| Manufacturer | WALTER |
|---|---|
| Model | Helitronic Basic |
| Year | 2018 |
| Location | France
|
WALTER Helitronic Basic CNC Grinder
TECHNICAL SPECIFICATIONS:
Year: 2018
CNC control type: FANUC 31i-B5 Series
Installed software version: Tool Studio 3 R2
Color touchscreen: 19 ["]
Number of axes: 5
X-axis travel: 470 [mm]
Y-axis travel: 330 [mm]
Z-axis travel: 640 [mm]
Rapid traverse speed on the X, Y, and Z axes: 15,000 [mm/min]
A-axis travel: 360 [°]
C-axis travel: +/- 200 [°]
Maximum workpiece length: face grinding: 280 [mm]
Maximum grinding diameter: 320 [mm]
Maximum grinding diameter with table: 290 [mm]
Grinding spindle mounting: NCT
Grinding spindle diameter: 70 [mm]
Grinding spindle speed: 10,500 [rpm]
Grinding spindle power: 7 [kW]
Maximum grinding wheel diameter: 150 [mm]
Workpiece spindle taper: ISO 50
Maximum permissible weight on the workpiece head: 20 [kg]
Operating life: 13,617 [h]
Coolant pump pressure: 7 [bar]
Coolant pump flow rate: 80 [l/min]
Coolant tank capacity: 350 [l]
Supply voltage: 400 [V]
Installed power: 20 [kVA]
Weight: 4,700 [kg]
ADDITIONAL EQUIPMENT:
Calibration sphere: automatic calibration of the X, Y, and Z axes.
RENISHAW LP2 workpiece sensor
CO₂ fire suppression system (the buyer must have it inspected by a qualified organization)
LTA EC 120-X-2-H oil mist filtration system (year 2023)
Cutting fluid filtration system with paper filter cartridges
3-color indicator light
“ECO LOADER” tool loader with gripper system
x1 pallet - Ø6 [mm]
x1 tray - Ø8 [mm]
x1 tray - Ø10 [mm]
x1 tray - Ø12 [mm]
x1 tray - Ø16 [mm]
x1 NANN collet holder – Ref. 2.7400.2.003.010 – Type 3718 E collets
x1 NANN collet holder – Part No. 2.7400.2.002.010 – Type 3409 E collets
x1 SCHAUBLIN collet holder – Part No. 68-5728 – Type W20 collets
x1 Type 3409 E jaw collet - Ø4.5 [mm]
x1 Type 3409 E pointed collet - Ø5 [mm]
x2 Type 3409 E pointed collets - Ø6 [mm]
x3 Type 3409 E tip collets - Ø8 [mm]
x1 Type 3409 E tip collet - Ø10 [mm]
x1 Type 3409 E tip collet - Ø12 [mm]
x1 Type 3409 E tip clamp - Ø14 [mm]
x1 Type 3409 E tip clamp - Ø18 [mm]
x2 Type 3409 E tip clamps - Ø20 [mm]
x1 Type 3409 E clamp - Ø8 [mm]
x1 Type 3409 E clamp - Ø10 [mm]
x2 Type 3409 E clamps - Ø12 [mm]
x1 Type 3409 E collet - Ø16 [mm]
x5 tie rods for various types of collets
x1 service wrench for tie rod
x2 ISO50 cones
x2 sleeves (no part number)
x1 clamping sleeve
x1 set of collets for “ECO LOADER” for tools with shanks from Ø 6 to Ø 16 [mm]
x1 set of collets for “ECO LOADER” for tools with a shank of Ø 32 [mm]
x17 grinding wheel holders (various lengths)
x102 spacers for grinding wheel holders
x1 WALTER ISO50 calibration bar
x1 WALTER NCT calibration disc
x1 backup of machine parameters on a USB drive
x1 WALTER user manual (in French)
x1 ToolStudio programming manual (in French)
x1 WALTER electrical schematics manual
x1 LTA electrical schematics manual
x1 RENISHAW LP2 manual
* The collet holder shown in the photos, as well as the Ø16 mm collet, are not included with the machine.
