Contact us to receive an offer.
| Manufacturer | Thouet Lehmann |
|---|---|
| Model | STM 500 |
| Year | |
| Location | Germany
|
Thouet Lehmann STM 500 pin mill for grinding cocoa nibs into cocoa mass. The machine is described with a capacity of approximately 250 kg/h, depending on product properties, roast level, moisture content and nib size.
The mill has a pin-mill grinding head mounted on a stainless-steel frame, with a direct drive powered by a 30 kW motor running at 3,000 rpm and controlled by a frequency inverter. A screw dosing unit with a feed hopper supplies the nibs; its feed rate is frequency controlled. A metal magnet is fitted at the mill inlet. The grinding chamber has a large hinged/openable housing, and the machine includes a heated collection vessel beneath the mill and a product discharge pump. An integrated electric boiler provides heating, with temperature control and a cold-water feed for cooling if temperatures become too high. The system also includes a control cabinet.
The listed equipment updates include a new screw feeder, a double-walled cocoa-mass collection vessel with temperature and level control, an additional product pump, and heating for the machine, vessel and pump. The control cabinet is described as including soft starting, controls, monitoring and a power display.
Visible components include the upper hopper and feed assembly, blue drive units, motor and pump components, metal piping, braided flexible hoses, a handwheel and a control panel. The housing can be opened to access the cylindrical pin-equipped grinding chamber. Surface marks and discoloration are present on some metal surfaces; operational condition cannot be determined from appearance alone.
Dimensions: 2,200 × 1,000 × 2,400 mm (including feed system). Transport height is stated as a maximum of 1.8 m. Weight: approximately 2,900 kg. Cooling system: yes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
pin mill, mill
chocolate
for grinding cocoa nibs into cocoa mass
According to our calculations, the mill has a capacity of 250 kg/h of cocoa mass, depending on product properties, roast level, moisture content, nib size, etc.
consisting of:
welded stainless steel frame with a pin mill grinding head mounted on it
direct drive via a 30 kW motor running at 3,000 rpm, controlled by a frequency inverter
with screw dosing unit, including feed hopper, frequency-controlled
metal magnet at the mill inlet
heated collection vessel for the finished product beneath the mill
with product discharge pump
with integrated electric boiler for heating the mill
with temperature controller and cold-water feed for when temperatures are too high
with electrical control cabinet
The machine has been refurbished as follows:
- completely dismantled and cleaned, sandblasted, primed and painted (exterior)
- new mounting foundation for the drive motor
- new screw feeder for the product (nibs), with frequency-inverter control
- new collection vessel for the cocoa mass with temperature and level control,
double-walled for the cocoa mass
- including additional pump for pumping out the product (newly added)
- heating for the machine, collection vessel and pump
- new control cabinet for soft starting, with all controls and monitoring systems,
including power display, etc.
- tested in accordance with CE regulations, with corresponding certificate
Dimensions: 2,200 x 1,000 x 2,400 mm high (including feed system)
(transport height: max. 1.8 m)
ex our warehouse
You can find more pin mills here:
Capacity: 250 kg/h
Weight: approx. 2,900 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 592 |
| Last activity | Nov. 19, 2026 |
pin mill, mill
chocolate
for grinding cocoa nibs into cocoa mass
According to our calculations, the mill has a capacity of 250 kg/h of cocoa mass, depending on product properties, roast level, moisture content, nib size, etc.
consisting of:
welded stainless steel frame with a pin mill grinding head mounted on it
direct drive via a 30 kW motor running at 3,000 rpm, controlled by a frequency inverter
with screw dosing unit, including feed hopper, frequency-controlled
metal magnet at the mill inlet
heated collection vessel for the finished product beneath the mill
with product discharge pump
with integrated electric boiler for heating the mill
with temperature controller and cold-water feed for when temperatures are too high
with electrical control cabinet
The machine has been refurbished as follows:
- completely dismantled and cleaned, sandblasted, primed and painted (exterior)
- new mounting foundation for the drive motor
- new screw feeder for the product (nibs), with frequency-inverter control
- new collection vessel for the cocoa mass with temperature and level control,
double-walled for the cocoa mass
- including additional pump for pumping out the product (newly added)
- heating for the machine, collection vessel and pump
- new control cabinet for soft starting, with all controls and monitoring systems,
including power display, etc.
- tested in accordance with CE regulations, with corresponding certificate
Dimensions: 2,200 x 1,000 x 2,400 mm high (including feed system)
(transport height: max. 1.8 m)
ex our warehouse
You can find more pin mills here:
Capacity: 250 kg/h
Weight: approx. 2,900 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Thouet Lehmann STM 500 pin mill for grinding cocoa nibs into cocoa mass. The machine is described with a capacity of approximately 250 kg/h, depending on product properties, roast level, moisture content and nib size.
The mill has a pin-mill grinding head mounted on a stainless-steel frame, with a direct drive powered by a 30 kW motor running at 3,000 rpm and controlled by a frequency inverter. A screw dosing unit with a feed hopper supplies the nibs; its feed rate is frequency controlled. A metal magnet is fitted at the mill inlet. The grinding chamber has a large hinged/openable housing, and the machine includes a heated collection vessel beneath the mill and a product discharge pump. An integrated electric boiler provides heating, with temperature control and a cold-water feed for cooling if temperatures become too high. The system also includes a control cabinet.
The listed equipment updates include a new screw feeder, a double-walled cocoa-mass collection vessel with temperature and level control, an additional product pump, and heating for the machine, vessel and pump. The control cabinet is described as including soft starting, controls, monitoring and a power display.
Visible components include the upper hopper and feed assembly, blue drive units, motor and pump components, metal piping, braided flexible hoses, a handwheel and a control panel. The housing can be opened to access the cylindrical pin-equipped grinding chamber. Surface marks and discoloration are present on some metal surfaces; operational condition cannot be determined from appearance alone.
Dimensions: 2,200 × 1,000 × 2,400 mm (including feed system). Transport height is stated as a maximum of 1.8 m. Weight: approximately 2,900 kg. Cooling system: yes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 592 |
| Last activity | Nov. 19, 2026 |
| Belt width | 320 mm |
|---|
| Cooling System | Yes |
|---|
| Belt width | 320 mm |
|---|
| Belt width | 320 mm |
|---|
| Cooling System | Yes |
|---|
Germany
2014
| Belt width | mm |
|---|
| Cooling System | Yes |
|---|
| Belt width | 800 mm |
|---|
Germany