| Manufacturer | Wintek |
|---|---|
| Model | MSDU-M02.05 |
| Year | |
| Location | USA
|
Wintek MSDU-M02.05 Dehydration Unit
Manufacturer: Wintek
Model: MSDU-M02.05
This dehydration unit is designed for drying liquid phase alcohols or solvents using molecular sieve technology. It operates with steam regeneration and is configured for a 600-volt, 3-phase, 60Hz power supply.
Capacity:
- 2 gallons per minute
Included Equipment:
- 10HP vacuum pump
- 1HP transfer pump
System Description:
The unit processes a liquid stream of wet alcohol or solvent through columns packed with molecular sieve beads. These beads adsorb water molecules from the liquid due to polar attraction, enabling effective dehydration. The molecular sieve beads continue to adsorb water until saturation, at which point regeneration or replacement is necessary. This molecular sieve dehydration method can offer significant energy savings, potentially up to 50% compared to traditional distillation.
Physical and Functional Features:
The system is mounted on a skid and is fully wired and piped for integration. The machinery includes multiple stainless steel vertical cylindrical vessels connected by pipes and valves, with red valve handles visible on top of some vessels. A large control panel box labeled AAM Controls is present, featuring control buttons, gauges, and pressure meters mounted on the side of the equipment. A black cylindrical tank with pipe fittings is located near the control panel. The unit is situated in an industrial environment where visible dirt and wear are present on the equipment and surrounding floor area.
This description is based on the provided technical details and visible components, reflecting the unit's configuration and condition without assumptions about operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Wintek MSDU-M02.05 Dehydration Unit
Manufacturer: Wintek
Model: MSDU-M02.05
Technical Condition: As-is, where-is
Description:
This advanced dehydration unit is designed for drying liquid phase alcohols or solvents through molecular sieve dehydration. The system operates using steam regeneration and is configured for a power supply of 600 volts, 3 phase, 60Hz.
Capacity:
- 2 gallons per minute
Included Equipment:
- 10HP vacuum pump
- 1HP transfer pump
System Features:
- Complete system wired and piped
- Mounted on skid
Operational Overview:
The Liquid Phase MSDU design facilitates the passage of a liquid stream of wet alcohol or solvent through a column filled with molecular sieve beads. This process effectively adsorbs water molecules from the liquid due to polar attraction, allowing for efficient dehydration. The internal surfaces of the molecular sieve enhance the adsorption of water as the bulk liquid flows through the column. The process continues until the molecular sieves reach saturation, at which point regeneration or replacement of the sieves is required. This method of Molecular Sieve Dehydration (MSDU) can yield significant energy savings, potentially up to 50% compared to traditional distillation methods.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 57 |
| Last activity | Oct. 27, 2026 |
Solutions 4 Mfg (S4M) is a trusted industrial equipment partner helping manufacturers buy, sell, and maximize the value of machinery worldwide. With more than 50 years of combined industry expertise, the company specializes in serving the Biofuels, Renewable Energy, Edible Oils, and Process Industries.
Through its extensive global network and equipment database, S4M provides fast access to quality new and used machinery, helping clients reduce capital investment, shorten project timelines, and recover value from idle assets. From individual machines to complete production systems, the company delivers practical, cost effective solutions tailored to industrial needs.
Focused on speed, reliability, and return on investment, Solutions 4 Mfg helps manufacturers optimize resources, improve productivity, and make smarter equipment decisions.
Wintek MSDU-M02.05 Dehydration Unit
Manufacturer: Wintek
Model: MSDU-M02.05
Technical Condition: As-is, where-is
Description:
This advanced dehydration unit is designed for drying liquid phase alcohols or solvents through molecular sieve dehydration. The system operates using steam regeneration and is configured for a power supply of 600 volts, 3 phase, 60Hz.
