Contact us to receive an offer.
| Manufacturer | VSS |
|---|---|
| Model | LE 250 C |
| Year | |
| Location | Czech Republic
|
| Category | Forging - Eccentric presses |
| Power in tons | T |
| Table length | 1120 mm |
| Table width | 800 mm |
| Ram stroke | 30 mm |
| Nbr of strokes/min | |
| Distance between columns | mm |
| Engine Power | kW |
| Length x width x height | - × - × - |
| Weight | 13000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | VSS LE 250 C |
| Last availability date | 05/11/2026 |
| Product id | P260729313 |
| Language |
Ексцентрикова преса VSS LE 250 C
Excentrický lis VSS LE 250 C
VSS LE 250 C Excenterpresse
VSS LE 250 C Exzenterpresse
Εκκεντρική πρέσα VSS LE 250 C
VSS LE 250 C Eccentric press
Prensa excéntrica VSS LE 250 C
Presse excentrique VSS LE 250 C
Ekscentarska preša VSS LE 250 C
VSS LE 250 C Excenteres prés
Pressa eccentrica VSS LE 250 C
VSS LE 250 C Ekscentrinis presas
VSS LE 250 C Excenterpers
Prasa mimośrodowa VSS LE 250 C
Prensa excêntrica VSS LE 250 C
Presă excentrică VSS LE 250 C
VSS LE 250 C Кривошипный пресс
Ekscentarska presa VSS LE 250 C
VSS LE 250 C Excenterpress
Eksantrik pres VSS LE 250 C
|
VSS LE 250 C eccentric press, rated at 250 t pressing force. Key machine data: table length 1120 mm, table width 800 mm, ram stroke 30 mm, ram adjust range 110 mm, and machine weight 13,000 kg. The press is a large-frame eccentric design with a prominent ram/housing at the upper front.
Mechanical components and drive: the machine is equipped with a large grooved flywheel and multi-groove V-belt drive routed to a lower shaft. A large external gear wheel is mounted at the top rear, and a lower shaft with a worm gear is accessible through the lower compartment. A circular flywheel hub/clutch assembly with multiple bolted connections is present, with hydraulic/pneumatic hoses and multiple V-belts routed from the flywheel to the eccentric/worm shaft.
Controls, pneumatics and plumbing: a white electrical/control cabinet is mounted to the side of the machine and there is also a free-standing control cabinet at the right side with pushbuttons and an emergency stop. Power cables and a connector plug are routed from the cabinet through a side grommet into the machine. A small red enclosure/holder is attached to the cabinet door. Pneumatic/air preparation components — including a filter/regulator and a small pump or lubricator — are mounted on the lower side of the frame. Multiple clear tubing lines and electrical wires are routed along the frame through a circular grommet.
Accessories and condition notes: a die plate is fitted beneath the ram and wooden bars and miscellaneous parts/containers are present on the table. Visible wear includes chipped paint, surface grime, scuffs and areas of light rust on table edges and the lower frame. Belt and pulley surfaces show dirt and signs of use but appear intact. Grease/oil residues are visible around the flywheel hub and lower compartment. The electrical cabinet exterior shows scuffs and minor surface dirt; the cabinet door appears closed.
No statements are made about functional condition, testing, refurbishment or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
presses/ hammers
excentric press
GO: Mechanics and electrical switchboards
Pressing Force: 250 t
Length Of The Table: 1120 mm
Width Of The Table: 800 mm
Ram Stroke: 30 mm
Adjusting The Ram: 110 mm
Machine Weight: 13000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1165 |
| Last activity | Nov. 8, 2026 |
presses/ hammers
excentric press
GO: Mechanics and electrical switchboards
Pressing Force: 250 t
Length Of The Table: 1120 mm
Width Of The Table: 800 mm
Ram Stroke: 30 mm
Adjusting The Ram: 110 mm
Machine Weight: 13000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Eccentric presses |
| Power in tons | T |
| Table length | 1120 mm |
| Table width | 800 mm |
| Ram stroke | 30 mm |
| Nbr of strokes/min | |
| Distance between columns | mm |
| Engine Power | kW |
| Length x width x height | - × - × - |
| Weight | 13000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | VSS LE 250 C |
| Last availability date | 05/11/2026 |
| Product id | P260729313 |
| Language |
Ексцентрикова преса VSS LE 250 C
Excentrický lis VSS LE 250 C
VSS LE 250 C Excenterpresse
VSS LE 250 C Exzenterpresse
Εκκεντρική πρέσα VSS LE 250 C
VSS LE 250 C Eccentric press
Prensa excéntrica VSS LE 250 C
Presse excentrique VSS LE 250 C
Ekscentarska preša VSS LE 250 C
VSS LE 250 C Excenteres prés
Pressa eccentrica VSS LE 250 C
VSS LE 250 C Ekscentrinis presas
VSS LE 250 C Excenterpers
Prasa mimośrodowa VSS LE 250 C
Prensa excêntrica VSS LE 250 C
Presă excentrică VSS LE 250 C
VSS LE 250 C Кривошипный пресс
Ekscentarska presa VSS LE 250 C
VSS LE 250 C Excenterpress
Eksantrik pres VSS LE 250 C
|
VSS LE 250 C eccentric press, rated at 250 t pressing force. Key machine data: table length 1120 mm, table width 800 mm, ram stroke 30 mm, ram adjust range 110 mm, and machine weight 13,000 kg. The press is a large-frame eccentric design with a prominent ram/housing at the upper front.
Mechanical components and drive: the machine is equipped with a large grooved flywheel and multi-groove V-belt drive routed to a lower shaft. A large external gear wheel is mounted at the top rear, and a lower shaft with a worm gear is accessible through the lower compartment. A circular flywheel hub/clutch assembly with multiple bolted connections is present, with hydraulic/pneumatic hoses and multiple V-belts routed from the flywheel to the eccentric/worm shaft.
Controls, pneumatics and plumbing: a white electrical/control cabinet is mounted to the side of the machine and there is also a free-standing control cabinet at the right side with pushbuttons and an emergency stop. Power cables and a connector plug are routed from the cabinet through a side grommet into the machine. A small red enclosure/holder is attached to the cabinet door. Pneumatic/air preparation components — including a filter/regulator and a small pump or lubricator — are mounted on the lower side of the frame. Multiple clear tubing lines and electrical wires are routed along the frame through a circular grommet.
Accessories and condition notes: a die plate is fitted beneath the ram and wooden bars and miscellaneous parts/containers are present on the table. Visible wear includes chipped paint, surface grime, scuffs and areas of light rust on table edges and the lower frame. Belt and pulley surfaces show dirt and signs of use but appear intact. Grease/oil residues are visible around the flywheel hub and lower compartment. The electrical cabinet exterior shows scuffs and minor surface dirt; the cabinet door appears closed.
No statements are made about functional condition, testing, refurbishment or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1165 |
| Last activity | Nov. 8, 2026 |
EN
- Languages
English (GB)