Contact us to receive an offer.
| Category | Blowmoulding machines |
| Volume | 0.5 L |
| Extruder diameter | 70 mm |
| Outputs/hours | 2000 |
| Nbr of heads | 8 |
| Nbr of stations | 8 |
| Weight | 13000 kg |
| worked hours | |
| hours under power | 48000 hours |
| state | excellent |
| At local norms | yes |
| status | visible but unplugged |
| Last availability date | 06/11/2026 |
| Product id | P250622024 |
| Language |
This injection blow moulding machine, model IBM 500/1350, is manufactured by ZHONGYA MACHINERY CO, LTD and was produced in 2012. It is designed for producing preforms from materials such as PE, PP, PS, and PETG, with a maximum product volume of up to 500 ml. The machine features 8 stations and 8 heads, facilitating multi-cavity production to enhance output efficiency.
The extruder screw diameter is 70 mm, allowing a maximum injection volume of 500 cm³. The injection mold clamping force reaches up to 1250 kN, while the blow mold clamping force is 200 kN. It supports a maximum product diameter of 100 mm and product length up to 200 mm. The machine operates with a motor power of 80 kW at 380 volts and 50 Hz frequency, with a hydraulic system pressure of 14 MPa.
Weighing approximately 13,000 kg, the machine is equipped with a front transparent safety door that provides access to the interior, and a control panel located on the right side for operational management. A blue metal staircase is attached to the machine, offering convenient access to elevated sections. The moulding section shows multiple cavities and injection nozzles, appearing clean and well-maintained with minor signs of wear consistent with normal use. The machine exterior is intact with no visible damage.
Additional details include a metal nameplate displaying technical specifications and manufacturer information. The machine includes an instruction book and CE marking on the plate. Please note the machine is currently stopped. A video demonstrating its operation is available upon request.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
PE, PP, PS, PS, PETG etc. preform blow moulding machine up to 500 ml, 8 cavities.
Screw diameter 70 mm
Max. injection volume 500 cm³
Injection mold clamping force 1250 kN
Clamping force of blow mold 200 kN
Maximum product diameter 100 mm
Maximum product length 200 mm
Motor power 80 kw. 380 volts III 50 Hz.
Hydraulic pressure 14 MPpa
Machine weight 13.000 kgs.
Instruction book. CE only on the plate.
Machine stopped, there is video of operation.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the ZHONGYA MACHINERY CO, LTD IBM 500/1350?
This ZHONGYA MACHINERY CO, LTD IBM 500/1350 is a blow molding machine for preforms made of PE, PP, and PETG.
What is the capacity of this blow molding machine?
This blow molding machine has a capacity of 500 ml.
When was this equipment manufactured?
This equipment was manufactured in 2012.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 18 |
| Last activity | Nov. 14, 2026 |
PE, PP, PS, PS, PETG etc. preform blow moulding machine up to 500 ml, 8 cavities.
Screw diameter 70 mm
Max. injection volume 500 cm³
Injection mold clamping force 1250 kN
Clamping force of blow mold 200 kN
Maximum product diameter 100 mm
Maximum product length 200 mm
Motor power 80 kw. 380 volts III 50 Hz.
Hydraulic pressure 14 MPpa
Machine weight 13.000 kgs.
Instruction book. CE only on the plate.
Machine stopped, there is video of operation.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the ZHONGYA MACHINERY CO, LTD IBM 500/1350?
This ZHONGYA MACHINERY CO, LTD IBM 500/1350 is a blow molding machine for preforms made of PE, PP, and PETG.
What is the capacity of this blow molding machine?
This blow molding machine has a capacity of 500 ml.
When was this equipment manufactured?
This equipment was manufactured in 2012.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Blowmoulding machines |
| Volume | 0.5 L |
| Extruder diameter | 70 mm |
| Outputs/hours | 2000 |
| Nbr of heads | 8 |
| Nbr of stations | 8 |
| Weight | 13000 kg |
| worked hours | |
| hours under power | 48000 hours |
| state | excellent |
| At local norms | yes |
| status | visible but unplugged |
| Last availability date | 06/11/2026 |
| Product id | P250622024 |
| Language |
This injection blow moulding machine, model IBM 500/1350, is manufactured by ZHONGYA MACHINERY CO, LTD and was produced in 2012. It is designed for producing preforms from materials such as PE, PP, PS, and PETG, with a maximum product volume of up to 500 ml. The machine features 8 stations and 8 heads, facilitating multi-cavity production to enhance output efficiency.
The extruder screw diameter is 70 mm, allowing a maximum injection volume of 500 cm³. The injection mold clamping force reaches up to 1250 kN, while the blow mold clamping force is 200 kN. It supports a maximum product diameter of 100 mm and product length up to 200 mm. The machine operates with a motor power of 80 kW at 380 volts and 50 Hz frequency, with a hydraulic system pressure of 14 MPa.
Weighing approximately 13,000 kg, the machine is equipped with a front transparent safety door that provides access to the interior, and a control panel located on the right side for operational management. A blue metal staircase is attached to the machine, offering convenient access to elevated sections. The moulding section shows multiple cavities and injection nozzles, appearing clean and well-maintained with minor signs of wear consistent with normal use. The machine exterior is intact with no visible damage.
Additional details include a metal nameplate displaying technical specifications and manufacturer information. The machine includes an instruction book and CE marking on the plate. Please note the machine is currently stopped. A video demonstrating its operation is available upon request.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 18 |
| Last activity | Nov. 14, 2026 |