Contact us to receive an offer.
| Manufacturer | 3D Systems |
|---|---|
| Model | Projet MJP2500 Plus |
| Year | 2018 |
| Location | Switzerland
|
This listing is for a 2018 3D Systems ProJet MJP 2500 Plus 3D printer, a professional-grade additive manufacturing system using Selective Laser Sintering (SLS) / Multi Jet Fusion (MJF) printing technology. The printer offers a build volume of 294 x 211 x 144 mm (length x width x height), allowing for the creation of precise and detailed parts. It features a high resolution of 1600 x 900 x 790 DPI in Ultra High Definition mode with a layer thickness of 32 microns, enabling fine details down to 300 microns or finer. Typical accuracy is ±0.004 inches per inch (±0.1016 mm per 25.4 mm) of part dimension, suitable for true-to-CAD accuracy and functional testing.
The printer measures 1120 x 740 x 1070 mm and weighs 211 kg. It operates on electrical requirements of 200-240 VAC, 50/60 Hz, 10A, single-phase power. The unit is equipped with a dark transparent window panel on the upper section and shows minor surface scratches and scuffs consistent with typical use, but overall appears well maintained.
Included with the printer are multiple materials and accessories to support ongoing operation and post-processing: one M2 ENT flexible material cartridge (expiration 07/2025), one M2S-HT250 high temperature resistant material cartridge (expiration 05/2025), four MCO Cleaner cleaning solution containers (expiration 03/2025) for material changes, two M2 SUP support material cartridges (expiration 01/2026), and two build plates. Also included is the full 3D Systems EasyClean post-processing equipment.
Additional visible components include several stainless steel perforated trays and containers with lids, which appear clean and well maintained, aiding in material handling and post-processing.
The printer interface displays usage statistics including a total print time of 2132 hours and various material quantities, reflecting active but moderate use. Firmware and software versions are current as of May 2023. This machine is located in Zurich, Switzerland.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used 3DS Projet MJP 2500 Plus with materials and accessories included (see below). Very good condition. 2132 printing hours.
New print-heads installed in April 2023. Machine visible in Zurich, Switzerland.
• Build Capacity: (WxDxH): 294 x 211 x 144 mm (11.6 x 8.3 x 5.6 in)
• Resolution: 1600 x 900 x 790 DPI (UHD mode), 32 µm layer thickness
• Typical Accuracy: ±0.004 in per in (±0.1016 mm per 25.4 mm) of part dimension.
• Electrical requirements: 200-240 VAC, 50/60 Hz, 10A, single-phase
• Weight: 211 kg
• Printer dimensions: 1120 x 740 x 1070 mm (44.1 x 29.1 x 42.1 in)
Included:
- x1 M2 ENT (exp 07/2025) - flexible material
- x1 M2S-HT250 (exp 05/2025) - high temperature resistant material
- x4 MCO Cleaner (exp 03/2025) - cleaning solution for material change
- x2 M2 SUP (exp 01/2026) - support material
- x2 Build plates
- Full 3D Systems EasyClean equipment for post-processing
General description:
Print precision rigid and elastomeric parts with true-to-CAD accuracy, superior surface finish and high-quality edge fidelity for true functional testing. Capable of printing in Ultra High Definition mode, the ProJet MJP 2500 Plus makes it possible to print small features down to 300 µm or finer.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the condition of this 3D Systems Projet MJP2500 Plus?
This 3D Systems Projet MJP2500 Plus is in very good condition.
How many hours has this 3D Systems Projet MJP2500 Plus been used?
This 3D Systems Projet MJP2500 Plus has a total printing time of 2132 hours.
When were the print heads last replaced on this 3D Systems Projet MJP2500 Plus?
This 3D Systems Projet MJP2500 Plus had print heads replaced in April 2023.
Is this 3D Systems Projet MJP2500 Plus compatible with wax?
This 3D Systems Projet MJP2500 Plus is not compatible with wax.
What type of resin is this 3D Systems Projet MJP2500 Plus used with?
This 3D Systems Projet MJP2500 Plus is used with plastic and elastomeric type of resin.
Is this 3D Systems Projet MJP2500 Plus currently operational?
This 3D Systems Projet MJP2500 Plus has been purged and is currently shut off.
How does this 3D Systems Projet MJP2500 Plus perform in production speed?
This 3D Systems Projet MJP2500 Plus can produce parts in a very fast and precise way.
Can this 3D Systems Projet MJP2500 Plus be tested with sample parts?
This 3D Systems Projet MJP2500 Plus is available for testing with printed parts in stock as samples.
What is the total printing time of this printer?
This printer has a total printing time of 2132 hours.
When were the print heads of this printer replaced?
This printer's print heads were replaced in April 2023.
What is the condition of this printer?
This printer is overall in good condition.
Is this printer compatible with wax?