Capacity:
- 2 gallons per minute
Included Equipment:
- 10HP vacuum pump
- 1HP transfer pump
System Features:
- Complete system wired and piped
- Mounted on skid
Operational Overview:
The Liquid Phase MSDU design facilitates the passage of a liquid stream of wet alcohol or solvent through a column filled with molecular sieve beads. This process effectively adsorbs water molecules from the liquid due to polar attraction, allowing for efficient dehydration. The internal surfaces of the molecular sieve enhance the adsorption of water as the bulk liquid flows through the column. The process continues until the molecular sieves reach saturation, at which point regeneration or replacement of the sieves is required. This method of Molecular Sieve Dehydration (MSDU) can yield significant energy savings, potentially up to 50% compared to traditional distillation methods.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Wintek MSDU-M02.05 Dehydration Unit
Manufacturer: Wintek
Model: MSDU-M02.05
This dehydration unit is designed for drying liquid phase alcohols or solvents using molecular sieve technology. It operates with steam regeneration and is configured for a 600-volt, 3-phase, 60Hz power supply.
Capacity:
- 2 gallons per minute
Included Equipment:
- 10HP vacuum pump
- 1HP transfer pump
System Description:
The unit processes a liquid stream of wet alcohol or solvent through columns packed with molecular sieve beads. These beads adsorb water molecules from the liquid due to polar attraction, enabling effective dehydration. The molecular sieve beads continue to adsorb water until saturation, at which point regeneration or replacement is necessary. This molecular sieve dehydration method can offer significant energy savings, potentially up to 50% compared to traditional distillation.
Physical and Functional Features:
The system is mounted on a skid and is fully wired and piped for integration. The machinery includes multiple stainless steel vertical cylindrical vessels connected by pipes and valves, with red valve handles visible on top of some vessels. A large control panel box labeled AAM Controls is present, featuring control buttons, gauges, and pressure meters mounted on the side of the equipment. A black cylindrical tank with pipe fittings is located near the control panel. The unit is situated in an industrial environment where visible dirt and wear are present on the equipment and surrounding floor area.
This description is based on the provided technical details and visible components, reflecting the unit's configuration and condition without assumptions about operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 57 |
| Last activity | Oct. 27, 2026 |
Solutions 4 Mfg (S4M) is a trusted industrial equipment partner helping manufacturers buy, sell, and maximize the value of machinery worldwide. With more than 50 years of combined industry expertise, the company specializes in serving the Biofuels, Renewable Energy, Edible Oils, and Process Industries.
Through its extensive global network and equipment database, S4M provides fast access to quality new and used machinery, helping clients reduce capital investment, shorten project timelines, and recover value from idle assets. From individual machines to complete production systems, the company delivers practical, cost effective solutions tailored to industrial needs.
Focused on speed, reliability, and return on investment, Solutions 4 Mfg helps manufacturers optimize resources, improve productivity, and make smarter equipment decisions.
Wintek MSDU-M02.05 Апарат за дехидратация
Wintek MSDU-M02.05 Dehydratační jednotka
Wintek MSDU-M02.05 Dehydreringsenhed
Wintek MSDU-M02.05 Dehydrierungseinheit
Wintek MSDU-M02.05 Μονάδα αφυδάτωσης
Wintek MSDU-M02.05 Dehydration unit
Wintek MSDU-M02.05 Unidad de deshidratación
Wintek MSDU-M02.05 Unité de déshydratation
Wintek MSDU-M02.05 Jedinica za dehidraciju
Wintek MSDU-M02.05 Dehidratáló egység
Wintek MSDU-M02.05 Unità di disidratazione
"Wintek" MSDU-M02.05 Dehidratacijos įrenginys
Wintek MSDU-M02.05 Ontwateringseenheid
Wintek MSDU-M02.05 Jednostka odwadniająca
Wintek MSDU-M02.05 Unidade de desidratação
Wintek MSDU-M02.05 Unitate de deshidratare
Wintek MSDU-M02.05 Блок обезвоживания
Wintek MSDU-M02.05 Jedinica za dehidrataciju
Wintek MSDU-M02.05 Enhet för uttorkning
Wintek MSDU-M02.05 Dehidrasyon ünitesi
EN
- Languages
English (GB)