| Manufacturer | UTAS |
|---|---|
| Model | GR4 |
| Year | |
| Location | Italy
|
| Category | Forging - Hydraulic presses |
| Power in tons | 20 T |
| Type | H-Frame |
| Table length | 1600 mm |
| Table width | 2000 mm |
| Engine Power | 30 kW |
| Length x width x height | 5260.0 × 2920.0 × 4280.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 12/11/2026 |
| Product id | P260723046 |
| Language |
Хидравлична преса UTAS GR4
Hydraulický lis UTAS GR4
UTAS GR4 Hydraulisk presse
UTAS GR4 Hydraulische Presse
Υδραυλική πρέσα UTAS GR4
UTAS GR4 Hydraulic press
Prensa hidráulica UTAS GR4
Presse hydraulique UTAS GR4
Hidraulična preša UTAS GR4
UTAS GR4 Hidraulikus prés
Pressa idraulica UTAS GR4
UTAS GR4 Hidraulinis presas
UTAS GR4 Hydraulische pers
Prasa hydrauliczna UTAS GR4
Prensa hidráulica UTAS GR4
Presă hidraulică UTAS GR4
UTAS GR4 Гидравлический пресс
Hidraulična presa UTAS GR4
UTAS GR4 Hydraulpress
Hidrolik pres UTAS GR4
|
Overview
This listing describes a UTAS GR4 press intended for mold testing, categorized under forging / hydraulic presses. The unit is specified with a large working table and heavy-duty capacities suited for pressing and mold-related operations. The technical details below reflect the information provided; purchasers should verify all specifications before purchase.
Working area and table
- Table size: 1600 x 2000 mm (62.99 x 78.74 in)
- Maximum distance between tables: 1500 mm (59.06 in)
- Minimum distance between tables: 400 mm (15.75 in)
- Upper table tilt: 110°
Load and force capacities
- Maximum weight on lower table: 40,000 kg
- Maximum weight on upper table: 15,000 kg
- Maximum closing force: 200 kN
Machine size and power
- Machine dimensions: 5260 x 2920 x 4280 mm (207.09 x 114.96 x 168.50 in)
- Total installed power: 30 kW
Notes and recommendations
- The data presented here is taken from the supplied technical specifications. Due to the complexity of industrial equipment, these figures may be incomplete or require confirmation. Buyers are recommended to inspect the machine in person, request documentation, and confirm the specifications and condition with the seller prior to purchase.
- No claims are made here regarding operational status, testing, refurbishment, or warranty. Any information about functionality or condition must be obtained directly from the seller or accompanying documentation.
If you would like, I can reformat this information into a short spec table for the listing or draft a buyer checklist to use when inspecting the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
WORKING AREA
Table Size
1600x2000 mm62.99x78.74 in
Maximum distance between tables
1500 mm59.06 in
Minimum distance between tables
400 mm15.75 in
Upper table tilt
110 °
Maximum weight on lower table
40000 Kg
Maximum weight on upper table
15000 Kg
Maximum closing force
200 kN
EXTRA
Machine dimensions
5260x2920x4280 mm207.09x114.96x168.50 in
Total installed power
30 Kw
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 188 |
| Last activity | Nov. 14, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
WORKING AREA
Table Size
1600x2000 mm62.99x78.74 in
Maximum distance between tables
1500 mm59.06 in
Minimum distance between tables
400 mm15.75 in
Upper table tilt
110 °
Maximum weight on lower table
40000 Kg
Maximum weight on upper table
15000 Kg
Maximum closing force
200 kN
EXTRA
Machine dimensions
5260x2920x4280 mm207.09x114.96x168.50 in
Total installed power
30 Kw
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Hydraulic presses |
| Power in tons | 20 T |
| Type | H-Frame |
| Table length | 1600 mm |
| Table width | 2000 mm |
| Engine Power | 30 kW |
| Length x width x height | 5260.0 × 2920.0 × 4280.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 12/11/2026 |
| Product id | P260723046 |
| Language |
Хидравлична преса UTAS GR4
Hydraulický lis UTAS GR4
UTAS GR4 Hydraulisk presse
UTAS GR4 Hydraulische Presse
Υδραυλική πρέσα UTAS GR4
UTAS GR4 Hydraulic press
Prensa hidráulica UTAS GR4
Presse hydraulique UTAS GR4
Hidraulična preša UTAS GR4
UTAS GR4 Hidraulikus prés
Pressa idraulica UTAS GR4
UTAS GR4 Hidraulinis presas
UTAS GR4 Hydraulische pers
Prasa hydrauliczna UTAS GR4
Prensa hidráulica UTAS GR4
Presă hidraulică UTAS GR4
UTAS GR4 Гидравлический пресс
Hidraulična presa UTAS GR4
UTAS GR4 Hydraulpress
Hidrolik pres UTAS GR4
|
Overview
This listing describes a UTAS GR4 press intended for mold testing, categorized under forging / hydraulic presses. The unit is specified with a large working table and heavy-duty capacities suited for pressing and mold-related operations. The technical details below reflect the information provided; purchasers should verify all specifications before purchase.
Working area and table
- Table size: 1600 x 2000 mm (62.99 x 78.74 in)
- Maximum distance between tables: 1500 mm (59.06 in)
- Minimum distance between tables: 400 mm (15.75 in)
- Upper table tilt: 110°
Load and force capacities
- Maximum weight on lower table: 40,000 kg
- Maximum weight on upper table: 15,000 kg
- Maximum closing force: 200 kN
Machine size and power
- Machine dimensions: 5260 x 2920 x 4280 mm (207.09 x 114.96 x 168.50 in)
- Total installed power: 30 kW
Notes and recommendations
- The data presented here is taken from the supplied technical specifications. Due to the complexity of industrial equipment, these figures may be incomplete or require confirmation. Buyers are recommended to inspect the machine in person, request documentation, and confirm the specifications and condition with the seller prior to purchase.
- No claims are made here regarding operational status, testing, refurbishment, or warranty. Any information about functionality or condition must be obtained directly from the seller or accompanying documentation.
If you would like, I can reformat this information into a short spec table for the listing or draft a buyer checklist to use when inspecting the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 188 |
| Last activity | Nov. 14, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
EN
- Languages
English (GB)