Used Torre Minipack FC 76 A Sealer

Verified seller

4,500 €

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer Torre
Model Minipack FC 76 A
Year 2015
Location Germany DE
Jérémie
Your dedicated contact
Jérémie R.

Automatic description (AI-Generated)

The Torre Minipack FC 76 A, manufactured in 2015, is a shrink wrapping machine designed for efficient and versatile packaging operations. It operates in both automatic and manual modes: in automatic mode, packaging cycles run sequentially with programmed pauses after pressing the start button, while in manual mode, a single packaging cycle is executed per start button press.

Key features include a motorized bell and a product ejection belt, facilitating smooth handling of items during packaging. The machine is equipped with a front interface featuring intuitive controls, including a control panel with three buttons—green for start, yellow, and a red emergency stop—allowing for straightforward operation and enhanced safety.

The sealing bar benefits from a cooling system that improves productivity and sealing quality. Safety is prioritized with controls for the sealing knives and a bell safety system to protect operators. An additional safety thermostat is installed directly on the heat accumulator's resistance, further increasing machine safety.

The reel holder accommodates larger film reels up to 250mm in diameter, and the packaging plate is independent of the reel holder, enabling the packaging of very small products using the same film reel. The machine offers micro-perforation for precise and continuous film perforation.

Its digital control panel supports six memorisable programs and includes a display with two digits for program settings and four digits for the piece counter, which is included as part of the equipment. The machine also features a powerful fan motor to enhance shrinking capacity and a neoprene tube holding profile that requires no gluing.

Additional practical features include a card access flap on the front and an extended grid plate that serves as a pallet protection storage opening. The machine includes a roller conveyor on the left side for efficient product feeding and a transparent film roll mounted at the bottom front.

Physically, the machine has an orange body labeled 'minipack' and model 'FG76A'. It appears clean and in good condition with no visible damage, indicating careful maintenance. This combination of features makes the Torre Minipack FC 76 A a reliable choice for various shrink wrapping needs.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

TECHNICAL FEATURES:

Work cycle in ‘Automatic’ (when the start button is pressed, cycles are executed in sequence with programmed pauses)
and also possible in ‘Manual’ (a single packaging cycle is executed when the start button is pressed)

Motorised bell and product ejection belt
Front interface with controls: intuitive programming
Cooling of the sealing bar: increased productivity and improved sealing
Innovative fixing of the upper bell
Safety control of the sealing knives: greater safety for the machine
Reel holder for larger reel diameter (250mm)
Packaging plate independent of reel holder: also suitable for packaging very small products with the same film reel
Micro-perforation: uninterrupted and precise perforation
Display: with 2 digits for programmes and settings and 4 digits for the piece counter
Digital, user-friendly control panel with 6 memorisable programmes
Piece counter included: more complete equipment
Card access with flap on the front
Extended grid plate: pallet protection storage opening
Powerful fan motor: higher shrinking capacity
Additional safety thermostat directly on the resistance of the heat accumulator: increased machine safety
Neoprene tube holding profile without gluing
Bell safety system: more safety for the operator

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Client type Machinery dealer
Active since 2014
Offers online 151
Last activity Nov. 14, 2026

Seller's description

TECHNICAL FEATURES:

Work cycle in ‘Automatic’ (when the start button is pressed, cycles are executed in sequence with programmed pauses)
and also possible in ‘Manual’ (a single packaging cycle is executed when the start button is pressed)

Motorised bell and product ejection belt
Front interface with controls: intuitive programming
Cooling of the sealing bar: increased productivity and improved sealing
Innovative fixing of the upper bell
Safety control of the sealing knives: greater safety for the machine
Reel holder for larger reel diameter (250mm)
Packaging plate independent of reel holder: also suitable for packaging very small products with the same film reel
Micro-perforation: uninterrupted and precise perforation
Display: with 2 digits for programmes and settings and 4 digits for the piece counter
Digital, user-friendly control panel with 6 memorisable programmes
Piece counter included: more complete equipment
Card access with flap on the front
Extended grid plate: pallet protection storage opening
Powerful fan motor: higher shrinking capacity
Additional safety thermostat directly on the resistance of the heat accumulator: increased machine safety
Neoprene tube holding profile without gluing
Bell safety system: more safety for the operator

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.



Automatic description (AI-Generated)

The Torre Minipack FC 76 A, manufactured in 2015, is a shrink wrapping machine designed for efficient and versatile packaging operations. It operates in both automatic and manual modes: in automatic mode, packaging cycles run sequentially with programmed pauses after pressing the start button, while in manual mode, a single packaging cycle is executed per start button press.

Key features include a motorized bell and a product ejection belt, facilitating smooth handling of items during packaging. The machine is equipped with a front interface featuring intuitive controls, including a control panel with three buttons—green for start, yellow, and a red emergency stop—allowing for straightforward operation and enhanced safety.

The sealing bar benefits from a cooling system that improves productivity and sealing quality. Safety is prioritized with controls for the sealing knives and a bell safety system to protect operators. An additional safety thermostat is installed directly on the heat accumulator's resistance, further increasing machine safety.

The reel holder accommodates larger film reels up to 250mm in diameter, and the packaging plate is independent of the reel holder, enabling the packaging of very small products using the same film reel. The machine offers micro-perforation for precise and continuous film perforation.

Its digital control panel supports six memorisable programs and includes a display with two digits for program settings and four digits for the piece counter, which is included as part of the equipment. The machine also features a powerful fan motor to enhance shrinking capacity and a neoprene tube holding profile that requires no gluing.

Additional practical features include a card access flap on the front and an extended grid plate that serves as a pallet protection storage opening. The machine includes a roller conveyor on the left side for efficient product feeding and a transparent film roll mounted at the bottom front.

Physically, the machine has an orange body labeled 'minipack' and model 'FG76A'. It appears clean and in good condition with no visible damage, indicating careful maintenance. This combination of features makes the Torre Minipack FC 76 A a reliable choice for various shrink wrapping needs.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2014
Offers online 151
Last activity Nov. 14, 2026

Here is a selection of similar machines - Torre Minipack FC 76 A

Used Torre Minipack FC 76 A Sealer