Contact us to receive an offer.
| Manufacturer | 2 Spindles for D180 |
|---|---|
| Model | + NO. 2 STRETCHERS D180 |
| Year | |
| Location | Italy
|
This listing features a comprehensive set of components designed for use with the D180 spindle system, including spindles, stretchers, snouts, and coupler sets. The No. 2 rectangular dinghies measure 440x420 and are constructed from spheroidal cast iron that has been hardened and ground for durability and precision. They come complete with side closure covers.
The No. 2 spindles for the D180 are made from steel that has been case-hardened and ground. Each spindle includes front and rear bushes designed to facilitate the sliding of the coffin. Both the outer and inner diameters are provided with oversize dimensions to allow finishing that ensures proper union with the stretcher and sleeve.
The No. 2 stretchers for the D180 are manufactured from nitrided and ground steel. They are equipped with a rear bushing that serves as a guide for the tool tie rod. Similar to the spindles, their outer and inner diameters are oversize to allow finishing for integration with the spindle union.
The No. 2 snouts shown for the D180 are made of case-hardened and ground steel. These snouts are prepared to fit an ISO 50 DIN 69872 cone and include internal coolant channels. Their outer diameters are also oversized to accommodate finishing for union with the boring bar or spindle.
Additionally, the package includes No. 2 jag/contour coupler sets designed for use with the spindles and stretchers. These couplers are made from hardened and tempered steel.
To complete the supply, the seller can provide all technical documentation related to the head, including detailed drawings of mechanical and hydraulic assemblies referenced by assembly D15230010. The equipment features a stroke sleeve of 1200 mm, a barrel stroke of 1000 mm, and a gearbox with three ranges.
This set is suitable for buyers seeking detailed mechanical components compatible with the D180 spindle system, offering materials and design features aimed at precision and durability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
No. 2 rectangular dinghies size 440x420
Material Spheroidal cast iron hardened and ground
Complete with side closure covers
No. 2 Spindles for D180
Material Steel case-hardened and ground
Complete with front and rear bush for sliding the coffin
Outer and inner diameters with oversize for finishing in union with stretcher and sleeve
NO. 2 STRETCHERS D180
Material Nitrided and ground steel
Complete with rear bushing for tool tie rod guide
Outer and inner diameters with oversize for finishing in spindle union
NO. 2 SNOUTS SHOWN D180
Material Case-hardened and ground steel
Prepared for ISO 50 DIN 69872 cone with internal coolant
Outer diameters with oversize for finishing in union with boring bar/spindle
No. 2 JAG/CONTOUR COUPLER SETS for spindles and stretchers
Material hardened and tempered steel
To complete the supply, the seller can include all technical documentation inherent to the HEAD complete with all drawings of mechanical and hydraulic assemblies (see attached assembly D15230010)
Stroke sleeve 1200 mm
Barrel stroke 1000 mm
Gearbox 3 ranges
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | July 20, 2026 |
No. 2 rectangular dinghies size 440x420
Material Spheroidal cast iron hardened and ground
Complete with side closure covers
No. 2 Spindles for D180
Material Steel case-hardened and ground
Complete with front and rear bush for sliding the coffin
Outer and inner diameters with oversize for finishing in union with stretcher and sleeve
NO. 2 STRETCHERS D180
Material Nitrided and ground steel
Complete with rear bushing for tool tie rod guide
Outer and inner diameters with oversize for finishing in spindle union
NO. 2 SNOUTS SHOWN D180
Material Case-hardened and ground steel
Prepared for ISO 50 DIN 69872 cone with internal coolant
Outer diameters with oversize for finishing in union with boring bar/spindle
No. 2 JAG/CONTOUR COUPLER SETS for spindles and stretchers
Material hardened and tempered steel
To complete the supply, the seller can include all technical documentation inherent to the HEAD complete with all drawings of mechanical and hydraulic assemblies (see attached assembly D15230010)
Stroke sleeve 1200 mm
Barrel stroke 1000 mm
Gearbox 3 ranges
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a comprehensive set of components designed for use with the D180 spindle system, including spindles, stretchers, snouts, and coupler sets. The No. 2 rectangular dinghies measure 440x420 and are constructed from spheroidal cast iron that has been hardened and ground for durability and precision. They come complete with side closure covers.
The No. 2 spindles for the D180 are made from steel that has been case-hardened and ground. Each spindle includes front and rear bushes designed to facilitate the sliding of the coffin. Both the outer and inner diameters are provided with oversize dimensions to allow finishing that ensures proper union with the stretcher and sleeve.
The No. 2 stretchers for the D180 are manufactured from nitrided and ground steel. They are equipped with a rear bushing that serves as a guide for the tool tie rod. Similar to the spindles, their outer and inner diameters are oversize to allow finishing for integration with the spindle union.
The No. 2 snouts shown for the D180 are made of case-hardened and ground steel. These snouts are prepared to fit an ISO 50 DIN 69872 cone and include internal coolant channels. Their outer diameters are also oversized to accommodate finishing for union with the boring bar or spindle.
Additionally, the package includes No. 2 jag/contour coupler sets designed for use with the spindles and stretchers. These couplers are made from hardened and tempered steel.
To complete the supply, the seller can provide all technical documentation related to the head, including detailed drawings of mechanical and hydraulic assemblies referenced by assembly D15230010. The equipment features a stroke sleeve of 1200 mm, a barrel stroke of 1000 mm, and a gearbox with three ranges.
This set is suitable for buyers seeking detailed mechanical components compatible with the D180 spindle system, offering materials and design features aimed at precision and durability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | July 20, 2026 |
2 групи DRAIN-MANDRIN-BARN D180
2 skupiny DRAIN-MANDRIN-BARN D180
2 DRAIN-MANDRIN-BARN D180 grupper
2 Gruppen DRAIN-MANDRIN-BARN D180
2 ομάδες DRAIN-MANDRIN-BARN D180
2 groups CANOTTO-MANDRINO-BARENO D180
2 grupos DRAIN-MANDRIN-BARN D180
2 groupes DRAIN-MANDRIN-BARN D180
2 grupe: ČAHA-STEZNA GLAVICA-PROVRTNA ŠIPKA D180
2 DRAIN-MANDRIN-BARN D180 csoport
2 gruppi CANOTTO-MANDRINO-BARENO D180
2 DRAIN-MANDRIN-BARN D180 grupės
2 groepen DRAIN-MANDRIN-BARN D180
2 grupy DRAIN-MANDRIN-BARN D180
2 grupos DRAIN-MANDRIN-BARN D180
2 Grupuri DRAIN-MANDRIN-BARN D180
2 группы DRAIN-MANDRIN-BARN D180
2 grupe: ČAURA-STEZNA MEĐUVICA-ŠIBICA ZA BUŠTINU D180
2 Avlopp-MANDRIN-BARN D180 grupper
2 DRAIN-MANDRIN-BARN D180 grupları
EN
- Languages
English (GB)