Contact us to receive an offer.
| Manufacturer | Uniloy Milacron |
|---|---|
| Model | UMA 35-90-4 |
| Year | 1997 |
| Location | Germany
|
The Uniloy Milacron UMA 35-90-4 is an industrial blowmoulding machine manufactured in 1997. It features a robust design with a closing force of approximately 350 kN (about 35 metric tons), suitable for various blowmoulding applications. The machine is equipped with an extrusion head, specifically the Accu 6 liter model, and includes an extruder type S 90/24D. Control of the machine is currently managed via a PLC system, with the option to install a new B&R control system tailored for this model, which can be added at short notice along with hydraulic pumps.
The machine shows signs of use, including wear and dirt accumulation on surfaces, but remains structurally intact. Several components are visible, including two large horizontal cylinders likely part of the clamping unit, multiple hydraulic and electrical cables and hoses along the base and middle sections, and motor and pump assemblies on the right side. Safety features include yellow metal mesh guards covering the central part of the machine, as well as yellow safety railings and stairs providing operator access to the top platform.
The electrical system includes an open cabinet with multiple switches, wiring, relays, and connectors, which appear organized and intact. Hydraulic valve assemblies with solenoid valves and connected hoses are also present, though some rust and dirt are visible around the base of these components. The oil tank and lines have been cleaned, and cabling has been partially replaced and revised to maintain functionality.
Additional features include a large metal hopper with a blue band near the top for material feeding, electric motor and gearbox mounted on the platform, and metal ducting piping running across the machine. A warning sticker is present on the machine body below the hydraulic valve assembly. The machine is located in Southern Europe and is immediately available. Pricing is available upon request, with payment required 100% prior to shipment. The right of prior sale is reserved. Details are based on information provided by the owner; no independent inspection has been conducted.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type
UMA 35-90-4
Hersteller / make: Uniloy Milacron
Baujahr / year 1997
Extruder S 90/24D
Steuerung / control: PLC
neue B&R-Steuerung möglich / new control B&R can be installed
Schlauchkopf / extrusion head Accu 6 ltr
Schließkraft / closing force 350, kN / approx 35 metric tons
Formenmaße / mold dimensions mm Länge x Breite / length x width =
Weitere Infos / additional info
Cables partially replaced, oil tank and lines cleaned
B&R control for this machine is prepared and can be installed at short notice, hydraulic pumps as well
Cabling revised, oil tanks and tubes cleaned and revised. New B&R-control tailored for this machine, ready for installation as well as hydraulic pumps
Standort / location Southern Europe
Preis / price Auf Anfrage / on request
Zahlung / payment 100% vor Verladung / prior to shipment
Right of prior sale reserved
Right of prior sale reserved
Details are based on information from the seller. No own inspection
Information was given by the owner.
No own inspection was made
Immediately available Immediately available
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this Uniloy Milacron UMA 35-90-4 manufactured?
This Uniloy Milacron UMA 35-90-4 blow molding machine was manufactured in 1997.
What is the condition of the machine?
This equipment is in good condition with partial refurbishment and a new Beckhoff control system.
Have new cables been installed on the machine?
The machine has been equipped with new cables.
Where is this Uniloy Milacron UMA 35-90-4 currently stored?
This Uniloy Milacron UMA 35-90-4 blow molding machine is currently stored at the company performing the refurbishment.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 29 |
| Last activity | Oct. 29, 2026 |
Type
UMA 35-90-4
Hersteller / make: Uniloy Milacron
Baujahr / year 1997
Extruder S 90/24D
Steuerung / control: PLC
neue B&R-Steuerung möglich / new control B&R can be installed
Schlauchkopf / extrusion head Accu 6 ltr
Schließkraft / closing force 350, kN / approx 35 metric tons
Formenmaße / mold dimensions mm Länge x Breite / length x width =
Weitere Infos / additional info
Cables partially replaced, oil tank and lines cleaned
B&R control for this machine is prepared and can be installed at short notice, hydraulic pumps as well
Cabling revised, oil tanks and tubes cleaned and revised. New B&R-control tailored for this machine, ready for installation as well as hydraulic pumps
Standort / location Southern Europe
Preis / price Auf Anfrage / on request
Zahlung / payment 100% vor Verladung / prior to shipment
Right of prior sale reserved
Right of prior sale reserved
Details are based on information from the seller. No own inspection
Information was given by the owner.