Machine available for testing at our facility by appointment.
Price excluding VAT upon request; truck loading included.
Shipping available throughout France and internationally.
More photos and details available upon request.
Technical description provided for informational purposes only; no obligation on our part.
Machine for sharpening tools, end mills, tap cutters, and drill bits.
Machine similar to those manufactured by Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, and Walter; see also cylindrical or surface grinders, lathes, machining centers, and milling machines.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 19 |
| Last activity | Nov. 7, 2026 |
KRAFFTER Machine Tools is a trusted French company specializing in the purchase, refurbishment, and sale of high-precision used CNC machine tools. Located in the Auvergne-Rhône-Alpes region, KRAFFTER serves industrial clients across Europe with reliable, cost-effective solutions tailored to the needs of precision manufacturing.
Their wide inventory covers a full spectrum of machine tools including turning, milling, grinding, sharpening, drilling, gear cutting, sawing, and metrology equipment. What sets KRAFFTER apart is their commitment to quality: each machine undergoes expert inspection and refurbishment by in-house specialists, ensuring optimal performance and accuracy.
KRAFFTER also provides comprehensive support services, from mechanical and electrical diagnostics to full refurbishments and retrofitting. They handle transport logistics and export formalities, delivering turnkey machines that are ready for immediate integration into production lines.
With a strong reputation for responsiveness and technical excellence, KRAFFTER Machine Tools is the ideal partner for companies looking to invest in premium machine tools while keeping budgets under control. If you are looking for ready-to-run, high-performance machines backed by professional service, KRAFFTER delivers precision you can count on.
WALTER Helitronic Basic CNC Grinder
TECHNICAL SPECIFICATIONS:
Year: 2018
CNC control type: FANUC 31i-B5 Series
Installed software version: Tool Studio 3 R2
Color touchscreen: 19 ["]
Number of axes: 5
X-axis travel: 470 [mm]
Y-axis travel: 330 [mm]
Z-axis travel: 640 [mm]
Rapid traverse speed on the X, Y, and Z axes: 15,000 [mm/min]
A-axis travel: 360 [°]
C-axis travel: +/- 200 [°]
Maximum workpiece length: face grinding: 280 [mm]
Maximum grinding diameter: 320 [mm]
Maximum grinding diameter with table: 290 [mm]
Grinding spindle mounting: NCT
Grinding spindle diameter: 70 [mm]
Grinding spindle speed: 10,500 [rpm]
Grinding spindle power: 7 [kW]
Maximum grinding wheel diameter: 150 [mm]
Workpiece spindle taper: ISO 50
Maximum permissible weight on the workpiece head: 20 [kg]
Operating life: 13,617 [h]
Coolant pump pressure: 7 [bar]
Coolant pump flow rate: 80 [l/min]
Coolant tank capacity: 350 [l]
Supply voltage: 400 [V]
Installed power: 20 [kVA]
Weight: 4,700 [kg]
ADDITIONAL EQUIPMENT:
Calibration sphere: automatic calibration of the X, Y, and Z axes.
