Contact us to receive an offer.
| Manufacturer | Strojarne Piesok |
|---|---|
| Model | CNTA 3150/16 |
| Year | 1990 |
| Location | Poland
|
| Category | Cutting - CNC guillotine shears |
| Max. cutting thickness | 16 mm |
| CNC | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Last availability date | 29/10/2025 |
| Product id | P220920028 |
| Language |
Strojarne Piesok CNTA 3150/16
Nůžky CNC Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16 CNC Schere
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16 CNC shears
Cizallas CNC Strojarne Piesok CNTA 3150/16
Cisaille CNC Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Cesoia CNC Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Gilotyna strojarne piesok 3150/16 po kapitalnym remoncie
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16 Ножницы с ЧПУ
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
CNC makasları Strojarne Piesok CNTA 3150/16
|
This Strojarne Piesok CNTA 3150/16 guillotine shear, manufactured in 1990, is designed for industrial cutting tasks with a maximum cutting thickness of 16.0 mm. The machine has been extensively renovated, featuring a completely new CNC control system based on Delta Electronics automation and software. The renovation included dismantling all hydraulic components for thorough inspection and repair, alongside a full mechanical overhaul to ensure operational integrity.
The upgraded CNC controls provide advanced functionalities such as setting the working depth of the knife to optimize cutting time for narrow details, positioning the cut material stop, adjusting the working angle of the knife, and counting cuts. It also allows programming up to 50 cutting sequences per sheet, enabling automatic changes in depth settings, bumper settings, sheet thickness, knife angle, and cutting width. This feature facilitates efficient shearing of entire sheets or multiple details in a predetermined order without manual intervention.
Additional modern enhancements include a mechanism for automatic adjustment of the knife gap, replacing the standard manual adjustment, a soft starter for smooth motor startup, and a time switch for the main engine that reduces power consumption, noise, and wear by shutting down the motor after idle periods. The cutting depth bumper drive is also upgraded with a Delta Electronics servo mechanism. Structural elements have been sandblasted and repainted for durability.
The machine's exterior is predominantly gray and black with yellow safety guards at the front edge. It includes yellow adjustable clamps or supports on the front table surface to hold material securely during operation. A control panel featuring buttons and a screen is mounted on the left side of the machine, and an emergency stop button is located on the right side of the front panel, enhancing operational safety. Mechanical components such as a mechanical arm and gear mechanism are mounted on the side panel, with cables protected by plastic wrapping. The machine is currently situated outdoors, as indicated by visible surroundings including dirt ground and industrial structures.
The brand name 'novectro' is visible on metal plates on the upper front side of the machine, indicating possible collaboration or component sourcing. This guillotine shear combines robust construction with modern CNC capabilities, making it suitable for precise and programmable cutting tasks in industrial settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The guillotine has undergone extensive renovation and has been equipped with a completely new CNC control.
The machine was dismantled with all the hydraulics to the "last screw".
Works performed:
- full inspection and renovation of hydraulics,
- full mechanical inspection and repair,
- assembly of CNC control based on automation from Delta Electronics +
software,
- assembly of the mechanism for changing the gap between the knives,
(standard adjustment is manual),
- execution of a complete, new electrical and control installation,
- smooth starting of the main motor on the softstarter,
- main engine time switch (engine shutdown after a certain time
idle - reducing power consumption, reducing noise, reducing wear
oil and hydraulic pump),
- assembly of the cutting depth bumper drive based on the Delta servo mechanism
Electronics,
- sandblasting of structural elements + application of a new paint coating.
The new controls include:
- setting the working depth of the knife (cutting width - shortening the cutting time
narrow details)
- setting the position of the cut material stop
- setting the working angle of the knife
- cuts counter
- setting a specific number of cuts
- possibility to program the sequence of cuts up to 50 operations for one sheet
(automatic change of depth settings, bumper settings, sheet thickness, angle
knife settings, cutting width) after each cut. This enables shearing
the entire sheet or other details in a given order, without the need for continuous operation
translate sheets
- possibility to program 50 cutting sequences
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery manufacturer |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | June 11, 2026 |
The guillotine has undergone extensive renovation and has been equipped with a completely new CNC control.
