| Manufacturer | VES (VACUUM ENGINEERING SERVICES) |
|---|---|
| Model | MCB1529 |
| Year | 2020 |
| Location | Sweden
|
The VES (VACUUM ENGINEERING SERVICES) MCB1529 is an industrial helium leak test machine designed for precise leak detection in components by utilizing vacuum and tracer gas techniques. Manufactured in 2020, this model measures 2754 mm in length, 2156 mm in width, and 2187 mm in height. The system operates by creating a vacuum inside both the test chamber and the component under examination. The component is then pressurized with helium gas at 70 mbar. A mass spectrometer connected to the vacuum chamber detects helium that may escape from the component, indicating a leak. The machine identifies leaks with a nominal helium leak rate sensitivity of 1x10⁻⁵ mbar·l/s at 100% helium concentration.
This model features four test chambers, allowing for efficient throughput with a cycle time of approximately 14 seconds per part. The testing process is fully automated from start to finish, including vacuum creation, helium charging, leak detection, and pass/fail result indication. In the event of a failure, the operator must acknowledge the failure via a "Fail Accept" push button before the chamber vents and the lid opens. For passing parts, the chamber automatically vents and opens to facilitate loading of the next component.
The machine is constructed with a white dual-compartment design, featuring black and yellow safety stripes on the edges and central divider for enhanced operator safety. Each compartment includes angled front panels with QR codes, and the VES company logo is displayed on the back panel inside each compartment. Control panels equipped with emergency stop buttons and colored push buttons are located on the front central divider and right side of the machine. Additionally, a handheld barcode scanner is attached to the right side, supporting component identification and tracking during testing operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
VES (VACUUM ENGINEERING SERVICES) LDS3000
System MCB1529
Leak test machines for the specified product (component)
The helium leak test involves creating a vacuum both inside the chamber and component. The component is then charged with a tracer gas of helium to the required pressure. A mass spectrometer, which can detect minute quantities of helium, is connected to the vacuum chamber and should the component leak, helium will be detected in the chamber. If the amount of helium detected exceeds a predetermined limit over a set time, the test fails. If the amount detected is lower than the limit, the test passes.
Cycles are fully automated from the point of initiation until a pass/fail result is indicated. Any test failures must be acknowledged via the “Fail Accept” push button prior to the chamber venting / lid opening. If the component passes the leak test, the chamber will vent / open automatically so the next component to be tested can be loaded and connected.
Number of chambers 4
Gross test pressure Atmospheric pressure
Helium test pressure 70 mbar
Helium leak rate Nominally 1x10-5 mbarl/s with 100% He concentration
Machine cycle time / production rate 14s per part
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | March 19, 2026 |
VES (VACUUM ENGINEERING SERVICES) LDS3000
System MCB1529
Leak test machines for the specified product (component)
The helium leak test involves creating a vacuum both inside the chamber and component. The component is then charged with a tracer gas of helium to the required pressure. A mass spectrometer, which can detect minute quantities of helium, is connected to the vacuum chamber and should the component leak, helium will be detected in the chamber. If the amount of helium detected exceeds a predetermined limit over a set time, the test fails. If the amount detected is lower than the limit, the test passes.
Cycles are fully automated from the point of initiation until a pass/fail result is indicated. Any test failures must be acknowledged via the “Fail Accept” push button prior to the chamber venting / lid opening. If the component passes the leak test, the chamber will vent / open automatically so the next component to be tested can be loaded and connected.
Number of chambers 4
Gross test pressure Atmospheric pressure
Helium test pressure 70 mbar
Helium leak rate Nominally 1x10-5 mbarl/s with 100% He concentration
Machine cycle time / production rate 14s per part
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The VES (VACUUM ENGINEERING SERVICES) MCB1529 is an industrial helium leak test machine designed for precise leak detection in components by utilizing vacuum and tracer gas techniques. Manufactured in 2020, this model measures 2754 mm in length, 2156 mm in width, and 2187 mm in height. The system operates by creating a vacuum inside both the test chamber and the component under examination. The component is then pressurized with helium gas at 70 mbar. A mass spectrometer connected to the vacuum chamber detects helium that may escape from the component, indicating a leak. The machine identifies leaks with a nominal helium leak rate sensitivity of 1x10⁻⁵ mbar·l/s at 100% helium concentration.
This model features four test chambers, allowing for efficient throughput with a cycle time of approximately 14 seconds per part. The testing process is fully automated from start to finish, including vacuum creation, helium charging, leak detection, and pass/fail result indication. In the event of a failure, the operator must acknowledge the failure via a "Fail Accept" push button before the chamber vents and the lid opens. For passing parts, the chamber automatically vents and opens to facilitate loading of the next component.
The machine is constructed with a white dual-compartment design, featuring black and yellow safety stripes on the edges and central divider for enhanced operator safety. Each compartment includes angled front panels with QR codes, and the VES company logo is displayed on the back panel inside each compartment. Control panels equipped with emergency stop buttons and colored push buttons are located on the front central divider and right side of the machine. Additionally, a handheld barcode scanner is attached to the right side, supporting component identification and tracking during testing operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | March 19, 2026 |
Измервателна машина VES (VACUUM ENGINEERING SERVICES) MCB1529
Měřicí stroj VES (VACUUM ENGINEERING SERVICES) MCB1529
VES (VACUUM ENGINEERING SERVICES) MCB1529 Målemaskine
VES (VACUUM ENGINEERING SERVICES) MCB1529 Messmaschine
Μηχανή μέτρησης VES (VACUUM ENGINEERING SERVICES) MCB1529
Four chamber helium leak tester
Máquina de medición VES (VACUUM ENGINEERING SERVICES) MCB1529
Machine de mesure VES (VACUUM ENGINEERING SERVICES) MCB1529
Mjerni stroj VES (VACUUM ENGINEERING SERVICES) MCB1529
VES (VACUUM ENGINEERING SERVICES) MCB1529 Mérőgép
Macchina di misura VES (VACUUM ENGINEERING SERVICES) MCB1529
Matavimo mašina VES (VACUUM ENGINEERING SERVICES) MCB1529
VES (VACUUM ENGINEERING SERVICES) MCB1529 Meetmachine
Maszyna pomiarowa VES (VACUUM ENGINEERING SERVICES) MCB1529
Máquina de medição VES (VACUUM ENGINEERING SERVICES) MCB1529
Mașină de măsurat VES (VACUUM ENGINEERING SERVICES) MCB1529
VES (VACUUM ENGINEERING SERVICES) MCB1529 Измерительная машина
Merna mašina VES (VACUUM ENGINEERING SERVICES) MCB1529
VES (VACUUM ENGINEERING SERVICES) MCB1529 Mätmaskin
Ölçme makinesi VES (VACUUM ENGINEERING SERVICES) MCB1529
EN
- Languages
English (GB)