| Manufacturer | Tebel (Tetra Pak®) |
|---|---|
| Model | OST IV |
| Year | 1991 |
| Location | Netherlands
|
The Tebel OST IV is a closed cheese vat designed for cheese production, manufactured by Tebel (Tetra Pak®) in 1991. This model features a capacity of 8,000 liters and is double-jacketed, allowing for indirect temperature control of the milk inside the vat through the injection of steam or hot water. The vat is constructed primarily from stainless steel AISI 304, ensuring durability and hygiene, with the exception of the drive unit.
The vat includes an integrated stirring and cutting mechanism, where cutting tools are welded to a horizontal shaft. This shaft is powered by a drive unit equipped with a frequency converter, enabling variable speed control. Notably, the cutting tools rotate in the opposite direction during cutting compared to stirring. The coagulum is precisely cut by sharp radial knives made of stainless steel. Whey is removed through a perforated suction pipe that is lowered into the whey to just below the surface, facilitating efficient separation.
The vat is designed with a slight inclination of 4% towards the bottom valve, which allows for effective discharge of the curd through this valve. For cleaning, the vat is equipped with four rotating CIP (Clean-In-Place) nozzles located at the top, aiding thorough sanitation after production runs.
Additional control features include a stainless steel MCC panel located at the rear near the motor, housing the frequency converter, and a separate control panel mounted on top of the cheese vat for process management.
Two units of this model are available, identified by stock numbers #1005 and #1006. Both tanks are large stainless steel cylinders equipped with blue motorized components on the front side, and electrical control boxes with emergency stop buttons are mounted on the tanks. The tanks are supported on wooden blocks and have metal safety railings with mesh guards on associated platforms, enhancing operator safety.
The tanks exhibit some surface dirt, light wear, scuff marks, and minor discoloration, but no visible structural damage. The blue motors show signs of paint chipping and some rust spots. Coiled cables or hoses are attached to the motor components. Overall, these cheese vats present a robust design suitable for industrial cheese production processes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CHEESE MACHINES
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the motor, with frequency converter and a separate control panel on top of the cheese vat for controlling the process.
Additional features:
Set of 2x pieces available, Stocknumber #1005 and #1006.
Type Of Machine: Closed cheese vat
Capacity: 8.000 ltr
Double Jacketed: Yes
Whey Suction Device: Yes
Total Dimensions: 4,3 x 3,0 x 4,5 mtr
Weight: ± 3.200 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Tebel OST IV cheese vat manufactured?
This Tebel OST IV double jacketed closed cheese vat was manufactured in 1991.
Is this equipment second-hand?
This equipment is a second-hand machine.
What design features does this Tebel OST IV cheese vat have?
This Tebel OST IV cheese vat features a double jacketed design.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 167 |
| Last activity | Nov. 1, 2026 |
Hamburg Machinery is a leading player in the machinery manufacturing sector, based in Germany. With a rich heritage and a commitment to innovation, the company specializes in providing high-quality machinery solutions tailored to meet the diverse needs of various industries. Their extensive product range includes cutting-edge equipment designed for efficiency, reliability, and performance, ensuring that clients can achieve their operational goals with ease. At Hamburg Machinery, customer satisfaction is at the forefront of their mission. The company prides itself on its ability to deliver customized solutions that not only enhance productivity but also drive cost-effectiveness for businesses. Their team of experienced professionals works closely with clients to understand their unique requirements, providing expert guidance and support throughout the entire process. In addition to manufacturing, Hamburg Machinery is dedicated to sustainability and environmental responsibility. They continuously strive to implement eco-friendly practices in their operations, ensuring that their products contribute to a greener future. With a strong focus on research and development, the company is constantly evolving, integrating the latest technologies to stay ahead in a competitive market. Whether you are looking for advanced machinery for manufacturing, construction, or other industrial applications, Hamburg Machinery stands out as a trusted partner. Their commitment to quality, innovation, and customer service makes them a preferred choice for businesses seeking reliable machinery solutions.
CHEESE MACHINES
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the motor, with frequency converter and a separate control panel on top of the cheese vat for controlling the process.
Additional features:
Set of 2x pieces available, Stocknumber #1005 and #1006.
Type Of Machine: Closed cheese vat
Capacity: 8.000 ltr
Double Jacketed: Yes
Whey Suction Device: Yes
Total Dimensions: 4,3 x 3,0 x 4,5 mtr
Weight: ± 3.200 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Tebel OST IV cheese vat manufactured?
This Tebel OST IV double jacketed closed cheese vat was manufactured in 1991.
Is this equipment second-hand?
This equipment is a second-hand machine.
What design features does this Tebel OST IV cheese vat have?
This Tebel OST IV cheese vat features a double jacketed design.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Tebel OST IV is a closed cheese vat designed for cheese production, manufactured by Tebel (Tetra Pak®) in 1991. This model features a capacity of 8,000 liters and is double-jacketed, allowing for indirect temperature control of the milk inside the vat through the injection of steam or hot water. The vat is constructed primarily from stainless steel AISI 304, ensuring durability and hygiene, with the exception of the drive unit.
