Contact us to receive an offer.
| Manufacturer | Tripet |
|---|---|
| Model | MAR200 |
| Year | |
| Location | Switzerland
|
The Tripet MAR200 is a versatile cylindrical grinding machine designed for both external and internal grinding applications. It offers a maximum grinding diameter ranging from 1 to 60 mm and a grinding length capacity between 3 and 200 mm, with a maximum grinding length of 420 mm. The machine features a longitudinal hydraulic slide motion of 420 mm and a work head position adjustment of 200 mm on the bench, allowing precise control over the grinding process. Transversal movements include a grinding quill travel of 25 mm and a headstock adjustment range of 70 mm, complemented by an automatic feed of 72 mm for the work headstock and a swivel range of 90 degrees for versatile positioning.
Spindle speeds vary to accommodate different grinding needs, with the work headstock operating between 150 and 1500 RPM. Internal grinding quills offer high speeds of 16,500, 22,000, and 33,000 RPM, while the JS 80 air turbine reaches speeds up to 80,000 RPM. The face grinding attachment operates at 7,000 RPM. Grinding wheels compatible with the machine include the UJ 50 quill (Ø 10-40 mm), an air spindle (Ø 0.8-10 mm), and a face grinding device (Ø 75x40x10 mm).
The automatic feed system provides fine adjustments from 0.001 to 0.01 mm, enhancing grinding precision. The work headstock accepts W20 collets, and the machine is equipped with several chucks: 3-jaw chucks of Ø 130 mm and Ø 160 mm, a 4-jaw chuck of Ø 160 mm, and a faceplate with T-slots and threaded bolt holes. Additional features include an internal grinding head suitable for bores between Ø 12-60 mm, automatic grinding wheel protection, a semi-automatic dressing system, and air and oil mist controllers.
The machine comes with a face grinding device, quick lever chucking attachment, support for air turbine quills, coolant protection, and a layer filter system. The set of grinding heads and two UJ 50 quills expand its operational capabilities.
Visually, the machine is painted green and is mounted on a wooden pallet, indicating readiness for transport or installation. It includes a control panel with multiple buttons and knobs located on the front lower section for operational control. The grinding wheel is mounted on the right side with a protective cover, and a tailstock is positioned on the left side to support the workpiece during grinding. The machine appears used but clean, with no visible damage, suggesting it has been maintained in good condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity
Grinding diameter :1-60 mm
Grinding length 3-200 mm
Hauteur de pointes :132 mm
Slide motions
Longitudinal hydraulic : 420 mm
Longitudinal work head position on the bench : 200 mm
Transversal grinding quill : 25 mm
Transversale headstock adjustment : 70 mm
Work headstock automatic feed: 72 mm
Swivel range of headstock : 90°
Spindles speeds
Work headstock : 150 - 1500 RPM
Internal grinding quills : 16'500, 22'000, 33'000 RPM
JS 80 air turbine : 80'000 RPM
Face grinding attachment : 7'000 RPM
Grinding wheels
Quill UJ 50 : Ø 10-40 mm
Broche à air Ø 0.8-10 mm
Face grinding device : Ø 75x40x10 mm
Automatic feed : 0.001-0.01 mm
Work headstock : pinces W20
Composition
Internal grinding head : bores Ø 12-60 mm
Automatic protection of the grinding wheel
Semi-automatic grinding wheel dressing system
Air and oil mist controller
Face grinding device
Quick lever chucking attachment
Support for air turbine quills
Air turbine quill : JS 80 : 80'000 RPM
Work headstock
2 quills UJ 50
Coolant protection
Layer filter system
Chuck 3 jaws Ø 130 mm
Chuck 3 jaws Ø 160 mm
Chuck 4 jaws Ø 160 mm
Face plate with t-slots and threaded bolt holes
Set of grinding heads
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 42 |
| Last activity | Nov. 7, 2026 |
Capacity
Grinding diameter :1-60 mm
Grinding length 3-200 mm
Hauteur de pointes :132 mm
Slide motions
Longitudinal hydraulic : 420 mm
Longitudinal work head position on the bench : 200 mm
Transversal grinding quill : 25 mm
Transversale headstock adjustment : 70 mm
Work headstock automatic feed: 72 mm
Swivel range of headstock : 90°
Spindles speeds
Work headstock : 150 - 1500 RPM
Internal grinding quills : 16'500, 22'000, 33'000 RPM
JS 80 air turbine : 80'000 RPM