No own inspection was made
Immediately available Immediately available
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this Uniloy Milacron UMA 35-90-4 manufactured?
This Uniloy Milacron UMA 35-90-4 blow molding machine was manufactured in 1997.
What is the condition of the machine?
This equipment is in good condition with partial refurbishment and a new Beckhoff control system.
Have new cables been installed on the machine?
The machine has been equipped with new cables.
Where is this Uniloy Milacron UMA 35-90-4 currently stored?
This Uniloy Milacron UMA 35-90-4 blow molding machine is currently stored at the company performing the refurbishment.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Uniloy Milacron UMA 35-90-4 is an industrial blowmoulding machine manufactured in 1997. It features a robust design with a closing force of approximately 350 kN (about 35 metric tons), suitable for various blowmoulding applications. The machine is equipped with an extrusion head, specifically the Accu 6 liter model, and includes an extruder type S 90/24D. Control of the machine is currently managed via a PLC system, with the option to install a new B&R control system tailored for this model, which can be added at short notice along with hydraulic pumps.
The machine shows signs of use, including wear and dirt accumulation on surfaces, but remains structurally intact. Several components are visible, including two large horizontal cylinders likely part of the clamping unit, multiple hydraulic and electrical cables and hoses along the base and middle sections, and motor and pump assemblies on the right side. Safety features include yellow metal mesh guards covering the central part of the machine, as well as yellow safety railings and stairs providing operator access to the top platform.
The electrical system includes an open cabinet with multiple switches, wiring, relays, and connectors, which appear organized and intact. Hydraulic valve assemblies with solenoid valves and connected hoses are also present, though some rust and dirt are visible around the base of these components. The oil tank and lines have been cleaned, and cabling has been partially replaced and revised to maintain functionality.
Additional features include a large metal hopper with a blue band near the top for material feeding, electric motor and gearbox mounted on the platform, and metal ducting piping running across the machine. A warning sticker is present on the machine body below the hydraulic valve assembly. The machine is located in Southern Europe and is immediately available. Pricing is available upon request, with payment required 100% prior to shipment. The right of prior sale is reserved. Details are based on information provided by the owner; no independent inspection has been conducted.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 29 |
| Last activity | Oct. 29, 2026 |
Раздувна машина Uniloy Milacron UMA 35-90-4
Vyfukovací stroj Uniloy Milacron UMA 35-90-4
Uniloy Milacron UMA 35-90-4 Blæsestøbemaskine
Uniloy Milacron UMA 35-90-4 Blasformenmaschine
Μηχανή φυσητήρας Uniloy Milacron UMA 35-90-4
Uniloy Milacron UMA 35-90-4 Blowmoulding machine
Sopladora de plástico Uniloy Milacron UMA 35-90-4
Souffleuse plastique Uniloy Milacron UMA 35-90-4
Stroj za puhanje Uniloy Milacron UMA 35-90-4
Uniloy Milacron UMA 35-90-4 Fúvógép
Macchina soffiatrice Uniloy Milacron UMA 35-90-4
Pūtimo mašina Uniloy Milacron UMA 35-90-4
Uniloy Milacron UMA 35-90-4 Blaasmachine
Rozdmuchiwarka do plastiku Uniloy Milacron UMA 35-90-4
Máquina de moldagem por sopro Uniloy Milacron UMA 35-90-4
Mașină de suflat Uniloy Milacron UMA 35-90-4
Uniloy Milacron UMA 35-90-4 Вакуум-формовочная машина
Mašina za duvanje Uniloy Milacron UMA 35-90-4
Uniloy Milacron UMA 35-90-4 Formblåsningsmaskin
Hava üflemeli şekillendirme makinesi Uniloy Milacron UMA 35-90-4
EN
- Languages
English (GB)