| Manufacturer | Yousung Machinery Co.Korea |
|---|---|
| Model | SLITTER |
| Year | 2002 |
| Location | South Korea
|
USED SLITTING / CUT-TO-LENGTH LINE
Brief description:
The offered cutting line is a used industrial installation designed for unpacking, leveling, and cutting roll materials to specified widths and lengths. The line includes main modules for unwinding, tension control, leveling, cutting, rewinding, and output handling, as well as electrical/hydraulic units and a control panel.
Composition and main modules:
- Roll trolley (infeed) and outfeed roll trolley
- Drum supports (infeed and outfeed)
- Unwinder
- Tension roller, opener, gripper, and leveler
- Drive unit for leveler
- Infeed shears, gripper roller, and side guide
- Cutting machine with drive unit and motor for the cutting device
- Waste rewind reels
- Roller table
- Infeed and outfeed lower contours with chain and separator
- Tension pad, gripper roller, and deflector
- Drive unit for gripper roller and table guide
- Separator for rewinder and the rewinder itself
- Drive unit for rewinder
- Outfeed hydraulic unit
- Operators: infeed OP, main OP, outfeed OP, and control panel
- Additional accessories: sleeve, segments, separator, stand for rubber rings, trolley, and knife box (1–6)
Technical specifications (according to provided data):
- Cutting device shaft diameter: 300 mm
- Inner diameter of roll: ø508 mm
- Maximum roll width: 1600 mm
- Maximum line speed: 80 m/min
- Material thickness range: from 1.2 mm to 9 mm
- Maximum roll weight: 20 tons
- Motors: cutting device DC 110 kW; rewinder DC 150 kW
- Year of manufacture / manufacturer: 2002 / Yousung Machinery Co., Korea
Notes:
The text describes the configuration and specifications as provided. For details about operational status, electrical conditions, additional accessories, or photos, please request further information from the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
USED SLITTER LINE
- Composition
Coil Skid - Entry Coil Car - Entry Drum Support - Uncoiler - Snubber Roll & Opener & Pinch & Leveler -
Drive Unit for Leveler Unit - Entry Shear & Pinch Roll & Side Guide - Slitter Stand - Drive Unit for Slitter Stand -
Motor for Slitter Stand - Scrap Winder - Roller Table - Entry Down Looper - Down Looper Chian -
Exit Down Looper & Separator - Tension Pad & Pinch Roll & Deflector - Drive Unit for Pinch Roll - Guide Table -
Recoiler Separator - Recoiler - Exit Drum Support - Exit Coil Car - Drive Unit for Recoiler - Exit HYD unit - Entry OP -
Main OP - Exit OP - Control Panel - Sleeve - Segment - Spacer & Rubber Rings Rack - Cart - Knives Box 1-6
- Specification
1) Slitter Arbor Diameter : 300 mm
2) Coil Inner Diameter : ø508 mm
3) Coil Width : Max 1,600 mm
4) Line Speed : Max 80 MPM
5) Thickness : Min 1.2mm - Max 9 mm
6) Coil Weight : Max 20 tons
7) Motor : Slitter: DC110kw / Recoiler: DC150kw
8) Year of Manufacture / Maker : 2002 / Yousung Machinery Co.Korea
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| slitting-lines-cut-to-length-lines-yousung-machinery-cokorea-slitter-p260818087_4.pdf | Download |
| slitting-lines-cut-to-length-lines-yousung-machinery-cokorea-slitter-p260818087_4.pdf | Download |
| slitting-lines-cut-to-length-lines-yousung-machinery-cokorea-slitter-p260818087_4.pdf | Download |
| slitting-lines-cut-to-length-lines-yousung-machinery-cokorea-slitter-p260818087_6.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Oct. 16, 2026 |
USED SLITTER LINE
- Composition
Coil Skid - Entry Coil Car - Entry Drum Support - Uncoiler - Snubber Roll & Opener & Pinch & Leveler -
Drive Unit for Leveler Unit - Entry Shear & Pinch Roll & Side Guide - Slitter Stand - Drive Unit for Slitter Stand -
Motor for Slitter Stand - Scrap Winder - Roller Table - Entry Down Looper - Down Looper Chian -
Exit Down Looper & Separator - Tension Pad & Pinch Roll & Deflector - Drive Unit for Pinch Roll - Guide Table -
Recoiler Separator - Recoiler - Exit Drum Support - Exit Coil Car - Drive Unit for Recoiler - Exit HYD unit - Entry OP -
Main OP - Exit OP - Control Panel - Sleeve - Segment - Spacer & Rubber Rings Rack - Cart - Knives Box 1-6
- Specification
1) Slitter Arbor Diameter : 300 mm
2) Coil Inner Diameter : ø508 mm
3) Coil Width : Max 1,600 mm
4) Line Speed : Max 80 MPM
5) Thickness : Min 1.2mm - Max 9 mm
6) Coil Weight : Max 20 tons
7) Motor : Slitter: DC110kw / Recoiler: DC150kw
8) Year of Manufacture / Maker : 2002 / Yousung Machinery Co.Korea
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
USED SLITTING / CUT-TO-LENGTH LINE
Brief description:
The offered cutting line is a used industrial installation designed for unpacking, leveling, and cutting roll materials to specified widths and lengths. The line includes main modules for unwinding, tension control, leveling, cutting, rewinding, and output handling, as well as electrical/hydraulic units and a control panel.
