Contact us to receive an offer.
| Manufacturer | AGIE |
|---|---|
| Model | Agiecut Classic 3S |
| Year | 2005 |
| Location | Slovakia
|
The AGIE Agiecut Classic 3S is a wire EDM (Electrical Discharge Machining) machine manufactured in 2005. It offers precise axis travels with X, Y, and Z movements of 500 mm, 350 mm, and 256 mm respectively, allowing for versatile machining capabilities. The machine can accommodate workpieces with maximum dimensions of 1050 mm in length, 650 mm in width, and 250 mm in height. It supports a maximum workpiece weight of 800 kg when operated without a bath, or up to 400 kg if used within a bath environment.
This wire EDM machine supports wire diameters ranging from 0.15 mm to 0.33 mm and can achieve a maximum taper angle of ±30° at a height of 100 mm, enabling complex and precise cutting operations. The overall machine weight is approximately 3,900 kg, reflecting its robust industrial design.
The machine is equipped with a control console positioned on the right side, featuring a monitor and keyboard for operational control. The main enclosure includes a protective grid and a front access door secured with a red safety bar, enhancing operator safety during use. Inside the enclosure, a ventilation or exhaust duct is installed on the left side, likely to manage airflow and maintain optimal operating conditions.
The wire EDM cutting head assembly includes motor and guide components, with wire guides and a tensioning mechanism positioned near the cutting wire path to ensure accurate wire control during machining. A coolant or fluid nozzle is situated near the cutting area to support the wire EDM process.
The machine shows signs of use, with some dirt and wear marks visible on the lower front panel. Inside the machine chamber, there is evidence of rust and residue buildup on the base plate and surrounding metal surfaces, indicating previous operational use and exposure to machining fluids.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Axis travel (X / Y / Z): 500 mm / 350 mm / 256 mm.
Maximum workpiece dimensions: 1050 x 650 x 250 mm.
Maximum workpiece weight: 800 kg (without bath) or 400 kg (in bath).
Wire diameter: 0.15 mm to 0.33 mm.
Maximum taper: ± 30° at a height of 100 mm.
Machine weight: approximately 3,900 kg.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 7 |
| Last activity | Oct. 31, 2026 |
Axis travel (X / Y / Z): 500 mm / 350 mm / 256 mm.
Maximum workpiece dimensions: 1050 x 650 x 250 mm.
Maximum workpiece weight: 800 kg (without bath) or 400 kg (in bath).
Wire diameter: 0.15 mm to 0.33 mm.
Maximum taper: ± 30° at a height of 100 mm.
Machine weight: approximately 3,900 kg.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The AGIE Agiecut Classic 3S is a wire EDM (Electrical Discharge Machining) machine manufactured in 2005. It offers precise axis travels with X, Y, and Z movements of 500 mm, 350 mm, and 256 mm respectively, allowing for versatile machining capabilities. The machine can accommodate workpieces with maximum dimensions of 1050 mm in length, 650 mm in width, and 250 mm in height. It supports a maximum workpiece weight of 800 kg when operated without a bath, or up to 400 kg if used within a bath environment.
This wire EDM machine supports wire diameters ranging from 0.15 mm to 0.33 mm and can achieve a maximum taper angle of ±30° at a height of 100 mm, enabling complex and precise cutting operations. The overall machine weight is approximately 3,900 kg, reflecting its robust industrial design.
The machine is equipped with a control console positioned on the right side, featuring a monitor and keyboard for operational control. The main enclosure includes a protective grid and a front access door secured with a red safety bar, enhancing operator safety during use. Inside the enclosure, a ventilation or exhaust duct is installed on the left side, likely to manage airflow and maintain optimal operating conditions.
The wire EDM cutting head assembly includes motor and guide components, with wire guides and a tensioning mechanism positioned near the cutting wire path to ensure accurate wire control during machining. A coolant or fluid nozzle is situated near the cutting area to support the wire EDM process.
The machine shows signs of use, with some dirt and wear marks visible on the lower front panel. Inside the machine chamber, there is evidence of rust and residue buildup on the base plate and surrounding metal surfaces, indicating previous operational use and exposure to machining fluids.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 7 |
| Last activity | Oct. 31, 2026 |
Телена електроерозийна машина AGIE Agiecut Classic 3S
Drátový elektroerozivní stroj AGIE Agiecut Classic 3S
AGIE Agiecut Classic 3S Trådgnistmaskiner
AGIE Agiecut Classic 3S Drahterodiermaschine
Μηχανή ηλεκτροδιάβρωσης με σύρμα AGIE Agiecut Classic 3S
AGIE Agiecut Classic 3S Wire cutting EDM machine
Máquina de electroerosión por hilo AGIE Agiecut Classic 3S
Machines d’électroérosion à fil AGIE Agiecut Classic 3S
Elektroerozijski stroj s žicom AGIE Agiecut Classic 3S
AGIE Agiecut Classic 3S Huzalos szikraforgácsoló gépek
Macchina per elettroerosione a filo AGIE Agiecut Classic 3S
AGIE Agiecut Classic 3S Vielinės elektroerozinio pjovimo staklės
AGIE Agiecut Classic 3S Draadvonkmachines
Drążarki elektroerozyjne drutowe AGIE Agiecut Classic 3S
Máquina de eletroerosão a fio AGIE Agiecut Classic 3S
Mașini de electroeroziune cu fir AGIE Agiecut Classic 3S
AGIE Agiecut Classic 3S Проволочно-вырезной электроэрозионный станок
Elektroeroziona mašina sa žicom AGIE Agiecut Classic 3S
AGIE Agiecut Classic 3S Trådgnistmaskiner
Tel erozyon makinesi AGIE Agiecut Classic 3S
EN
- Languages
English (GB)