RENISHAW LP2 workpiece sensor
CO₂ fire suppression system (the buyer must have it inspected by a qualified organization)
LTA EC 120-X-2-H oil mist filtration system (year 2023)
Cutting fluid filtration system with paper filter cartridges
3-color indicator light
“ECO LOADER” tool loader with gripper system
x1 pallet - Ø6 [mm]
x1 tray - Ø8 [mm]
x1 tray - Ø10 [mm]
x1 tray - Ø12 [mm]
x1 tray - Ø16 [mm]
x1 NANN collet holder – Ref. 2.7400.2.003.010 – Type 3718 E collets
x1 NANN collet holder – Part No. 2.7400.2.002.010 – Type 3409 E collets
x1 SCHAUBLIN collet holder – Part No. 68-5728 – Type W20 collets
x1 Type 3409 E jaw collet - Ø4.5 [mm]
x1 Type 3409 E pointed collet - Ø5 [mm]
x2 Type 3409 E pointed collets - Ø6 [mm]
x3 Type 3409 E tip collets - Ø8 [mm]
x1 Type 3409 E tip collet - Ø10 [mm]
x1 Type 3409 E tip collet - Ø12 [mm]
x1 Type 3409 E tip clamp - Ø14 [mm]
x1 Type 3409 E tip clamp - Ø18 [mm]
x2 Type 3409 E tip clamps - Ø20 [mm]
x1 Type 3409 E clamp - Ø8 [mm]
x1 Type 3409 E clamp - Ø10 [mm]
x2 Type 3409 E clamps - Ø12 [mm]
x1 Type 3409 E collet - Ø16 [mm]
x5 tie rods for various types of collets
x1 service wrench for tie rod
x2 ISO50 cones
x2 sleeves (no part number)
x1 clamping sleeve
x1 set of collets for “ECO LOADER” for tools with shanks from Ø 6 to Ø 16 [mm]
x1 set of collets for “ECO LOADER” for tools with a shank of Ø 32 [mm]
x17 grinding wheel holders (various lengths)
x102 spacers for grinding wheel holders
x1 WALTER ISO50 calibration bar
x1 WALTER NCT calibration disc
x1 backup of machine parameters on a USB drive
x1 WALTER user manual (in French)
x1 ToolStudio programming manual (in French)
x1 WALTER electrical schematics manual
x1 LTA electrical schematics manual
x1 RENISHAW LP2 manual
* The collet holder shown in the photos, as well as the Ø16 mm collet, are not included with the machine.
Machine available for testing at our facility by appointment.
Price excluding VAT upon request; truck loading included.
Shipping available throughout France and internationally.
More photos and details available upon request.
Technical description provided for informational purposes only; no obligation on our part.
Machine for sharpening tools, end mills, tap cutters, and drill bits.
Machine similar to those manufactured by Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, and Walter; see also cylindrical or surface grinders, lathes, machining centers, and milling machines.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 19 |
| Last activity | Nov. 7, 2026 |
KRAFFTER Machine Tools is a trusted French company specializing in the purchase, refurbishment, and sale of high-precision used CNC machine tools. Located in the Auvergne-Rhône-Alpes region, KRAFFTER serves industrial clients across Europe with reliable, cost-effective solutions tailored to the needs of precision manufacturing.
Their wide inventory covers a full spectrum of machine tools including turning, milling, grinding, sharpening, drilling, gear cutting, sawing, and metrology equipment. What sets KRAFFTER apart is their commitment to quality: each machine undergoes expert inspection and refurbishment by in-house specialists, ensuring optimal performance and accuracy.
KRAFFTER also provides comprehensive support services, from mechanical and electrical diagnostics to full refurbishments and retrofitting. They handle transport logistics and export formalities, delivering turnkey machines that are ready for immediate integration into production lines.
With a strong reputation for responsiveness and technical excellence, KRAFFTER Machine Tools is the ideal partner for companies looking to invest in premium machine tools while keeping budgets under control. If you are looking for ready-to-run, high-performance machines backed by professional service, KRAFFTER delivers precision you can count on.
Шлифовъчна машина WALTER Helitronic Basic
Bruska WALTER Helitronic Basic
WALTER Helitronic Basic Slibemaskine
WALTER Helitronic Basic Schleifmaschine
Μηχανή λείανσης WALTER Helitronic Basic
WALTER Helitronic Basic Grinding machine
Rectificadora WALTER Helitronic Basic
Affûteuse CNC WALTER Helitronic Basic
Brusilica WALTER Helitronic Basic
WALTER Helitronic Basic Köszörűgép
Rettificatrice WALTER Helitronic Basic
WALTER Helitronic Basic Šlifavimo staklės
WALTER Helitronic Basic Slijpmachine
Szlifierka WALTER Helitronic Basic
Retificadora WALTER Helitronic Basic
Mașină de rectificat WALTER Helitronic Basic
WALTER Helitronic Basic Шлифовальный станок
Brusilica WALTER Helitronic Basic
WALTER Helitronic Basic Slipmaskin
Taşlama makinesi WALTER Helitronic Basic
EN
- Languages
English (GB)