| Manufacturer | Weiss |
|---|---|
| Model | WKS 1-8 |
| Year | 1996 |
| Location | United Kingdom
|
Weiss WKS 1-8 single-head capper suitable for screw or push-on caps. Currently set up for a 48 mm diameter x 18 mm high push-on cap and for bottles up to 145 mm tall. Rated speeds of up to 50 caps per minute (dependent on cap and bottle sizes). Key operating features:
- Pneumatic gating system to hold bottles under the capping head
- Pneumatic and laser gating systems to count bottles through the machine
- Through-conveyor width: 80 mm
- Inbuilt cap sorter bowl
- Moeller PLC control
- Electrical supply: 415 V, 3-phase, 16 A
- Air supply: 5 bar
- CE marked
- Operation manual included
Parts available (as listed):
- Full set of change parts for a 40 mm diameter x 10 mm cap (cap parts listed below): centrifugal start wheel, bowl escapement, chute, cap escapement and push-on chuck with suction cup
- Rear bottle holders (6): 2 × 40 mm, 2 × 200 mm, 1 × 75/120 mm, 1 × 125/175 mm
- Bowl escapements (6): 49 mm (fitted), 63 mm, 63 mm, 53 mm, 58 mm, 48 mm
- Cap escapements (7): 49 × 18 mm (fitted), 49 × 18 mm, 72 × 23 mm, 72 × 23 mm, 51 × 14 mm, 39 × 25 mm, 46 × 25 mm
- Chucks (6): 1 × 50 mm diameter click-lock, 1 × 40 mm diameter click-lock, 1 × 65 mm diameter push-on (with suction cup, no shaft), 1 × 40 mm diameter push-on (with suction cup, fitted), 1 × 65 mm diameter push-on (no suction cup), 1 × 55 mm diameter push-on (no suction cup)
- 2 mounting brackets, various identical threaded bars, 4 clamps, 60 mm cap slide
Machine footprint and weight: 2250 mm × 1000 mm × 2200 mm (H); weight listed as 400 kg.
Note: All specifications and parts listed are taken from the supplied product information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Weiss model WKS 1-8 Single Head Screw or Push on Capper
Currently set up for a 48mm diameter x 18mm high push on cap and a 145mm tall bottle
Key Information:
Speeds of up to 50 per minute depending cap and bottle sizes
Pneumatic gating system to hold bottles directly under the capping head
Pneumatic and laser gating systems to count bottles through
Through conveyor 80mm wide
Inbuilt cap sorter bowl
Moeller PLC
Electrical supply 415V 3ph 16A
5 bar air supply
CE marked
Operation manual included
Parts Available:
Full set of change parts for a 40mm diameter x 10mm cap (not bottle)
Including: centrifugal start wheel, bowl escapement, chute, cap escapement and push on chuck with suction cup
6 rear bottle holders: 2x 40mm, 2x 200mm, 1x 75/120mm, 1x 125/175mm
6 bowl escapements: 49mm (fitted), 63mm, 63mm, 53mm, 58mm, 48mm
7 cap escapements: 49x 18mm (fitted), 49x 18mm, 72x 23mm, 72x 23mm, 51x 14mm, 39x 25mm, 46x 25mm
6 chucks: 1x 50mm diameter click lock, 1x 40mm diameter click lock, 1x 65mm diameter push on with suction cup (no shaft), 1x 40mm diameter push on with suction cup (fitted), 1x 65mm diameter push on no suction cup, 1x 55mm diameter push on no suction cup
2x mounting brackets
Various identical threaded bars
4x clamps
60mm cap slide
Machine size: 2250mm x 1000mm x 2200mm high, weight 400kg
Supplied cleaned, checked and tested dry cycling
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 40 |
| Last activity | Nov. 7, 2026 |
GlobePack Equipment is a global specialist in pharmaceutical, process, and packaging machinery, helping manufacturers buy, sell, source, and maximize the value of industrial equipment worldwide.
From individual machines to complete factory projects, GlobePack supplies quality new and used equipment while providing asset management, refurbishment, relocation, consignment, brokerage, and facility liquidation services.
With decades of industry expertise, GlobePack supports the pharmaceutical, healthcare, veterinary, cosmetics, and personal care sectors with reliable equipment and tailored solutions. Combining global reach, technical knowledge, and a results driven approach, the company makes equipment transactions simpler, faster, and more profitable.
