| Manufacturer | TOSHIBA |
|---|---|
| Model | BSF 34/23A (NC) |
| Year | 1979 |
| Location | Romania
|
This listing features a TOSHIBA BSF 34/23A (NC) floor type boring machine, manufactured in 1979 and overhauled in 2018. The machine is equipped with a milling spindle diameter of 340 mm and a boring spindle diameter of 230 mm, along with a high-speed spindle diameter of 100 mm. The milling spindle nose diameter measures 400 mm, and the boring spindle taper conforms to ISO No.60 standards.
The machine offers substantial travel capacities, including a ram travel of 1750 mm, boring spindle travel of 1500 mm, and a combined total travel of the ram and boring spindle of 3250 mm. The headstock has a vertical travel of 5000 mm, while the column provides a horizontal travel of 13000 mm.
Spindle speeds vary by spindle type, with the milling spindle operating between 2 to 400 rpm and the high-speed spindle capable of speeds from 5 up to 1000 rpm. Feed rates for the ram and boring spindle differ depending on the mode: in NC mode, feeds range from 1 to 3600 mm/min, while manual mode offers 24 steps between 2 and 1600 mm/min. Rapid traverse rates for both the ram and boring spindle reach up to 4200 mm/min. Similar feed rates and rapid traverse speeds apply to the headstock and column.
The spindle motor is a powerful DC motor rated at 90 kW, supporting spindle speeds of 900/2 and 600 rpm. Additional feed motors include FANUC model 50 units (10 kW) for both the boring spindle and ram, and FANUC model 60 H units (22 kW) for the headstock and column.
The machine features a large horizontal boring table equipped with T-slots for secure workpiece mounting. A vertical boring head with a substantial spindle housing is present, supporting various machining operations. The control panel is mounted on the side of the machine, facilitating operational control.
The machine appears clean and well-maintained, with no visible signs of rust or damage, indicating good overall condition suitable for industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Milling spindle diameter 340 mm
Boring spindle diameter 230 mm
High-speed spindle diameter 100 mm
Ram section 600 x 700 mm
Milling spindle nose diameter 400 mm
Boring spindle taper ISO No.60 (mm)
Ram travel 1750 mm
Boring spindle travel 1500 mm
Total travel of ram and boring spindle 3250 mm
Headstock vertical travel 5000 mm
Column horizontal travel 13000 mm
Spindle speed 2- 400 rpm
High-speed spindle speed 5-1000 rpm
Feed of ram and boring spindle (NC mode) 1-3600 mm/min
Feed of ram and boring spindle (Manual mode) 2-1600 mm/min (24 steps)
Rapid traverse of ram and boring spindle 4200 mm/min
Feed of headstock and column (NC mode) 1- 3600 mm/min
Feed of headstock and column (Manual mode) 2-1600 mm/min (24 steps)
Rapid traverse of headstock and column 4200 mm/min
Spindle Motor DC 90 kW, 900/2, 600 rpm
Feed motor for boring spindle FANUC model 50 (10 kW)
Feed motor for ram FANUC model 50 (10 kW)
Feed motor for headstock FANUC model 60 H (22 kW)
Feed motor for column FANUC model 60 H (22 kW)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this TOSHIBA BSF 34/23A (NC) last retrofitted?
This TOSHIBA BSF 34/23A (NC) floor type boring machine was retrofitted in 2018.
What year was this TOSHIBA BSF 34/23A (NC) manufactured?
This TOSHIBA BSF 34/23A (NC) floor type boring machine was manufactured in 1979.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2021 |
| Offers online | 7 |
| Last activity | Aug. 31, 2026 |
Milling spindle diameter 340 mm
Boring spindle diameter 230 mm
High-speed spindle diameter 100 mm
Ram section 600 x 700 mm
Milling spindle nose diameter 400 mm
Boring spindle taper ISO No.60 (mm)
Ram travel 1750 mm
Boring spindle travel 1500 mm
Total travel of ram and boring spindle 3250 mm
Headstock vertical travel 5000 mm
Column horizontal travel 13000 mm
Spindle speed 2- 400 rpm
High-speed spindle speed 5-1000 rpm
Feed of ram and boring spindle (NC mode) 1-3600 mm/min
Feed of ram and boring spindle (Manual mode) 2-1600 mm/min (24 steps)
Rapid traverse of ram and boring spindle 4200 mm/min
Feed of headstock and column (NC mode) 1- 3600 mm/min
Feed of headstock and column (Manual mode) 2-1600 mm/min (24 steps)
Rapid traverse of headstock and column 4200 mm/min
Spindle Motor DC 90 kW, 900/2, 600 rpm
Feed motor for boring spindle FANUC model 50 (10 kW)
Feed motor for ram FANUC model 50 (10 kW)
Feed motor for headstock FANUC model 60 H (22 kW)
Feed motor for column FANUC model 60 H (22 kW)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this TOSHIBA BSF 34/23A (NC) last retrofitted?
This TOSHIBA BSF 34/23A (NC) floor type boring machine was retrofitted in 2018.
What year was this TOSHIBA BSF 34/23A (NC) manufactured?
This TOSHIBA BSF 34/23A (NC) floor type boring machine was manufactured in 1979.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features a TOSHIBA BSF 34/23A (NC) floor type boring machine, manufactured in 1979 and overhauled in 2018. The machine is equipped with a milling spindle diameter of 340 mm and a boring spindle diameter of 230 mm, along with a high-speed spindle diameter of 100 mm. The milling spindle nose diameter measures 400 mm, and the boring spindle taper conforms to ISO No.60 standards.
The machine offers substantial travel capacities, including a ram travel of 1750 mm, boring spindle travel of 1500 mm, and a combined total travel of the ram and boring spindle of 3250 mm. The headstock has a vertical travel of 5000 mm, while the column provides a horizontal travel of 13000 mm.
Spindle speeds vary by spindle type, with the milling spindle operating between 2 to 400 rpm and the high-speed spindle capable of speeds from 5 up to 1000 rpm. Feed rates for the ram and boring spindle differ depending on the mode: in NC mode, feeds range from 1 to 3600 mm/min, while manual mode offers 24 steps between 2 and 1600 mm/min. Rapid traverse rates for both the ram and boring spindle reach up to 4200 mm/min. Similar feed rates and rapid traverse speeds apply to the headstock and column.
The spindle motor is a powerful DC motor rated at 90 kW, supporting spindle speeds of 900/2 and 600 rpm. Additional feed motors include FANUC model 50 units (10 kW) for both the boring spindle and ram, and FANUC model 60 H units (22 kW) for the headstock and column.
The machine features a large horizontal boring table equipped with T-slots for secure workpiece mounting. A vertical boring head with a substantial spindle housing is present, supporting various machining operations. The control panel is mounted on the side of the machine, facilitating operational control.
The machine appears clean and well-maintained, with no visible signs of rust or damage, indicating good overall condition suitable for industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2021 |
| Offers online | 7 |
| Last activity | Aug. 31, 2026 |
TOSHIBA BSF 34/23A (NC)
Desková vyvrtávačka TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC) Plattenbohrwerk
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC) Floor type boring machine (retrofitted in 2018)
Mandrinadora TOSHIBA BSF 34/23A (NC)
Aléseuse à montant mobile TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
Alesatrice a montante mobile TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
Używana wytaczarka TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC) Горизонтально-расточной станок
TOSHIBA BSF 34/23A (NC)
TOSHIBA BSF 34/23A (NC)
Zemin tipi borverk makinesi TOSHIBA BSF 34/23A (NC)
EN
- Languages
English (GB)