Contact us to receive an offer.
| Manufacturer | WMW |
|---|---|
| Model | ZFWZ 250 x 5A |
| Year | 1975 |
| Location | Germany
|
Manufacturer: WMW
Model: ZFWZ 250 x 5A
Year of Manufacture: 1975
This gear rolling machine is designed for the precise gearing of straight and helical spur gears, worm gears, and rollable profiles. It supports cycle milling, individual milling, as well as counter and synchronous milling operations.
Key specifications include a maximum wheel gear diameter of 145 mm and a tool holder compatible with MK4 tooling. The machine features a table size of 800 mm in length and 700 mm in width, with a clamping surface diameter of 300 mm. Table travel is 200 mm, and the milling carriage offers a swivel range of 210° and a travel distance of 350 mm. The feed mechanism allows adjustment in two directions with 16 steps ranging from 0.2 to 6.3 mm per revolution.
Machining capabilities for spur and worm gears include a maximum outside diameter of 250 mm when using the counterholder, maximum division of 5 mm, tooth bevel up to 45°, and tooth width limits of 200 mm for axial milling and 240 mm for radial-axial milling. The maximum milling width on the clamping table with counterholder is 655 mm. The axis distance between milling/clamping spindle and counterholder ranges from 30 to 240 mm.
Additional features include a rotating counter tip cone MK4 and a counterholder with guide bushings for both clamping and milling mandrels. The machine is equipped with a chip conveyor (ASTOS), a cooling water system, and operation is managed via a control panel. Various change wheels, milling arbors, and reducing bushings are included as accessories.
The machine's dimensions are approximately 2800 mm in length, 1500 mm in width, and 2300 mm in height, with a weight of around 4900 kg. The total power requirement is 7.5 kW.
Condition-wise, the machine exhibits signs of paint wear and chipping, particularly on the blue panels. Rust spots are visible near the front window panel. The machine is installed indoors in a factory environment. Visible components include the spindle, tool holder, mounted metal workpieces, hydraulic or pneumatic lines connected to machine parts, and a hand crank for manual adjustments. A window on the front panel allows viewing inside the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: WMW
Type: ZFWZ 250 x 5A
Year of construction: 1975
Tool holder: MK4
Tool diameter max.: Ø 145 mm
Table size: L: 800 x W: 700 mm
Clamping surface: Ø 300mm mm
Table travel: 200 mm
Total power requirement: 7.5 kW
Machine weight approx.: 4.9 t
Dimensions L x W x H: 2.8 x 1.5 x 2.3 m
Application: Gear rolling machine for gearing straight and helical spur gears, worm gears and rollable profiles
Cycle milling and individual milling as well as counter and synchronous milling
Information on machining spur and worm gears:
-Outside Ø max. 250mm with counterholder
-Division max. 5mm
-Tooth bevel max. 45°
-Tooth width max. Axial milling 200mm and radial-axial milling 240mm
-Milling width max. clamping table counterholder 655mm
Milling carriage:
-Swivel 210°
-travel distance 350mm
-Feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution
Other features:
-Counter tip cone MK4, rotating
-Axis distance of milling/clamping spindle with counterholder min./max.: 30 / 240mm
-Counterholder with guide bushings (clamping mandrel and milling mandrel)
Furnishing:
Chip conveyor ASTOS
Cooling water system
Operation via control panel
various change wheels
Accessories: i.D.
various milling arbors
various reducing bushings
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the WMW ZFWZ 250 x 5A?
This WMW ZFWZ 250 x 5A is a CNC gear hobbing machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 1975.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 3, 2026 |
Manufacturer: WMW
Type: ZFWZ 250 x 5A
Year of construction: 1975
Tool holder: MK4
Tool diameter max.: Ø 145 mm
Table size: L: 800 x W: 700 mm
Clamping surface: Ø 300mm mm
Table travel: 200 mm
Total power requirement: 7.5 kW
Machine weight approx.: 4.9 t
Dimensions L x W x H: 2.8 x 1.5 x 2.3 m
Application: Gear rolling machine for gearing straight and helical spur gears, worm gears and rollable profiles
Cycle milling and individual milling as well as counter and synchronous milling
Information on machining spur and worm gears:
-Outside Ø max. 250mm with counterholder
-Division max. 5mm
-Tooth bevel max. 45°
-Tooth width max. Axial milling 200mm and radial-axial milling 240mm
-Milling width max. clamping table counterholder 655mm
Milling carriage:
-Swivel 210°
-travel distance 350mm
-Feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution
Other features:
-Counter tip cone MK4, rotating
-Axis distance of milling/clamping spindle with counterholder min./max.: 30 / 240mm
-Counterholder with guide bushings (clamping mandrel and milling mandrel)
Furnishing:
Chip conveyor ASTOS
Cooling water system
Operation via control panel
various change wheels
Accessories: i.D.
various milling arbors
various reducing bushings
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the WMW ZFWZ 250 x 5A?