Weiss model WKS 1-8 Single Head Screw or Push on Capper
Currently set up for a 48mm diameter x 18mm high push on cap and a 145mm tall bottle
Key Information:
Speeds of up to 50 per minute depending cap and bottle sizes
Pneumatic gating system to hold bottles directly under the capping head
Pneumatic and laser gating systems to count bottles through
Through conveyor 80mm wide
Inbuilt cap sorter bowl
Moeller PLC
Electrical supply 415V 3ph 16A
5 bar air supply
CE marked
Operation manual included
Parts Available:
Full set of change parts for a 40mm diameter x 10mm cap (not bottle)
Including: centrifugal start wheel, bowl escapement, chute, cap escapement and push on chuck with suction cup
6 rear bottle holders: 2x 40mm, 2x 200mm, 1x 75/120mm, 1x 125/175mm
6 bowl escapements: 49mm (fitted), 63mm, 63mm, 53mm, 58mm, 48mm
7 cap escapements: 49x 18mm (fitted), 49x 18mm, 72x 23mm, 72x 23mm, 51x 14mm, 39x 25mm, 46x 25mm
6 chucks: 1x 50mm diameter click lock, 1x 40mm diameter click lock, 1x 65mm diameter push on with suction cup (no shaft), 1x 40mm diameter push on with suction cup (fitted), 1x 65mm diameter push on no suction cup, 1x 55mm diameter push on no suction cup
2x mounting brackets
Various identical threaded bars
4x clamps
60mm cap slide
Machine size: 2250mm x 1000mm x 2200mm high, weight 400kg
Supplied cleaned, checked and tested dry cycling
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Weiss WKS 1-8 single-head capper suitable for screw or push-on caps. Currently set up for a 48 mm diameter x 18 mm high push-on cap and for bottles up to 145 mm tall. Rated speeds of up to 50 caps per minute (dependent on cap and bottle sizes). Key operating features:
- Pneumatic gating system to hold bottles under the capping head
- Pneumatic and laser gating systems to count bottles through the machine
- Through-conveyor width: 80 mm
- Inbuilt cap sorter bowl
- Moeller PLC control
- Electrical supply: 415 V, 3-phase, 16 A
- Air supply: 5 bar
- CE marked
- Operation manual included
Parts available (as listed):
- Full set of change parts for a 40 mm diameter x 10 mm cap (cap parts listed below): centrifugal start wheel, bowl escapement, chute, cap escapement and push-on chuck with suction cup
- Rear bottle holders (6): 2 × 40 mm, 2 × 200 mm, 1 × 75/120 mm, 1 × 125/175 mm
- Bowl escapements (6): 49 mm (fitted), 63 mm, 63 mm, 53 mm, 58 mm, 48 mm
- Cap escapements (7): 49 × 18 mm (fitted), 49 × 18 mm, 72 × 23 mm, 72 × 23 mm, 51 × 14 mm, 39 × 25 mm, 46 × 25 mm
- Chucks (6): 1 × 50 mm diameter click-lock, 1 × 40 mm diameter click-lock, 1 × 65 mm diameter push-on (with suction cup, no shaft), 1 × 40 mm diameter push-on (with suction cup, fitted), 1 × 65 mm diameter push-on (no suction cup), 1 × 55 mm diameter push-on (no suction cup)
- 2 mounting brackets, various identical threaded bars, 4 clamps, 60 mm cap slide
Machine footprint and weight: 2250 mm × 1000 mm × 2200 mm (H); weight listed as 400 kg.
Note: All specifications and parts listed are taken from the supplied product information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 40 |
| Last activity | Nov. 7, 2026 |
GlobePack Equipment is a global specialist in pharmaceutical, process, and packaging machinery, helping manufacturers buy, sell, source, and maximize the value of industrial equipment worldwide.
From individual machines to complete factory projects, GlobePack supplies quality new and used equipment while providing asset management, refurbishment, relocation, consignment, brokerage, and facility liquidation services.
With decades of industry expertise, GlobePack supports the pharmaceutical, healthcare, veterinary, cosmetics, and personal care sectors with reliable equipment and tailored solutions. Combining global reach, technical knowledge, and a results driven approach, the company makes equipment transactions simpler, faster, and more profitable.