Face grinding attachment : 7'000 RPM
Grinding wheels
Quill UJ 50 : Ø 10-40 mm
Broche à air Ø 0.8-10 mm
Face grinding device : Ø 75x40x10 mm
Automatic feed : 0.001-0.01 mm
Work headstock : pinces W20
Composition
Internal grinding head : bores Ø 12-60 mm
Automatic protection of the grinding wheel
Semi-automatic grinding wheel dressing system
Air and oil mist controller
Face grinding device
Quick lever chucking attachment
Support for air turbine quills
Air turbine quill : JS 80 : 80'000 RPM
Work headstock
2 quills UJ 50
Coolant protection
Layer filter system
Chuck 3 jaws Ø 130 mm
Chuck 3 jaws Ø 160 mm
Chuck 4 jaws Ø 160 mm
Face plate with t-slots and threaded bolt holes
Set of grinding heads
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Tripet MAR200 is a versatile cylindrical grinding machine designed for both external and internal grinding applications. It offers a maximum grinding diameter ranging from 1 to 60 mm and a grinding length capacity between 3 and 200 mm, with a maximum grinding length of 420 mm. The machine features a longitudinal hydraulic slide motion of 420 mm and a work head position adjustment of 200 mm on the bench, allowing precise control over the grinding process. Transversal movements include a grinding quill travel of 25 mm and a headstock adjustment range of 70 mm, complemented by an automatic feed of 72 mm for the work headstock and a swivel range of 90 degrees for versatile positioning.
Spindle speeds vary to accommodate different grinding needs, with the work headstock operating between 150 and 1500 RPM. Internal grinding quills offer high speeds of 16,500, 22,000, and 33,000 RPM, while the JS 80 air turbine reaches speeds up to 80,000 RPM. The face grinding attachment operates at 7,000 RPM. Grinding wheels compatible with the machine include the UJ 50 quill (Ø 10-40 mm), an air spindle (Ø 0.8-10 mm), and a face grinding device (Ø 75x40x10 mm).
The automatic feed system provides fine adjustments from 0.001 to 0.01 mm, enhancing grinding precision. The work headstock accepts W20 collets, and the machine is equipped with several chucks: 3-jaw chucks of Ø 130 mm and Ø 160 mm, a 4-jaw chuck of Ø 160 mm, and a faceplate with T-slots and threaded bolt holes. Additional features include an internal grinding head suitable for bores between Ø 12-60 mm, automatic grinding wheel protection, a semi-automatic dressing system, and air and oil mist controllers.
The machine comes with a face grinding device, quick lever chucking attachment, support for air turbine quills, coolant protection, and a layer filter system. The set of grinding heads and two UJ 50 quills expand its operational capabilities.
Visually, the machine is painted green and is mounted on a wooden pallet, indicating readiness for transport or installation. It includes a control panel with multiple buttons and knobs located on the front lower section for operational control. The grinding wheel is mounted on the right side with a protective cover, and a tailstock is positioned on the left side to support the workpiece during grinding. The machine appears used but clean, with no visible damage, suggesting it has been maintained in good condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 42 |
| Last activity | Nov. 7, 2026 |
Машина за външно/вътрешно шлайфане на цилиндри Tripet MAR200
Hrotová bruska TRIPET MAR200
Tripet MAR200 Cylindrisk udvendig / indvendig slibemaskine
TRIPET MAR200 Rundschleifmaschine
Κυλινδρική εξωτερική / εσωτερική μηχανή λείανσης Tripet MAR200
TRIPET MAR200 Cylindrical grinding machine
Rectificadora cilíndrica TRIPET MAR200
Rectifieuse cylindrique TRIPET MAR200
Cilindrični vanjski / unutarnji stroj za brušenje Tripet MAR200
Tripet MAR200 Hengeres külső / belső csiszológép
Rettificatrice cilindrica TRIPET MAR200
Cilindrinė išorinė / vidinė šlifavimo mašina Tripet MAR200
Tripet MAR200 Cilindrische uitwendige/inwendige slijpmachine
Szlifierka do wałków/otworów TRIPET MAR200
Retificadora cilíndrica externa/interna Tripet MAR200
Mașină de șlefuit exterior/intern cilindric Tripet MAR200
TRIPET MAR200 Круглошлифовальный станок
Cilindrična mašina za spoljašnje / unutrašnje brušenje Tripet MAR200
Tripet MAR200 Cylindrisk utvändig / invändig slipmaskin
Silindirik taşlama makinesi TRIPET MAR200
EN
- Languages
English (GB)