Contact us to receive an offer.
| Manufacturer | Voortman |
|---|---|
| Model | VCS Thermo |
| Year | 2012 |
| Location | Czech Republic
|
This listing features a Voortman VCS Thermo plasma cutting machine manufactured in 2012. The cutting table measures 6000 x 2000 mm, with an additional overlap of approximately 50 mm along both axes. The machine is equipped with a Kjellberg HiFocus 280i plasma source capable of cutting steel sheets from 1 mm thickness at 35A up to 60 mm thickness at 280A, including a cooling system. An autogen cutting option is also available with a separate burner, although it is noted as mostly unused in the current region.
The system includes a fully automatic TEKA extraction and filtration setup, consisting of a tower housing four replaceable filter cartridges. Compressed air is supplied by a Käser SM9 compressor. The machine has been primarily used for cutting black steel in S235 and S355 qualities, utilizing a mixture of air and oxygen. Additional hoses for nitrogen (used with autogen cutting) and argon (used for marking) are included.
The Voortman VCS Thermo is controlled either directly via the machine's screen or through third-party software accessible from an office computer; however, an additional software license is required, which is not provided with the machine. The seller offers full cooperation regarding programming support.
The machine has been used on average for a maximum of six hours per day, typically less than one full shift. Critical Kjellberg components such as the plasma source, control unit, gas mixers, valves, and burner have been regularly serviced by an authorized Czech service provider. The HeightControl system, which automatically adjusts the burner height for bent sheets, may require minor servicing but does not currently hinder operation.
Visually, the machine appears used but in good condition, with some signs of wear on the cutting table. The cutting head is mounted on the gantry with visible hoses and cables. Overall, this Voortman VCS Thermo offers a robust plasma cutting solution with comprehensive filtration, compressor support, and versatile cutting capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Table size: 6,000 x 2,000 mm (+ overlaps in both axes of the order of 50mm)
Plasma source: Kjellberg HiFocus 280i (Plasma firing from sheet thickness 1mm at 35A up to 60mm at 280A) including cooling.
Autogen option: YES. Separate burner part of the machine. Mostly not used in our country.
Extraction and Filtration: fully automatic TEKA system (tower for 4 replaceable filter cartridges)
Compressor: Käser SM9
Machine load: On average max. 6 hours per day (less than 1
shift)
Used only for black steel in qualities S235 and S355. Mixture of Air and Oxygen. Nitrogen (for autogen) and Argon (for
marking) hoses are also included
. Currently, the machine is running normally, without defects, we can demonstrate. All critical Kjellberg components regularly serviced (source, control unit, gas mixers, valves,
burner) by an authorized Czech service.
The only thing that deserves a minor service is the HeightControl system, which ensures automatic correction of the burner height for very bent sheets. However, it is nothing major, it does not hinder us in our work.
The machine is programmed either on the machine screen or from the office through third-party software (an additional license must be purchased, we do not provide it). However, we offer full cooperation in this area.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Voortman VCS Thermo cutting machine manufactured?
This Voortman VCS Thermo plasma/gas cutting machine was manufactured in 2012.
Is this Voortman VCS Thermo cutting machine currently operational?
This Voortman VCS Thermo cutting machine is currently under power.
What is the condition of this equipment?
This equipment is in good condition.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 76 |
| Last activity | Nov. 3, 2026 |
Table size: 6,000 x 2,000 mm (+ overlaps in both axes of the order of 50mm)
Plasma source: Kjellberg HiFocus 280i (Plasma firing from sheet thickness 1mm at 35A up to 60mm at 280A) including cooling.
Autogen option: YES. Separate burner part of the machine. Mostly not used in our country.
Extraction and Filtration: fully automatic TEKA system (tower for 4 replaceable filter cartridges)
Compressor: Käser SM9
Machine load: On average max. 6 hours per day (less than 1
shift)
Used only for black steel in qualities S235 and S355. Mixture of Air and Oxygen. Nitrogen (for autogen) and Argon (for
marking) hoses are also included
. Currently, the machine is running normally, without defects, we can demonstrate. All critical Kjellberg components regularly serviced (source, control unit, gas mixers, valves,
burner) by an authorized Czech service.