United Kingdom
2026
| Capacity units/hour | 100 u/h |
|---|---|
| Max container Ø | 28 mm |
| Type | Semi- automatic |
| Type of caps | Screw |
|---|---|
| Max container height | 15 mm |
United Kingdom
2002
| Capacity units/hour | 3600 u/h |
|---|---|
| Max container Ø | 100 mm |
| Type of caps | Screw |
|---|---|
| Max container height | 380 mm |
United Kingdom
2013
| Capacity units/hour | 3000 u/h |
|---|---|
| Max container Ø | 0 mm |
| Type of caps | Plastic screw on, Plastic Push, Aluminium ROPP |
|---|---|
| Type | Automatic |
United Kingdom
2023
| Type of caps |
|---|
France
2017
| Type of caps |
|---|
United Kingdom
2008
| Capacity units/hour | 5400 u/h |
|---|---|
| Max container Ø | 70 mm |
| Type of caps | |
|---|---|
| Type | Automatic |
United Kingdom
2013
| Capacity units/hour | 3000 u/h |
|---|
| Type of caps |
|---|
| Type of caps |
|---|
United Kingdom
2021
| Capacity units/hour | 600 u/h |
|---|---|
| Max container Ø | 195 mm |
| Type of caps | |
|---|---|
| Max container height | 355 mm |
United Kingdom
| Capacity units/hour | 5400 u/h |
|---|---|
| Max container Ø | 30 mm |
| Type of caps |
|---|
United Kingdom
2005
| Capacity units/hour | 10000 u/h |
|---|---|
| Max container Ø | 28 mm |
| Type | Automatic |
| Type of caps | |
|---|---|
| Max container height | mm |
United Kingdom
2011
| Type of caps |
|---|
United Kingdom
| Capacity units/hour | 9000 u/h |
|---|
| Type of caps |
|---|
United Kingdom
| Capacity units/hour | 9000 u/h |
|---|---|
| Type | Manual |
| Type of caps |
|---|
United Kingdom
| Type of caps |
|---|
United Kingdom
| Type of caps | |
|---|---|
| Max container height | 240 mm |
| Max container Ø | 100 mm |
|---|
United Kingdom
| Type of caps |
|---|
United Kingdom
| Type of caps | Pump action, tamper evident, child resistant, screw-on, tamper resistant, and pump spray caps |
|---|
| Type of caps | 34mm CRC caps |
|---|
United Kingdom
| Type of caps |
|---|
WKS 1-8 Weiss Една глава за винт или натискащ капак
WKS 1-8 Weiss Jednohlavá šroubovací nebo nasouvací uzávěrka
WKS 1-8 Weiss Enkelt skruehoved eller tryk på hætten
WKS 1-8 Weiss Einzelkopf-Schrauber oder Steckverschluss
WKS 1-8 Weiss Μονή κεφαλή για βίδα ή καπάκι πίεσης
Weiss WKS 1-8 - Capping Machine
WKS 1-8 Weiss Cabezal único para tornillo o tapón de presión
WKS 1-8 Weiss Tête unique pour vis ou bouchon à pression
WKS 1-8 Weiss Jedna glava vijka ili poklopac na potiskivanje
WKS 1-8 Weiss Egyszemélyes csavarfejes vagy rápattintható kupak
WKS 1-8 Weiss Testa singola vite o tappatore a pressione
WKS 1-8 Weiss Viena galvutė varžtui arba prispaudžiamam kamščiui
WKS 1-8 Weiss Enkekop Schroef of Drukdop
WKS 1-8 Weiss Jednogłowicowa zakrętka na śrubę lub na wcisk
WKS 1-8 Weiss Cabeça Única Para Parafuso ou Tampa de Encaixe
WKS 1-8 Weiss Cap unic pentru șurub sau capac cu apăsare
WKS 1-8 Weiss Одноголовочная винтовая или насадная крышка
WKS 1-8 Weiss Jedna glava za šraf ili poklopac na pritisak
WKS 1-8 Weiss Enkel huvudskruv eller tryck på kapsyl
WKS 1-8 Weiss Tek Başlı Vida veya Basmalı Kapatıcı
EN
- Languages
English (GB)