Contact us to receive an offer.
| Manufacturer | Vason |
|---|---|
| Model | YCM XV 560 A |
| Year | 2011 |
| Location | Czech Republic
|
Overview:
This listing describes a vertical machining center. The seller lists the machine as being in good technical condition and provides a set of core technical specifications below. No images or additional accessory information are provided with the listing, so details about control type, toolchanger, coolant system, fixtures or electrical configuration are not included and should be requested if required.
Key specifications (as provided):
- Machine type: Vertical machining center
- Condition: In good technical condition (as listed)
- Year of manufacture: 2011
- Power: 11 kW
- Maximum spindle speed: 10,000 RPM
- Table size: 700x420
- Travel X / Y / Z: 560 / 410 / 450
Notes and recommendations for potential buyers:
- The listed condition is stated as “In good technical condition.” The listing does not include information about recent service, test reports, run hours, or any warranties. If these items are important, request them from the seller.
- Important missing details that buyers commonly request include the control model and software, type and capacity of the toolchanger, spindle taper, presence and condition of coolant and chip conveyor systems, electrical requirements, and any available maintenance records. These items are not present in the provided information and should be clarified prior to purchase.
- No images or photographic documentation are included with this listing. Buyers should request photos showing the machine’s exterior, worktable, spindle nose, control panel, and any accessories or tooling, as well as the machine’s identification plate and documentation if available.
If you would like, I can help draft a list of specific questions to send to the seller or a checklist for on-site inspection to verify the machine’s condition and configuration.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
In good technical condition.
Year of manufacture: 2011
Power: 11 kW
Max. speed: 10,000 RPM
Table size: 700x420
Travel X/Y/Z: 560/410/450
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 16 |
| Last activity | Oct. 28, 2026 |
In good technical condition.
Year of manufacture: 2011
Power: 11 kW
Max. speed: 10,000 RPM
Table size: 700x420
Travel X/Y/Z: 560/410/450
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
This listing describes a vertical machining center. The seller lists the machine as being in good technical condition and provides a set of core technical specifications below. No images or additional accessory information are provided with the listing, so details about control type, toolchanger, coolant system, fixtures or electrical configuration are not included and should be requested if required.
Key specifications (as provided):
- Machine type: Vertical machining center
- Condition: In good technical condition (as listed)
- Year of manufacture: 2011
- Power: 11 kW
- Maximum spindle speed: 10,000 RPM
- Table size: 700x420
- Travel X / Y / Z: 560 / 410 / 450
Notes and recommendations for potential buyers:
- The listed condition is stated as “In good technical condition.” The listing does not include information about recent service, test reports, run hours, or any warranties. If these items are important, request them from the seller.
- Important missing details that buyers commonly request include the control model and software, type and capacity of the toolchanger, spindle taper, presence and condition of coolant and chip conveyor systems, electrical requirements, and any available maintenance records. These items are not present in the provided information and should be clarified prior to purchase.
- No images or photographic documentation are included with this listing. Buyers should request photos showing the machine’s exterior, worktable, spindle nose, control panel, and any accessories or tooling, as well as the machine’s identification plate and documentation if available.
If you would like, I can help draft a list of specific questions to send to the seller or a checklist for on-site inspection to verify the machine’s condition and configuration.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 16 |
| Last activity | Oct. 28, 2026 |
Вертикален обработващ център Vason YCM XV 560 A
Vertikální obráběcí centrum Vason YCM XV 560 A
Vason YCM XV 560 A Lodret bearbejdningscenter
Vason YCM XV 560 A Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Vason YCM XV 560 A
Vason YCM XV 560 A Vertical machining center
Centro de mecanizado vertical Vason YCM XV 560 A
Centre d'usinage vertical Vason YCM XV 560 A
Vertikalni obradni centar Vason YCM XV 560 A
Vason YCM XV 560 A Függőleges megmunkáló központ
Centro di lavoro verticale Vason YCM XV 560 A
Vason YCM XV 560 A Vertikalus apdirbimo centras
Vason YCM XV 560 A Verticaal bewerkingscentrum
Pionowe centrum obróbcze Vason YCM XV 560 A
Centro de usinagem vertical Vason YCM XV 560 A
Centru de prelucrare vertical Vason YCM XV 560 A
Vason YCM XV 560 A Вертикальный обрабатывающий центр
Vertikalni obradni centar Vason YCM XV 560 A
Vason YCM XV 560 A Vertikalt bearbetningscenter
Dikey işleme merkezi Vason YCM XV 560 A
EN
- Languages
English (GB)