The only thing that deserves a minor service is the HeightControl system, which ensures automatic correction of the burner height for very bent sheets. However, it is nothing major, it does not hinder us in our work.
The machine is programmed either on the machine screen or from the office through third-party software (an additional license must be purchased, we do not provide it). However, we offer full cooperation in this area.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Voortman VCS Thermo cutting machine manufactured?
This Voortman VCS Thermo plasma/gas cutting machine was manufactured in 2012.
Is this Voortman VCS Thermo cutting machine currently operational?
This Voortman VCS Thermo cutting machine is currently under power.
What is the condition of this equipment?
This equipment is in good condition.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features a Voortman VCS Thermo plasma cutting machine manufactured in 2012. The cutting table measures 6000 x 2000 mm, with an additional overlap of approximately 50 mm along both axes. The machine is equipped with a Kjellberg HiFocus 280i plasma source capable of cutting steel sheets from 1 mm thickness at 35A up to 60 mm thickness at 280A, including a cooling system. An autogen cutting option is also available with a separate burner, although it is noted as mostly unused in the current region.
The system includes a fully automatic TEKA extraction and filtration setup, consisting of a tower housing four replaceable filter cartridges. Compressed air is supplied by a Käser SM9 compressor. The machine has been primarily used for cutting black steel in S235 and S355 qualities, utilizing a mixture of air and oxygen. Additional hoses for nitrogen (used with autogen cutting) and argon (used for marking) are included.
The Voortman VCS Thermo is controlled either directly via the machine's screen or through third-party software accessible from an office computer; however, an additional software license is required, which is not provided with the machine. The seller offers full cooperation regarding programming support.
The machine has been used on average for a maximum of six hours per day, typically less than one full shift. Critical Kjellberg components such as the plasma source, control unit, gas mixers, valves, and burner have been regularly serviced by an authorized Czech service provider. The HeightControl system, which automatically adjusts the burner height for bent sheets, may require minor servicing but does not currently hinder operation.
Visually, the machine appears used but in good condition, with some signs of wear on the cutting table. The cutting head is mounted on the gantry with visible hoses and cables. Overall, this Voortman VCS Thermo offers a robust plasma cutting solution with comprehensive filtration, compressor support, and versatile cutting capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 76 |
| Last activity | Nov. 3, 2026 |
Машина за рязане - плазма / газ Voortman VCS Thermo
Řezačka plasmová / plynová Voortman VCS Thermo
Voortman VCS Thermo Skæremaskine - Plasma/gas
Voortman VCS Thermo Schneidemaschine - Plasma / gas
Κοπτική μηχανή - Plasma / gas Voortman VCS Thermo
Voortman VCS Thermo Cutting machine - Plasma / gas
Máquina de corte por plasma / gas Voortman VCS Thermo
Machine de découpe plasma / gaz Voortman VCS Thermo
Stroj za rezanje - plazma / plin Voortman VCS Thermo
Voortman VCS Thermo Vágógép - Plazma/gáz
Impianto taglio plasma/ossitaglio Voortman VCS Thermo
Pjovimo mašina - Plazminė/dujinė Voortman VCS Thermo
Voortman VCS Thermo Snijmachine - Plasma/gas
Wycinarka plazmowa / gazowa Voortman VCS Thermo
Máquina de corte - Plasma / gás Voortman VCS Thermo
Mașină de tăiat - Plasmă/gaz Voortman VCS Thermo
Voortman VCS Thermo Станок для резки плазма / газ
Mašina za sečenje - plazma / gas Voortman VCS Thermo
Voortman VCS Thermo Skärmaskin - Plasma / gas
Kesim makinesi Voortman VCS Thermo
EN
- Languages
English (GB)