| Category | Industrial boilers |
| Engine Power | 200 kW |
| Pressure | 600 bar |
| Fuel | natural gas |
| worked hours | 1500 hours |
| hours under power | 1500 hours |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Datasheet | Vapor Power KR2 -P4748-YHK |
| Last availability date | 28/04/2026 |
| Product id | P260202167 |
| Language |
Manufacturer: Vapor Power
Model: KR2-P4748-YHK
Year of Manufacture: 1975
Engine Power: 200.0 kW
Maximum Pressure: 600 bar
Fuel Type: Natural gas (burner nozzle currently set for propane but convertible)
Description:
This industrial steam boiler from Vapor Power delivers 200 horsepower and is designed for a maximum operating pressure of 600 bar. Manufactured in 1975, it has seen limited use with fewer than 1500 hours of operation. Originally supplied to a laboratory in Pittsburgh, PA, the boiler was primarily used in enhanced oil recovery operations in Oklahoma, functioning approximately one week per year during new well drilling.
The boiler is equipped with a coil type design and includes several key components such as a steam separator, John Bean triplex pump, relief valve, motor, valves, chemical feed pumps, and breeching. It features an electric motor mounted on the assembly and a control panel with gauges and safety warning labels including 'Danger High Voltage' and 'Danger Open Disconnect'. Multiple pipes and valves are connected to the boiler, all showing signs of wear, surface rust, and dust accumulation consistent with its age and usage.
The coil section and associated valves, steam separator, and pump are in fair condition and may be suitable for replacing damaged parts in a similar Modulatic boiler. The burner nozzle is set for propane but can be converted for natural gas or diesel fuel. Note that the gas train and water flow controls require repair, and diesel components have been removed but remain available.
Potential buyers should inspect the boiler and its accessories prior to purchase. The equipment is sold as-is, where-is, without warranty. The buyer is responsible for load securing and transportation arrangements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: 200 Horsepower Steam Boiler 1975 600 PSI Low Hours - Vapor Power Coil Type in Fair Condition
Manufacturer: Vapor Power
Model: KR2 -P4748-YHK
Year of Manufacture: 1975
Working Hours: Fewer than 1500 hours
Technical Condition: As-is, where-is
State: Visible
Description:
This 200 horsepower Vapor Power Modulatic steam boiler is designed for a maximum pressure of 600 PSIG. It features a propane/natural gas burner and includes a new duplex water softener that has only been used for 5 days. The boiler was originally delivered to a laboratory in Pittsburgh, PA, in 1975 and has seen minimal use, primarily for enhanced oil recovery in Oklahoma, operating only one week per year during new well drilling.
The boiler comes equipped with a steam separator, John Bean triplex pump, relief valve, motor, valves, chemical feed pumps, and breeching. The burner nozzle is currently set for propane but can be converted to natural gas or diesel. The gas train and water flow controls require repair, and the diesel components have been removed but are available.
The coil section is in fair condition and can be utilized to replace damaged coils in another Modulatic boiler. All valves, the steam separator, and pump are also in fair condition.
Potential buyers are encouraged to inspect the boiler and its accessories prior to purchase. The buyer is responsible for securing the load and transportation. This equipment is sold AS IS without any warranty.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 4 |
| Last activity | Oct. 30, 2026 |
Offer Title: 200 Horsepower Steam Boiler 1975 600 PSI Low Hours - Vapor Power Coil Type in Fair Condition
Manufacturer: Vapor Power
Model: KR2 -P4748-YHK
Year of Manufacture: 1975
Working Hours: Fewer than 1500 hours
Technical Condition: As-is, where-is
State: Visible
Description:
This 200 horsepower Vapor Power Modulatic steam boiler is designed for a maximum pressure of 600 PSIG. It features a propane/natural gas burner and includes a new duplex water softener that has only been used for 5 days. The boiler was originally delivered to a laboratory in Pittsburgh, PA, in 1975 and has seen minimal use, primarily for enhanced oil recovery in Oklahoma, operating only one week per year during new well drilling.
The boiler comes equipped with a steam separator, John Bean triplex pump, relief valve, motor, valves, chemical feed pumps, and breeching. The burner nozzle is currently set for propane but can be converted to natural gas or diesel. The gas train and water flow controls require repair, and the diesel components have been removed but are available.
The coil section is in fair condition and can be utilized to replace damaged coils in another Modulatic boiler. All valves, the steam separator, and pump are also in fair condition.
Potential buyers are encouraged to inspect the boiler and its accessories prior to purchase. The buyer is responsible for securing the load and transportation. This equipment is sold AS IS without any warranty.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Industrial boilers |
| Engine Power | 200 kW |
| Pressure | 600 bar |
| Fuel | natural gas |
| worked hours | 1500 hours |
| hours under power | 1500 hours |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Datasheet | Vapor Power KR2 -P4748-YHK |
| Last availability date | 28/04/2026 |
| Product id | P260202167 |
| Language |
Manufacturer: Vapor Power
Model: KR2-P4748-YHK
Year of Manufacture: 1975
Engine Power: 200.0 kW
Maximum Pressure: 600 bar
Fuel Type: Natural gas (burner nozzle currently set for propane but convertible)
Description:
This industrial steam boiler from Vapor Power delivers 200 horsepower and is designed for a maximum operating pressure of 600 bar. Manufactured in 1975, it has seen limited use with fewer than 1500 hours of operation. Originally supplied to a laboratory in Pittsburgh, PA, the boiler was primarily used in enhanced oil recovery operations in Oklahoma, functioning approximately one week per year during new well drilling.
The boiler is equipped with a coil type design and includes several key components such as a steam separator, John Bean triplex pump, relief valve, motor, valves, chemical feed pumps, and breeching. It features an electric motor mounted on the assembly and a control panel with gauges and safety warning labels including 'Danger High Voltage' and 'Danger Open Disconnect'. Multiple pipes and valves are connected to the boiler, all showing signs of wear, surface rust, and dust accumulation consistent with its age and usage.
The coil section and associated valves, steam separator, and pump are in fair condition and may be suitable for replacing damaged parts in a similar Modulatic boiler. The burner nozzle is set for propane but can be converted for natural gas or diesel fuel. Note that the gas train and water flow controls require repair, and diesel components have been removed but remain available.
Potential buyers should inspect the boiler and its accessories prior to purchase. The equipment is sold as-is, where-is, without warranty. The buyer is responsible for load securing and transportation arrangements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 4 |
| Last activity | Oct. 30, 2026 |