT PROGRESS V2 Электроэрозионный вырезной станок
EDM mašina za sečenje žice Agie AGIECUT PROGRESS V2
Agie AGIECUT PROGRESS V2 Trådskärning edm maskin
Tel erozyon makinesi Agie AGIECUT PROGRESS V2
EN
- Languages
English (GB)