Contact us to receive an offer.
| Manufacturer | SW |
|---|---|
| Model | BA 600 2 |
| Year | 2003 |
| Location | Czech Republic
|
This listing features a horizontal machining center, model BA 600 2, manufactured by SW in 2003. The machine offers travel paths of 600 mm along the X-axis, 550 mm along the Y-axis, and 360 mm along the Z-axis, suitable for a variety of machining tasks. It is equipped with dual spindles spaced 600 mm apart, each capable of reaching a maximum speed of 5,000 rpm, allowing for efficient and versatile machining operations.
The tool handling system includes two 25-position tool changers, enabling the use of multiple tools without manual intervention, which enhances productivity. The machine is also equipped with an NC rotary table and a magnetic chip conveyor belt, facilitating complex machining processes and efficient chip removal.
The control system is a Siemens Sinumerik 840 D, known for its reliability and advanced functionality in CNC machining centers.
Visible features include sliding transparent doors at the front, providing convenient access to the machining area while maintaining safety during operation. A control panel with buttons and an emergency stop is located on the right side of the machine for operational control and safety measures. Additionally, two hoses are hanging on the right side, which are likely intended for coolant or air supply.
The exterior of the machine shows signs of wear consistent with use and includes some rust or staining on the front lower panel. Despite these cosmetic issues, the overall structure appears intact. Potential buyers should consider these visible conditions when evaluating the machine.
This machining center is suitable for buyers looking for a versatile horizontal machining solution with substantial working area and tooling capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: Machining centers - horizontal BA 600 2
Manufacturer: SW
Model: BA 600 2
Year of Manufacture: 2003
Technical Condition: Good technical condition, testing possible after prior agreement
Control System: Siemens, type Sinumerik 840 D
Travel Paths:
- Axis X: 600 mm
- Axis Y: 550 mm
- Axis Z: 360 mm
Spindle Configuration: 2x spindle, spindle distance 600 mm
Maximum Spindle Speed: 5,000 rpm
Tool Changer: 2x 25-position tool changer
Additional Features: NC rotary table, magnetic chip conveyor belt
State: Visible
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 64 |
| Last activity | Nov. 12, 2026 |
Offer Title: Machining centers - horizontal BA 600 2
Manufacturer: SW
Model: BA 600 2
Year of Manufacture: 2003
Technical Condition: Good technical condition, testing possible after prior agreement
Control System: Siemens, type Sinumerik 840 D
Travel Paths:
- Axis X: 600 mm
- Axis Y: 550 mm
- Axis Z: 360 mm
Spindle Configuration: 2x spindle, spindle distance 600 mm
Maximum Spindle Speed: 5,000 rpm
Tool Changer: 2x 25-position tool changer
Additional Features: NC rotary table, magnetic chip conveyor belt
State: Visible
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a horizontal machining center, model BA 600 2, manufactured by SW in 2003. The machine offers travel paths of 600 mm along the X-axis, 550 mm along the Y-axis, and 360 mm along the Z-axis, suitable for a variety of machining tasks. It is equipped with dual spindles spaced 600 mm apart, each capable of reaching a maximum speed of 5,000 rpm, allowing for efficient and versatile machining operations.
The tool handling system includes two 25-position tool changers, enabling the use of multiple tools without manual intervention, which enhances productivity. The machine is also equipped with an NC rotary table and a magnetic chip conveyor belt, facilitating complex machining processes and efficient chip removal.
The control system is a Siemens Sinumerik 840 D, known for its reliability and advanced functionality in CNC machining centers.
Visible features include sliding transparent doors at the front, providing convenient access to the machining area while maintaining safety during operation. A control panel with buttons and an emergency stop is located on the right side of the machine for operational control and safety measures. Additionally, two hoses are hanging on the right side, which are likely intended for coolant or air supply.
The exterior of the machine shows signs of wear consistent with use and includes some rust or staining on the front lower panel. Despite these cosmetic issues, the overall structure appears intact. Potential buyers should consider these visible conditions when evaluating the machine.
This machining center is suitable for buyers looking for a versatile horizontal machining solution with substantial working area and tooling capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 64 |
| Last activity | Nov. 12, 2026 |
Хоризонтален обработващ център SW BA 600 2
Horizontální obráběcí centrum SW BA 600 2
SW BA 600 2 Vandret bearbejdningscenter
SW BA 600 2 Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας SW BA 600 2
Machining centers - horizontal BA 600 2
Centro de mecanizado horizontal SW BA 600 2
Centre d'usinage horizontal SW BA 600 2
Horizontalni obradni centar SW BA 600 2
SW BA 600 2 Vízszintes megmunkáló központ
Centro di lavoro orizzontale SW BA 600 2
Horizontalus apdirbimo centras SW BA 600 2
SW BA 600 2 Horizontaal bewerkingscentrum
Centrum obróbcze poziome SW BA 600 2
Centro de maquinação horizontal SW BA 600 2
Centru de prelucrare orizontal SW BA 600 2
SW BA 600 2 Горизонтальный обрабатывающий центр
Horizontalni obradni centar SW BA 600 2
SW BA 600 2 Horisontellt bearbetningscenter
Yatay işleme merkezi SW BA 600 2
EN
- Languages
English (GB)