TOS VARNSDORF W100A Table type boring machine

Verified seller

13,000 €

Make an offer
Manufacturer TOS VARNSDORF
Model W100A
Year 1982
Location Portugal PT

Automatic description (AI-Generated)

TOS VARNSDORF W100A table-type boring/mandrel machine, manufactured 1982. Key machine specifications recorded: X axis travel 1600 mm, Y axis travel 1120 mm, Z axis travel 1250 mm, spindle diameter 100 mm. Manufacturer and model are shown on the machine nameplate.

Control and operator features: fitted with a Ditron D60-3V digital readout (DRO) display on an articulating arm and a secondary control/display panel with orange LED readouts. The main control face includes a large handwheel, multiple manual levers and selector handles, round pushbuttons including a red emergency stop and a green start, and two rotary selector dials with graduated plates and associated levers.

Table and slide assemblies: machine has a large T-slotted worktable mounted on a cross slide/dovetail assembly. The table underside shows slide bars/dovetail ways and two cylindrical guide rods for longitudinal support. Exposed lead screw and parallel guideways are present inside the bed.

Condition and accessories: there is accumulation of metal chips around the base, on slideways and in coolant/oil trough areas, and oil residue inside the bed cavity and on ways. Some surfaces show grime, paint flaking and surface rust, and the table slots and way surfaces display wear and discoloration; guideway surfaces show machining marks and use wear but appear intact. Electrical wiring and signal cables are routed through the bed cavity and several cables hang beneath the DRO arm with some loose ends.

Notes: items marked as wear, loose wiring, and residue will likely benefit from cleaning and inspection before use. Any observations of surface wear, corrosion or electrical connections should be verified during an in-person inspection.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Descrição
TOS VARNSDORF W100A mandriladora horizontal de mesa,
ano de fabrico 1982, visível na placa da máquina.
Especificações típicas da W100A:
spindle/fuso de 100 mm,
cone ISO 50,
curso X: 1600 mm,
curso Y: 1120 mm,
curso Z: 1250 mm,
curso W: 900 mm,
mesa rotativa de 1250 × 1250 mm.

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Machinery dealer
Active since 2008
Offers online 126
Last activity Nov. 18, 2026

Seller's description

Descrição
TOS VARNSDORF W100A mandriladora horizontal de mesa,
ano de fabrico 1982, visível na placa da máquina.
Especificações típicas da W100A:
spindle/fuso de 100 mm,
cone ISO 50,
curso X: 1600 mm,
curso Y: 1120 mm,
curso Z: 1250 mm,
curso W: 900 mm,
mesa rotativa de 1250 × 1250 mm.

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.



Automatic description (AI-Generated)

TOS VARNSDORF W100A table-type boring/mandrel machine, manufactured 1982. Key machine specifications recorded: X axis travel 1600 mm, Y axis travel 1120 mm, Z axis travel 1250 mm, spindle diameter 100 mm. Manufacturer and model are shown on the machine nameplate.

Control and operator features: fitted with a Ditron D60-3V digital readout (DRO) display on an articulating arm and a secondary control/display panel with orange LED readouts. The main control face includes a large handwheel, multiple manual levers and selector handles, round pushbuttons including a red emergency stop and a green start, and two rotary selector dials with graduated plates and associated levers.

Table and slide assemblies: machine has a large T-slotted worktable mounted on a cross slide/dovetail assembly. The table underside shows slide bars/dovetail ways and two cylindrical guide rods for longitudinal support. Exposed lead screw and parallel guideways are present inside the bed.

Condition and accessories: there is accumulation of metal chips around the base, on slideways and in coolant/oil trough areas, and oil residue inside the bed cavity and on ways. Some surfaces show grime, paint flaking and surface rust, and the table slots and way surfaces display wear and discoloration; guideway surfaces show machining marks and use wear but appear intact. Electrical wiring and signal cables are routed through the bed cavity and several cables hang beneath the DRO arm with some loose ends.

Notes: items marked as wear, loose wiring, and residue will likely benefit from cleaning and inspection before use. Any observations of surface wear, corrosion or electrical connections should be verified during an in-person inspection.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2008
Offers online 126
Last activity Nov. 18, 2026

Here is a selection of similar machines - TOS VARNSDORF W100A


Used TOS Horizontal Boring Mills for Sale

Browse used TOS horizontal boring mills on Exapro, including the WHN 13 and W 100 table-type series from TOS Varnsdorf. Filter listings by spindle diameter, table capacity, control, and year for proven Czech heavy machining at strong value.

TOS VARNSDORF W100A Table type boring machine