Composition and main modules:
- Roll trolley (infeed) and outfeed roll trolley
- Drum supports (infeed and outfeed)
- Unwinder
- Tension roller, opener, gripper, and leveler
- Drive unit for leveler
- Infeed shears, gripper roller, and side guide
- Cutting machine with drive unit and motor for the cutting device
- Waste rewind reels
- Roller table
- Infeed and outfeed lower contours with chain and separator
- Tension pad, gripper roller, and deflector
- Drive unit for gripper roller and table guide
- Separator for rewinder and the rewinder itself
- Drive unit for rewinder
- Outfeed hydraulic unit
- Operators: infeed OP, main OP, outfeed OP, and control panel
- Additional accessories: sleeve, segments, separator, stand for rubber rings, trolley, and knife box (1–6)
Technical specifications (according to provided data):
- Cutting device shaft diameter: 300 mm
- Inner diameter of roll: ø508 mm
- Maximum roll width: 1600 mm
- Maximum line speed: 80 m/min
- Material thickness range: from 1.2 mm to 9 mm
- Maximum roll weight: 20 tons
- Motors: cutting device DC 110 kW; rewinder DC 150 kW
- Year of manufacture / manufacturer: 2002 / Yousung Machinery Co., Korea
Notes:
The text describes the configuration and specifications as provided. For details about operational status, electrical conditions, additional accessories, or photos, please request further information from the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Oct. 16, 2026 |
Линия за рязане / линия за рязане по дължина Yousung Machinery Co.Korea SLITTER
Řezací linka / linka s podélným řezem Yousung Machinery Co.Korea SLITTER
Yousung Machinery Co.Korea SLITTER Opskæring line / Skær til længde linje
Yousung Machinery Co.Korea SLITTER Spaltanlage
Γραμμή κοπής / Γραμμή κοπής σε μήκος Yousung Machinery Co.Korea SLITTER
Yousung Machinery Co.Korea SLITTER Slitting line / Cut to length line
Línea de corte transversal Yousung Machinery Co.Korea SLITTER
Ligne de refendage Yousung Machinery Co.Korea SLITTER
Linija za rezanje / Linija za rezanje na duljinu Yousung Machinery Co.Korea SLITTER
Yousung Machinery Co.Korea SLITTER Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio Yousung Machinery Co.Korea SLITTER
Yousung Machinery Co.Korea SLITTER Pjaustymo linija / Iškirpti iki ilgio linijos
Yousung Machinery Co.Korea SLITTER Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm Yousung Machinery Co.Korea SLITTER
Linha de corte / Linha de corte no comprimento Yousung Machinery Co.Korea SLITTER
Linie de tăiere / Linie de tăiere la lungime Yousung Machinery Co.Korea SLITTER
Yousung Machinery Co.Korea SLITTER Линия продольной резки
Linija sečenja / linija sečenja na dužinu Yousung Machinery Co.Korea SLITTER
Yousung Machinery Co.Korea SLITTER Klipplina / Klipp till längdlinjen
Dilme hattı Yousung Machinery Co.Korea SLITTER
EN
- Languages
English (GB)