Contact us to receive an offer.
| Manufacturer | Triapex |
|---|---|
| Model | HNXB6 |
| Year | 2007 |
| Location | Poland
|
This listing is for a Triapex HNXB6 multi-row vertical thermoforming machine designed for filling loose products such as instant coffee into stick-type sachets. The machine was manufactured in 2007 and features a robust metal frame with transparent protective panels that allow visibility of internal components and piping. It is equipped with multiple access doors featuring black handles, facilitating maintenance and operation. A control box with various buttons and switches is mounted on the right side, including a control panel with a blue display screen for operational management.
The HNXB6 model forms six sachets simultaneously (6-row machine) using tubes with a diameter of 25 mm, producing sachets 40 mm wide. The sachet length is adjustable within a range from 30 mm up to 180 mm. The machine operates at an efficiency of 30 cycles per minute for sachets of 150 mm length, resulting in a production capacity of up to 180 sticks per minute. It utilizes screw dispensers driven by servo motors, allowing precise regulation of the product quantity by adjusting the screw rotation speed.
The machine supports foil rolls with a maximum diameter of 600 mm and an inner roll diameter of 76 mm. It requires a power supply of 4.5 kVA, 3 x 400 V, 50 Hz, and compressed air at 0.5 to 0.8 MPa with a maximum consumption of 300 liters per minute.
Additional features observed include a warning sign labeled "STREFA 21" on the upper right corner, a conveyor or chute system connected on the left side, and an attached metal ladder or steps for access. The machine is clean and well-maintained with no visible damage and is situated indoors on a factory floor with yellow safety markings and tiled flooring. Overhead pipes and factory lighting are also present in the environment around the machine.
Two units are available, with production years 2004 and 2007 respectively.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used multi-row vertical machine for filling loose products (instant coffee, etc.) into stick-type sachets by Triapex, model HNXB6. Year of production: 2007.
Description of the machines:
- 6-row machine (forms 6 sticks at the same time)
- machine equipped with tubes with a diameter of 25 mm - forms sachets with a width of 40 mm (possibility to order from the manufacturer of tubes with diameters from 10 to 50 mm)
- adjustable sachet length in range from 30 to 180mm
- efficiency 30 cycles per minute (for a sachet length of 150mm); 30 cycles x 6 = 180 sticks per minute
- screw dispensers with servo drives - regulation of the amount of product fed by changing the number of screw revolutions
- foil roll parameters: maximum roll diameter 600mm (the rolls we use have a diameter of 450mm); inner diameter of the roll (thimble) is 76mm
- power supply parameters: input power 4.5kVA, 3 x 400V, 50Hz; air pressure 0.5 - 0.8MPa, maximum air consumption 300l/min
2 pieces available:
- first year of production 2004
- second year of production 2007
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 39 |
| Last activity | Nov. 5, 2026 |
Used multi-row vertical machine for filling loose products (instant coffee, etc.) into stick-type sachets by Triapex, model HNXB6. Year of production: 2007.
Description of the machines:
- 6-row machine (forms 6 sticks at the same time)
- machine equipped with tubes with a diameter of 25 mm - forms sachets with a width of 40 mm (possibility to order from the manufacturer of tubes with diameters from 10 to 50 mm)
- adjustable sachet length in range from 30 to 180mm
- efficiency 30 cycles per minute (for a sachet length of 150mm); 30 cycles x 6 = 180 sticks per minute
- screw dispensers with servo drives - regulation of the amount of product fed by changing the number of screw revolutions
- foil roll parameters: maximum roll diameter 600mm (the rolls we use have a diameter of 450mm); inner diameter of the roll (thimble) is 76mm
- power supply parameters: input power 4.5kVA, 3 x 400V, 50Hz; air pressure 0.5 - 0.8MPa, maximum air consumption 300l/min
2 pieces available:
- first year of production 2004
- second year of production 2007
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Triapex HNXB6 multi-row vertical thermoforming machine designed for filling loose products such as instant coffee into stick-type sachets. The machine was manufactured in 2007 and features a robust metal frame with transparent protective panels that allow visibility of internal components and piping. It is equipped with multiple access doors featuring black handles, facilitating maintenance and operation. A control box with various buttons and switches is mounted on the right side, including a control panel with a blue display screen for operational management.
The HNXB6 model forms six sachets simultaneously (6-row machine) using tubes with a diameter of 25 mm, producing sachets 40 mm wide. The sachet length is adjustable within a range from 30 mm up to 180 mm. The machine operates at an efficiency of 30 cycles per minute for sachets of 150 mm length, resulting in a production capacity of up to 180 sticks per minute. It utilizes screw dispensers driven by servo motors, allowing precise regulation of the product quantity by adjusting the screw rotation speed.
The machine supports foil rolls with a maximum diameter of 600 mm and an inner roll diameter of 76 mm. It requires a power supply of 4.5 kVA, 3 x 400 V, 50 Hz, and compressed air at 0.5 to 0.8 MPa with a maximum consumption of 300 liters per minute.
Additional features observed include a warning sign labeled "STREFA 21" on the upper right corner, a conveyor or chute system connected on the left side, and an attached metal ladder or steps for access. The machine is clean and well-maintained with no visible damage and is situated indoors on a factory floor with yellow safety markings and tiled flooring. Overhead pipes and factory lighting are also present in the environment around the machine.
Two units are available, with production years 2004 and 2007 respectively.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 39 |
| Last activity | Nov. 5, 2026 |
Термоформоване - Линия за формоване, пълнене и запечатване Triapex HNXB6
Tvarování termoplastů - Tvarující, plnící a uzavírací linka Triapex HNXB6
Triapex HNXB6 Termoformning - Form, fyld og forsegl linje
Triapex HNXB6 Thermoform Füll- und Schließanlage
Θερμοδιαμόρφωση - Γραμμή Μορφοποίησης, Γέμισης και Σφράγισης Triapex HNXB6
Triapex HNXB6 Thermoforming - Form, Fill and Seal Line
Termoformadora Triapex HNXB6
Ligne de formage remplissage operculage Triapex HNXB6
Termoformiranje - linija za oblikovanje, punjenje i brtvljenje Triapex HNXB6
Triapex HNXB6 Hőformázás - Formázás, töltés és lezárás vonal
Linea di formatura riempimento e opercolatrice Triapex HNXB6
Termoformavimas – formavimo, užpildymo ir sandarinimo linija Triapex HNXB6
Triapex HNXB6 Thermovormen - Vorm-, vul- en afdichtingslijn
Maszyna pakująca Triapex HNXB6
Termoformagem - Linha de Formar, Preencher e Selar Triapex HNXB6
Termoformare - linie de formare, umplere și etanșare Triapex HNXB6
Triapex HNXB6 Линия для формования, наполнения и запечатывания
Termoformiranje - linija za oblikovanje, punjenje i zaptivanje Triapex HNXB6
Triapex HNXB6 Termoformning - Forma, fylla och försegla linje
Şekillendirme, doldurma ve kapatma makinesi Triapex HNXB6
EN
- Languages
English (GB)