This WMW ZFWZ 250 x 5A is a CNC gear hobbing machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 1975.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: WMW
Model: ZFWZ 250 x 5A
Year of Manufacture: 1975
This gear rolling machine is designed for the precise gearing of straight and helical spur gears, worm gears, and rollable profiles. It supports cycle milling, individual milling, as well as counter and synchronous milling operations.
Key specifications include a maximum wheel gear diameter of 145 mm and a tool holder compatible with MK4 tooling. The machine features a table size of 800 mm in length and 700 mm in width, with a clamping surface diameter of 300 mm. Table travel is 200 mm, and the milling carriage offers a swivel range of 210° and a travel distance of 350 mm. The feed mechanism allows adjustment in two directions with 16 steps ranging from 0.2 to 6.3 mm per revolution.
Machining capabilities for spur and worm gears include a maximum outside diameter of 250 mm when using the counterholder, maximum division of 5 mm, tooth bevel up to 45°, and tooth width limits of 200 mm for axial milling and 240 mm for radial-axial milling. The maximum milling width on the clamping table with counterholder is 655 mm. The axis distance between milling/clamping spindle and counterholder ranges from 30 to 240 mm.
Additional features include a rotating counter tip cone MK4 and a counterholder with guide bushings for both clamping and milling mandrels. The machine is equipped with a chip conveyor (ASTOS), a cooling water system, and operation is managed via a control panel. Various change wheels, milling arbors, and reducing bushings are included as accessories.
The machine's dimensions are approximately 2800 mm in length, 1500 mm in width, and 2300 mm in height, with a weight of around 4900 kg. The total power requirement is 7.5 kW.
Condition-wise, the machine exhibits signs of paint wear and chipping, particularly on the blue panels. Rust spots are visible near the front window panel. The machine is installed indoors in a factory environment. Visible components include the spindle, tool holder, mounted metal workpieces, hydraulic or pneumatic lines connected to machine parts, and a hand crank for manual adjustments. A window on the front panel allows viewing inside the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 3, 2026 |
Cnc зъбофрезна машина WMW ZFWZ 250 x 5A
Odvalovací fréza na ozubení cnc WMW ZFWZ 250 x 5A
Cnc gear kogeplade maskine WMW ZFWZ 250 x 5A
WMW ZFWZ 250 x 5A CNC Zahnrad-Abwälzfräsmaschine
Μηχάνημα αφαίρεσης εργαλείων Cnc WMW ZFWZ 250 x 5A
WMW ZFWZ 250 x 5A Cnc gear hobbing machine
Talladora de engranaje cnc WMW ZFWZ 250 x 5A
Tailleuse d'engrenages cnc à la fraise-mère WMW ZFWZ 250 x 5A
Cnc stroj za brušenje zupčanika WMW ZFWZ 250 x 5A
WMW ZFWZ 250 x 5A Cnc fogaskerekes hobbing gép
Dentatrice a creatore con cnc WMW ZFWZ 250 x 5A
Cnc krumpliaračių pjovimo mašina WMW ZFWZ 250 x 5A
WMW ZFWZ 250 x 5A CNC-tandwielfreesmachine
Frezarka obwiedniowa CNC WMW ZFWZ 250 x 5A
Máquina fresadora de engrenagens CNC WMW ZFWZ 250 x 5A
Mașină de tăiat viteze CNC WMW ZFWZ 250 x 5A
WMW ZFWZ 250 x 5A Зубофрезерный станок с ЧПУ
Cnc mašina za brušenje zupčanika WMW ZFWZ 250 x 5A
WMW ZFWZ 250 x 5A Cnc gear hobbing maskin
CNC Dişli azdırma tezgahı WMW ZFWZ 250 x 5A
EN
- Languages
English (GB)