Contact us to receive an offer.
| Manufacturer | Strojárne Piesok |
|---|---|
| Model | CNTA 3150/6,3 |
| Year | 1991 |
| Location | Czech Republic
|
Type and manufacturer
CNTA 3150/6.3 hydraulic guillotine shear manufactured by Strojárne Piesok. Year of manufacture: 1991.
Key technical specifications
- Maximum cutting length: 3,150 mm
- Maximum sheet thickness: 6.3 mm
- Minimum sheet thickness: 0.6 mm
- Overhang in stands: 200 mm
- Cutting angle: 0.5–1.5°
- Number of cuts: up to 50 cuts per minute
Physical data
- Machine weight: 7,200 kg
- Overall dimensions (L × W × H): approximately 3,800 × 2,350 × 2,000 mm
Description
This CNTA 3150/6.3 is a stationary hydraulic guillotine shear sized for sheet cutting tasks that fit within the stated length and thickness limits. The unit’s cutting length of 3,150 mm and maximum thickness rating of 6.3 mm define the working range for typical sheet-metal cutting operations. The specified minimum thickness (0.6 mm) and adjustable cutting angle (0.5–1.5°) allow processing of relatively thin materials with a controlled shear angle. The listed throughput is up to 50 cuts per minute under appropriate operating conditions.
Logistics and handling notes
The machine’s listed weight (7,200 kg) and approximate footprint (3,800 × 2,350 × 2,000 mm) should be considered when planning transport, installation and floor loading. Adequate lifting equipment and a suitable mounting area will be required.
What is provided
The description above reflects the machine type, manufacturer, year and technical and physical specifications as listed. No additional components, accessories or condition statements are included beyond these provided specifications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type: CNTA 3150/6.3
Parameters: 3150 mm, 6.3 mm
Manufacturer: Strojárne Piesok
Year of manufacture/SO/GO: 1991/-/-
Description: Basic technical parameters
Maximum cutting length: 3150 mm
Maximum sheet thickness: 6.3 mm
Minimum sheet thickness: 0.6 mm
Overhang in stands: 200 mm
Cutting angle: 0.5–1.5°
Number of cuts: Up to 50 cuts per minute.
Dimensions and weight
Machine weight: 7,200 kg
Dimensions (L x W x H): Approximately 3800 x 2350 x 2000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 7, 2026 |
Type: CNTA 3150/6.3
Parameters: 3150 mm, 6.3 mm
Manufacturer: Strojárne Piesok
Year of manufacture/SO/GO: 1991/-/-
Description: Basic technical parameters
Maximum cutting length: 3150 mm
Maximum sheet thickness: 6.3 mm
Minimum sheet thickness: 0.6 mm
Overhang in stands: 200 mm
Cutting angle: 0.5–1.5°
Number of cuts: Up to 50 cuts per minute.
Dimensions and weight
Machine weight: 7,200 kg
Dimensions (L x W x H): Approximately 3800 x 2350 x 2000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Type and manufacturer
CNTA 3150/6.3 hydraulic guillotine shear manufactured by Strojárne Piesok. Year of manufacture: 1991.
Key technical specifications
- Maximum cutting length: 3,150 mm
- Maximum sheet thickness: 6.3 mm
- Minimum sheet thickness: 0.6 mm
- Overhang in stands: 200 mm
- Cutting angle: 0.5–1.5°
- Number of cuts: up to 50 cuts per minute
Physical data
- Machine weight: 7,200 kg
- Overall dimensions (L × W × H): approximately 3,800 × 2,350 × 2,000 mm
Description
This CNTA 3150/6.3 is a stationary hydraulic guillotine shear sized for sheet cutting tasks that fit within the stated length and thickness limits. The unit’s cutting length of 3,150 mm and maximum thickness rating of 6.3 mm define the working range for typical sheet-metal cutting operations. The specified minimum thickness (0.6 mm) and adjustable cutting angle (0.5–1.5°) allow processing of relatively thin materials with a controlled shear angle. The listed throughput is up to 50 cuts per minute under appropriate operating conditions.
Logistics and handling notes
The machine’s listed weight (7,200 kg) and approximate footprint (3,800 × 2,350 × 2,000 mm) should be considered when planning transport, installation and floor loading. Adequate lifting equipment and a suitable mounting area will be required.
What is provided
The description above reflects the machine type, manufacturer, year and technical and physical specifications as listed. No additional components, accessories or condition statements are included beyond these provided specifications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 7, 2026 |
Хидравлична гилотинна ножица Strojárne Piesok CNTA 3150/6,3
Hydraulické gilotinové nůžky Strojárne Piesok CNTA 3150/6,3
Strojárne Piesok CNTA 3150/6,3 Hydraulisk guillotinesaks
Strojárne Piesok CNTA 3150/6,3 Hydraulische Tafelschere
Υδραυλικά ψαλίδια γκιλοτίνας Strojárne Piesok CNTA 3150/6,3
Strojárne Piesok CNTA 3150/6,3 Hydraulic guillotine shear
Cizalla guillotina hidráulica Strojárne Piesok CNTA 3150/6,3
Cisaille guillotine hydraulique Strojárne Piesok CNTA 3150/6,3
Hidraulične giljotinske škare Strojárne Piesok CNTA 3150/6,3
Strojárne Piesok CNTA 3150/6,3 Hidraulikus lemezolló
Cesoia a ghigliottina idraulica Strojárne Piesok CNTA 3150/6,3
Strojárne Piesok CNTA 3150/6,3 Hidraulinės giljotininės žirklės
Strojárne Piesok CNTA 3150/6,3 Hydraulische guillotineschaar
Hydrauliczne nożyce gilotynowe Strojárne Piesok CNTA 3150/6,3
Guilhotina hidráulica Strojárne Piesok CNTA 3150/6,3
Foarfeci ghilotină hidraulice Strojárne Piesok CNTA 3150/6,3
Strojárne Piesok CNTA 3150/6,3 Гидравлические гильотинные ножницы
Hidraulične giljotinske makaze Strojárne Piesok CNTA 3150/6,3
Strojárne Piesok CNTA 3150/6,3 Hydraulisk giljotinsax
Hidrolik giyotin makası Strojárne Piesok CNTA 3150/6,3
EN
- Languages
English (GB)