| Manufacturer | ZMM |
|---|---|
| Model | C 400 TM |
| Year | 2020 |
| Location | Austria
|
| Category | Lathes - Parallel lathes (0 - 3000 mm) |
| Spindle nose | |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| Length x width x height | 2750.0 × 1100.0 × 1600.0 |
| Weight | 1540 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 23/09/2026 |
| Product id | P260331518 |
| Language |
струг ZMM C 400 TM
soustruh ZMM C 400 TM
ZMM C 400 TM drejebænk
Spitzendrehmaschine ZMM C 400 TM
Τόρνος ZMM C 400 TM
ZMM C 400 TM lathe
Torno ZMM C 400 TM
Tour ZMM C 400 TM
tokarski stroj ZMM C 400 TM
ZMM C 400 TM esztergagép
Tornio ZMM C 400 TM
ZMM C 400 TM tekinimo staklės
ZMM C 400 TM draaibank
Tokarka ZMM C 400 TM
Torno ZMM C 400 TM
Strung ZMM C 400 TM
ZMM C 400 TM Токарный станок с ЧПУ
strug ZMM C 400 TM
ZMM C 400 TM svarv
torna ZMM C 400 TM
|
Manufacturer: ZMM
Model: C 400 TM
Year of Manufacture: 2020
Technical Condition: As-is, where-is
Specifications:
Swing Over Bed: 400 mm
Distance Between Centers: 1000 mm
Centre Height: 200 mm
Spindle Bore: 52 mm
Swing Over Cross Slide: 235 mm
Width of Bed: 320 mm
Spindle Nose / DIN 55027: 6
Spindle Taper: 6 M
Spindle Speed Steps: 12
Spindle Revs: 50–2,240 rpm
Number of Feeds: 80
Longitudinal Feed Range: 0.015 - 0.6 mm/r
Cross Feed Range: 0.0075 - 0.3 mm/r
Number of Threads: 40
Metric Thread Range: 0.25 - 7.5 mm
Inch Thread Range: 120 - 4 Tpi
Module Thread Range: 0.0625 - 1.875 DP Thread Range: Array
Cross Slide Travel: 235 mm
Top Slide Travel: 110 mm
Tailstock Quill Diameter: 50 mm
Tailstock Quill Taper: 4 MK
Tailstock Travel: 100 mm
Motor Power: 4 kW
Dimensions and Weight:
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Description:
This CNC lathe has been utilized in our workshop primarily for repair work, resulting in minimal usage to date. It features a manual transmission and is equipped with a 3-axes digital readout (Fagor 40i). The machine includes a quick change toolpost (Multifix Type B) with 4 holders (3 square, 1 round), a 3-jaw chuck (Bison 3204/DIN6350, Ø 200 mm spindle nose Nr. 6 DIN 55027), and a four-way rapid traverse device. Additional features include a spindle dead center, coolant equipment, a flange plate for the lathe chuck (Ø 200 mm), an adapter sleeve, full-length rear splash guard, leadscrew and shaft protection, safety guard for the chuck, toolholder guard, leveling bolts and plates, quick release tailstock, low voltage machine lamp, and an operating manual. The machine complies with "CE" standards.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 37 |
| Last activity | Oct. 31, 2026 |
Trust in Hesse + Co’s more than 75 years of experience! Hesse + Co is not only your reliable partner for new and used sheet metal working machines and tools, but is also happy to assist you with services such as repairs, maintenance, safety inspections, spare parts supply for new and used machines, as well as commissioning, machine relocations, and retrofit conversions.
In Hesse + Co’s 2,000 m² showroom in Wiener Neudorf, just 20 minutes from Vienna International Airport, more than 300 new and used sheet metal and machine tools working machines are always available for viewing. Trained service technicians are happy to demonstrate any of the machines at any time.
Hesse + Co places great emphasis on customer satisfaction and offers not only high-quality machines but also excellent customer service. The experienced team supports customers throughout the entire purchasing process and provides training, maintenance services, and technical support to ensure that the machines always operate at peak performance.
