| Manufacturer | THERMO SCIENTIFIC |
|---|---|
| Model | 8000 WJ |
| Year | 2009 |
| Location | France
|
Thermo Scientific 8000 WJ Incubator / CO₂ Oven, model 3429, manufactured in 2009, is designed with water jacket (WJ) technology for precise environmental control. The unit features a capacity of 184 liters and supports a CO₂ concentration range from 0 to 20%, with a CO₂ inlet pressure of 103.4 kPa. It includes a CT CO₂ sensor to monitor gas levels accurately. Temperature can be controlled within a range of +5°C UT to +50°C.
The incubator is equipped with an internal HEPA filter to maintain air purity, although the filters will require replacement. The interior consists of four stainless steel perforated shelves, which are clean and undamaged, providing ample space for sample placement. A water container is included to support humidity control via the water jacket system. The interior door is made of glass, allowing easy observation without disturbing the internal environment.
The control panel is made of aluminum and features a digital display that currently indicates 'ADD WATER', suggesting the water jacket is empty and needs to be filled before use, following the manufacturer's instructions. The external dimensions are approximately 1000 mm in height, 660 mm in length, and 600 mm in width, with a net weight of 130 kg.
The equipment operates on 230V at 50/60Hz with a current rating of 2.00A. The unit appears clean and in good physical condition with no visible damage or wear on the exterior panels or interior components. It is delivered with the water jackets emptied, and it is essential to fill them prior to operation.
Please note, slight traces of rust were previously noted on the back of the outer casing, and the HEPA filters will need replacement. Buyers should consider these points when evaluating the unit for their laboratory needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Incubator / CO₂ oven 8000 WJ THERMO SCIENTIFIC
Water jacket (WJ) technology
Model 3429
Capacity: 184L
CO₂ range: 0 to 20%
CO₂ inlet pressure: 103.4 kPa.
CO₂ sensor: CT
Temperature range: +5°C UT to +50°C.
Internal HEPA filter.
Glass interior door.
Aluminum control panel with digital display.
4 stainless steel shelves
1 water container
External dimensions HxWxD: 100x66x60cm.
Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm.
230V 50/60Hz.
Net weight: 120.2 kg
Equipment tested at 37°C with a CO₂ level of 5%
In excellent working order and appearance.
Slight traces of rust on the back of the outer casing (see photos).
The HEPA filters will need to be replaced.
The equipment will be delivered with the water jackets emptied.
It is essential to fill them before using the equipment, following the manufacturer's recommendations.
Year of manufacture: 2009
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 107 |
| Last activity | Oct. 30, 2026 |
Incubator / CO₂ oven 8000 WJ THERMO SCIENTIFIC
Water jacket (WJ) technology
Model 3429
Capacity: 184L
CO₂ range: 0 to 20%
CO₂ inlet pressure: 103.4 kPa.
CO₂ sensor: CT
Temperature range: +5°C UT to +50°C.
Internal HEPA filter.
Glass interior door.
Aluminum control panel with digital display.
4 stainless steel shelves
1 water container
External dimensions HxWxD: 100x66x60cm.
Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm.
230V 50/60Hz.
Net weight: 120.2 kg
Equipment tested at 37°C with a CO₂ level of 5%
In excellent working order and appearance.
Slight traces of rust on the back of the outer casing (see photos).
The HEPA filters will need to be replaced.
The equipment will be delivered with the water jackets emptied.
It is essential to fill them before using the equipment, following the manufacturer's recommendations.
Year of manufacture: 2009
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Thermo Scientific 8000 WJ Incubator / CO₂ Oven, model 3429, manufactured in 2009, is designed with water jacket (WJ) technology for precise environmental control. The unit features a capacity of 184 liters and supports a CO₂ concentration range from 0 to 20%, with a CO₂ inlet pressure of 103.4 kPa. It includes a CT CO₂ sensor to monitor gas levels accurately. Temperature can be controlled within a range of +5°C UT to +50°C.
The incubator is equipped with an internal HEPA filter to maintain air purity, although the filters will require replacement. The interior consists of four stainless steel perforated shelves, which are clean and undamaged, providing ample space for sample placement. A water container is included to support humidity control via the water jacket system. The interior door is made of glass, allowing easy observation without disturbing the internal environment.
The control panel is made of aluminum and features a digital display that currently indicates 'ADD WATER', suggesting the water jacket is empty and needs to be filled before use, following the manufacturer's instructions. The external dimensions are approximately 1000 mm in height, 660 mm in length, and 600 mm in width, with a net weight of 130 kg.
The equipment operates on 230V at 50/60Hz with a current rating of 2.00A. The unit appears clean and in good physical condition with no visible damage or wear on the exterior panels or interior components. It is delivered with the water jackets emptied, and it is essential to fill them prior to operation.
Please note, slight traces of rust were previously noted on the back of the outer casing, and the HEPA filters will need replacement. Buyers should consider these points when evaluating the unit for their laboratory needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 107 |
| Last activity | Oct. 30, 2026 |
Инкубатор / пещ с CO2 8000 WJ THERMO SCIENTIFIC
Inkubátor / sušárna s CO2 8000 WJ THERMO SCIENTIFIC
Inkubator/CO2-ovn 8000 WJ THERMO SCIENTIFIC
Inkubator / CO2-Trockenschrank 8000 WJ THERMO SCIENTIFIC
Θερμοκοιτίδα / φούρνος CO2 8000 WJ THERMO SCIENTIFIC
CO2 incubator/oven 8000 WJ THERMO SCIENTIFIC
Incubadora/estufa con CO2 8000 WJ THERMO SCIENTIFIC
Incubateur / étuve à CO2 8000 WJ THERMO SCIENTIFIC
CO₂ inkubator/pećnica 8000 WJ THERMO SCIENTIFIC
Inkubátor / CO2-kemence 8000 WJ THERMO SCIENTIFIC
Incubatore / stufa a CO2 8000 WJ THERMO SCIENTIFIC
Inkubatorius / CO2 krosnelė 8000 WJ THERMO SCIENTIFIC
CO2-incubator/oven 8000 WJ THERMO SCIENTIFIC
Inkubator / piec CO2 8000 WJ THERMO SCIENTIFIC
Incubadora / estufa com CO2 8000 WJ THERMO SCIENTIFIC
Incubator / cuptor cu CO2 8000 WJ THERMO SCIENTIFIC
Инкубатор / печь с CO2 8000 WJ THERMO SCIENTIFIC
CO₂ inkubator/rerna 8000 WJ THERMO SCIENTIFIC
Inkubator/CO2-ugn 8000 WJ THERMO SCIENTIFIC
CO2 inkübatör / fırın 8000 WJ THERMO SCIENTIFIC
EN
- Languages
English (GB)