This printer is not compatible with wax.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Oct. 28, 2026 |
Used 3DS Projet MJP 2500 Plus with materials and accessories included (see below). Very good condition. 2132 printing hours.
New print-heads installed in April 2023. Machine visible in Zurich, Switzerland.
• Build Capacity: (WxDxH): 294 x 211 x 144 mm (11.6 x 8.3 x 5.6 in)
• Resolution: 1600 x 900 x 790 DPI (UHD mode), 32 µm layer thickness
• Typical Accuracy: ±0.004 in per in (±0.1016 mm per 25.4 mm) of part dimension.
• Electrical requirements: 200-240 VAC, 50/60 Hz, 10A, single-phase
• Weight: 211 kg
• Printer dimensions: 1120 x 740 x 1070 mm (44.1 x 29.1 x 42.1 in)
Included:
- x1 M2 ENT (exp 07/2025) - flexible material
- x1 M2S-HT250 (exp 05/2025) - high temperature resistant material
- x4 MCO Cleaner (exp 03/2025) - cleaning solution for material change
- x2 M2 SUP (exp 01/2026) - support material
- x2 Build plates
- Full 3D Systems EasyClean equipment for post-processing
General description:
Print precision rigid and elastomeric parts with true-to-CAD accuracy, superior surface finish and high-quality edge fidelity for true functional testing. Capable of printing in Ultra High Definition mode, the ProJet MJP 2500 Plus makes it possible to print small features down to 300 µm or finer.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the condition of this 3D Systems Projet MJP2500 Plus?
This 3D Systems Projet MJP2500 Plus is in very good condition.
How many hours has this 3D Systems Projet MJP2500 Plus been used?
This 3D Systems Projet MJP2500 Plus has a total printing time of 2132 hours.
When were the print heads last replaced on this 3D Systems Projet MJP2500 Plus?
This 3D Systems Projet MJP2500 Plus had print heads replaced in April 2023.
Is this 3D Systems Projet MJP2500 Plus compatible with wax?
This 3D Systems Projet MJP2500 Plus is not compatible with wax.
What type of resin is this 3D Systems Projet MJP2500 Plus used with?
This 3D Systems Projet MJP2500 Plus is used with plastic and elastomeric type of resin.
Is this 3D Systems Projet MJP2500 Plus currently operational?
This 3D Systems Projet MJP2500 Plus has been purged and is currently shut off.
How does this 3D Systems Projet MJP2500 Plus perform in production speed?
This 3D Systems Projet MJP2500 Plus can produce parts in a very fast and precise way.
Can this 3D Systems Projet MJP2500 Plus be tested with sample parts?
This 3D Systems Projet MJP2500 Plus is available for testing with printed parts in stock as samples.
What is the total printing time of this printer?
This printer has a total printing time of 2132 hours.
When were the print heads of this printer replaced?
This printer's print heads were replaced in April 2023.
What is the condition of this printer?
This printer is overall in good condition.
Is this printer compatible with wax?
This printer is not compatible with wax.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing is for a 2018 3D Systems ProJet MJP 2500 Plus 3D printer, a professional-grade additive manufacturing system using Selective Laser Sintering (SLS) / Multi Jet Fusion (MJF) printing technology. The printer offers a build volume of 294 x 211 x 144 mm (length x width x height), allowing for the creation of precise and detailed parts. It features a high resolution of 1600 x 900 x 790 DPI in Ultra High Definition mode with a layer thickness of 32 microns, enabling fine details down to 300 microns or finer. Typical accuracy is ±0.004 inches per inch (±0.1016 mm per 25.4 mm) of part dimension, suitable for true-to-CAD accuracy and functional testing.
The printer measures 1120 x 740 x 1070 mm and weighs 211 kg. It operates on electrical requirements of 200-240 VAC, 50/60 Hz, 10A, single-phase power. The unit is equipped with a dark transparent window panel on the upper section and shows minor surface scratches and scuffs consistent with typical use, but overall appears well maintained.
Included with the printer are multiple materials and accessories to support ongoing operation and post-processing: one M2 ENT flexible material cartridge (expiration 07/2025), one M2S-HT250 high temperature resistant material cartridge (expiration 05/2025), four MCO Cleaner cleaning solution containers (expiration 03/2025) for material changes, two M2 SUP support material cartridges (expiration 01/2026), and two build plates. Also included is the full 3D Systems EasyClean post-processing equipment.
Additional visible components include several stainless steel perforated trays and containers with lids, which appear clean and well maintained, aiding in material handling and post-processing.
The printer interface displays usage statistics including a total print time of 2132 hours and various material quantities, reflecting active but moderate use. Firmware and software versions are current as of May 2023. This machine is located in Zurich, Switzerland.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Oct. 28, 2026 |
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D sustavi Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
"3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
Sistemas 3D Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D sistemi Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
3D Systems Projet MJP2500 Plus
EN
- Languages
English (GB)