Manufacturer: ZMM
Model: C 400 TM
Year of Manufacture: 2020
Technical Condition: As-is, where-is
Specifications:
Swing Over Bed: 400 mm
Distance Between Centers: 1000 mm
Centre Height: 200 mm
Spindle Bore: 52 mm
Swing Over Cross Slide: 235 mm
Width of Bed: 320 mm
Spindle Nose / DIN 55027: 6
Spindle Taper: 6 M
Spindle Speed Steps: 12
Spindle Revs: 50–2,240 rpm
Number of Feeds: 80
Longitudinal Feed Range: 0.015 - 0.6 mm/r
Cross Feed Range: 0.0075 - 0.3 mm/r
Number of Threads: 40
Metric Thread Range: 0.25 - 7.5 mm
Inch Thread Range: 120 - 4 Tpi
Module Thread Range: 0.0625 - 1.875 DP Thread Range: Array
Cross Slide Travel: 235 mm
Top Slide Travel: 110 mm
Tailstock Quill Diameter: 50 mm
Tailstock Quill Taper: 4 MK
Tailstock Travel: 100 mm
Motor Power: 4 kW
Dimensions and Weight:
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Description:
This CNC lathe has been utilized in our workshop primarily for repair work, resulting in minimal usage to date. It features a manual transmission and is equipped with a 3-axes digital readout (Fagor 40i). The machine includes a quick change toolpost (Multifix Type B) with 4 holders (3 square, 1 round), a 3-jaw chuck (Bison 3204/DIN6350, Ø 200 mm spindle nose Nr. 6 DIN 55027), and a four-way rapid traverse device. Additional features include a spindle dead center, coolant equipment, a flange plate for the lathe chuck (Ø 200 mm), an adapter sleeve, full-length rear splash guard, leadscrew and shaft protection, safety guard for the chuck, toolholder guard, leveling bolts and plates, quick release tailstock, low voltage machine lamp, and an operating manual. The machine complies with "CE" standards.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Lathes - Parallel lathes (0 - 3000 mm) |
| Spindle nose | |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| Length x width x height | 2750.0 × 1100.0 × 1600.0 |
| Weight | 1540 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 23/09/2026 |
| Product id | P260331518 |
| Language |
струг ZMM C 400 TM
soustruh ZMM C 400 TM
ZMM C 400 TM drejebænk
Spitzendrehmaschine ZMM C 400 TM
Τόρνος ZMM C 400 TM
ZMM C 400 TM lathe
Torno ZMM C 400 TM
Tour ZMM C 400 TM
tokarski stroj ZMM C 400 TM
ZMM C 400 TM esztergagép
Tornio ZMM C 400 TM
ZMM C 400 TM tekinimo staklės
ZMM C 400 TM draaibank
Tokarka ZMM C 400 TM
Torno ZMM C 400 TM
Strung ZMM C 400 TM
ZMM C 400 TM Токарный станок с ЧПУ
strug ZMM C 400 TM
ZMM C 400 TM svarv
torna ZMM C 400 TM
|
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 37 |
| Last activity | Oct. 31, 2026 |
Trust in Hesse + Co’s more than 75 years of experience! Hesse + Co is not only your reliable partner for new and used sheet metal working machines and tools, but is also happy to assist you with services such as repairs, maintenance, safety inspections, spare parts supply for new and used machines, as well as commissioning, machine relocations, and retrofit conversions.
In Hesse + Co’s 2,000 m² showroom in Wiener Neudorf, just 20 minutes from Vienna International Airport, more than 300 new and used sheet metal and machine tools working machines are always available for viewing. Trained service technicians are happy to demonstrate any of the machines at any time.
Hesse + Co places great emphasis on customer satisfaction and offers not only high-quality machines but also excellent customer service. The experienced team supports customers throughout the entire purchasing process and provides training, maintenance services, and technical support to ensure that the machines always operate at peak performance.
EN
- Languages
English (GB)