The machine was dismantled with all the hydraulics to the "last screw".
Works performed:
- full inspection and renovation of hydraulics,
- full mechanical inspection and repair,
- assembly of CNC control based on automation from Delta Electronics +
software,
- assembly of the mechanism for changing the gap between the knives,
(standard adjustment is manual),
- execution of a complete, new electrical and control installation,
- smooth starting of the main motor on the softstarter,
- main engine time switch (engine shutdown after a certain time
idle - reducing power consumption, reducing noise, reducing wear
oil and hydraulic pump),
- assembly of the cutting depth bumper drive based on the Delta servo mechanism
Electronics,
- sandblasting of structural elements + application of a new paint coating.
The new controls include:
- setting the working depth of the knife (cutting width - shortening the cutting time
narrow details)
- setting the position of the cut material stop
- setting the working angle of the knife
- cuts counter
- setting a specific number of cuts
- possibility to program the sequence of cuts up to 50 operations for one sheet
(automatic change of depth settings, bumper settings, sheet thickness, angle
knife settings, cutting width) after each cut. This enables shearing
the entire sheet or other details in a given order, without the need for continuous operation
translate sheets
- possibility to program 50 cutting sequences
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Cutting - CNC guillotine shears |
| Max. cutting thickness | 16 mm |
| CNC | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Last availability date | 29/10/2025 |
| Product id | P220920028 |
| Language |
Strojarne Piesok CNTA 3150/16
Nůžky CNC Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16 CNC Schere
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16 CNC shears
Cizallas CNC Strojarne Piesok CNTA 3150/16
Cisaille CNC Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Cesoia CNC Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Gilotyna strojarne piesok 3150/16 po kapitalnym remoncie
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16 Ножницы с ЧПУ
Strojarne Piesok CNTA 3150/16
Strojarne Piesok CNTA 3150/16
CNC makasları Strojarne Piesok CNTA 3150/16
|
This Strojarne Piesok CNTA 3150/16 guillotine shear, manufactured in 1990, is designed for industrial cutting tasks with a maximum cutting thickness of 16.0 mm. The machine has been extensively renovated, featuring a completely new CNC control system based on Delta Electronics automation and software. The renovation included dismantling all hydraulic components for thorough inspection and repair, alongside a full mechanical overhaul to ensure operational integrity.
The upgraded CNC controls provide advanced functionalities such as setting the working depth of the knife to optimize cutting time for narrow details, positioning the cut material stop, adjusting the working angle of the knife, and counting cuts. It also allows programming up to 50 cutting sequences per sheet, enabling automatic changes in depth settings, bumper settings, sheet thickness, knife angle, and cutting width. This feature facilitates efficient shearing of entire sheets or multiple details in a predetermined order without manual intervention.
Additional modern enhancements include a mechanism for automatic adjustment of the knife gap, replacing the standard manual adjustment, a soft starter for smooth motor startup, and a time switch for the main engine that reduces power consumption, noise, and wear by shutting down the motor after idle periods. The cutting depth bumper drive is also upgraded with a Delta Electronics servo mechanism. Structural elements have been sandblasted and repainted for durability.
The machine's exterior is predominantly gray and black with yellow safety guards at the front edge. It includes yellow adjustable clamps or supports on the front table surface to hold material securely during operation. A control panel featuring buttons and a screen is mounted on the left side of the machine, and an emergency stop button is located on the right side of the front panel, enhancing operational safety. Mechanical components such as a mechanical arm and gear mechanism are mounted on the side panel, with cables protected by plastic wrapping. The machine is currently situated outdoors, as indicated by visible surroundings including dirt ground and industrial structures.
The brand name 'novectro' is visible on metal plates on the upper front side of the machine, indicating possible collaboration or component sourcing. This guillotine shear combines robust construction with modern CNC capabilities, making it suitable for precise and programmable cutting tasks in industrial settings.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | June 11, 2026 |
EN
- Languages
English (GB)