The vat includes an integrated stirring and cutting mechanism, where cutting tools are welded to a horizontal shaft. This shaft is powered by a drive unit equipped with a frequency converter, enabling variable speed control. Notably, the cutting tools rotate in the opposite direction during cutting compared to stirring. The coagulum is precisely cut by sharp radial knives made of stainless steel. Whey is removed through a perforated suction pipe that is lowered into the whey to just below the surface, facilitating efficient separation.
The vat is designed with a slight inclination of 4% towards the bottom valve, which allows for effective discharge of the curd through this valve. For cleaning, the vat is equipped with four rotating CIP (Clean-In-Place) nozzles located at the top, aiding thorough sanitation after production runs.
Additional control features include a stainless steel MCC panel located at the rear near the motor, housing the frequency converter, and a separate control panel mounted on top of the cheese vat for process management.
Two units of this model are available, identified by stock numbers #1005 and #1006. Both tanks are large stainless steel cylinders equipped with blue motorized components on the front side, and electrical control boxes with emergency stop buttons are mounted on the tanks. The tanks are supported on wooden blocks and have metal safety railings with mesh guards on associated platforms, enhancing operator safety.
The tanks exhibit some surface dirt, light wear, scuff marks, and minor discoloration, but no visible structural damage. The blue motors show signs of paint chipping and some rust spots. Coiled cables or hoses are attached to the motor components. Overall, these cheese vats present a robust design suitable for industrial cheese production processes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 167 |
| Last activity | Nov. 1, 2026 |
Hamburg Machinery is a leading player in the machinery manufacturing sector, based in Germany. With a rich heritage and a commitment to innovation, the company specializes in providing high-quality machinery solutions tailored to meet the diverse needs of various industries. Their extensive product range includes cutting-edge equipment designed for efficiency, reliability, and performance, ensuring that clients can achieve their operational goals with ease. At Hamburg Machinery, customer satisfaction is at the forefront of their mission. The company prides itself on its ability to deliver customized solutions that not only enhance productivity but also drive cost-effectiveness for businesses. Their team of experienced professionals works closely with clients to understand their unique requirements, providing expert guidance and support throughout the entire process. In addition to manufacturing, Hamburg Machinery is dedicated to sustainability and environmental responsibility. They continuously strive to implement eco-friendly practices in their operations, ensuring that their products contribute to a greener future. With a strong focus on research and development, the company is constantly evolving, integrating the latest technologies to stay ahead in a competitive market. Whether you are looking for advanced machinery for manufacturing, construction, or other industrial applications, Hamburg Machinery stands out as a trusted partner. Their commitment to quality, innovation, and customer service makes them a preferred choice for businesses seeking reliable machinery solutions.
Двукорпусен затворен казан за сирене OST IV на Tebel (Tetra Pak®) втора употреба
Použitá dvouplášťová uzavřená sýrařská káď Tebel (Tetra Pak®) OST IV
Brugt Tebel (Tetra Pak®) OST IV dobbeltmantlet lukket ostekar
Gebrauchter Tebel (Tetra Pak®) OST IV Doppelmantel-Käsebottich
Μεταχειρισμένος κλειστός κάδος τυριού Tebel (Tetra Pak®) OST IV με διπλό μανδύα
Second-hand Tebel (Tetra Pak®) OST IV double jacketed closed cheese vat
Cuba de queso cerrada de doble camisa Tebel (Tetra Pak®) OST IV de segunda mano
Cuve à fromage fermée à double paroi OST IV de Tebel (Tetra Pak®) d'occasion
Rabljena Tebel (Tetra Pak®) OST IV dvostruko plaštena zatvorena kad za sir
Használt Tebel (Tetra Pak®) OST IV kettős köpenyes zárt sajtkád
Tino per formaggi chiuso a doppia parete di seconda mano Tebel (Tetra Pak®) OST IV
Naudota "Tebel" (Tetra Pak®) OST IV dvivamzdė uždara sūrio talpykla
Tweedehands Tebel (Tetra Pak®) OST IV dubbelwandig gesloten kaasvat
Używana zamknięta kadź do sera z podwójnym płaszczem Tebel (Tetra Pak®) OST IV
Tebel (Tetra Pak®) OST IV, em segunda mão, cuba de queijo fechada com camisa dupla
Tebel (Tetra Pak®) OST IV la mâna a doua, cuvă de brânză închisă, cu două învelișuri
Бывший в употреблении закрытый сырный чан Tebel (Tetra Pak®) OST IV с двойной рубашкой
Polovna Tebel (Tetra Pak®) OST IV dvostruko obložena zatvorena kad za sir
Begagnad Tebel (Tetra Pak®) OST IV dubbelmantlad sluten ostbehållare
İkinci el Tebel (Tetra Pak®) OST IV çift ceketli kapalı peynir teknesi
EN
- Languages
English (GB)